Galvanized Drywall Angle Corner Bead

Galvanized  drywall angle corner bead corner bead description: there are two kinds of edges for this corner bead: one is with edges, edge width 5mm-10mm, another is without edges using this sheet is very quick and simple by applying plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh wings are then firmly placed in to the dabs of plaster resulting in the bead being set firmly and projecting sufficiently to the required thickness of the plaster on both sides of the corner. The corner of the bricks is fixed by using galvanized nails or wire tying. Lengths are available in standard as well as custom made lengths. Wing length ranges from 35mm to 45m. Bead length is available in 2 metre, 2.4 metre and 3.4 metres. Application: corner bead is expanded or perforated with galvanized steel plate or stainless steel plate. Corner bead with expanded wings can combined with plaster firmly, which canform a smooth, flat corner concise, meanwhile protecting the corner to prevent fragmentation, and easy construction, low cost, can save a lot of time. Product features: 1, corner bead was made with high quality galvanized material on both sides, which can be anti aging, corrosion resistant, prevent rust. 2, corner bead behave precise angle size design, to avoid the impact of the corner concentrated force, the external force evenly dispersed to the surrounding edge, ffectively protect the integrity.