Block Bonding Adhesive, Grade : ACE Grade, Analytical Grade, Technical Grade

aac block adhesive aac block adhesive manufature is a factory prepared blend of carefully selected raw materials, portland cement and graded aggregates and polymers. designed for use with water to produce high strength thixotropic mortar, for laying aerated lightweight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of up to 12mm thickness, that meet and exceed the requirements of national and international approximately 200 sq.ft. per 50 kg bag when used at 2-3mm bed thickness coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. surface preparationif a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of adhesive for construction of block work.ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, existing paints, loose plaster etc.mixing the product can be mixed by hand pour water in a clean container and then add the powder sun block adhesive until the mixture becomes creamy and plastic. leave the mix to slake for 5-10 min and remix before use. mix only sufficient quantity of adhesive for the immediate need.