Thread Locking Adhesive

Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

We are a well-known Manufacturer, Exporter and Supplier of Thread Locking Adhesive in the market. Our Trubond Thread Locking Adhesive is widely used for sealing, locking and preventing the threaded....

View More Details

Send Enquiry

Product Details

We are a well-known Manufacturer, Exporter and Supplier of Thread Locking Adhesive in the market. Our Trubond Thread Locking Adhesive is widely used for sealing, locking and preventing the threaded fasteners from corrosion or various environments. Our Thread Locking Adhesive can be used in the place of spring washers, pins and other traditional mechanical locking methods. We make available our Thread Locking Adhesive at very competitive market prices.

9221 Threadlocking Adhesive :

Low viscosity
Suitable for most metal surfaces.
Ideals for fasteners diameters of M2-M12, controlled lubrcity.

9242 Threadlocking Adhesive :

Medium strength
General purpose, thixotropic viscosity. For locking and sealing M6-M20 threads.
Parts can be separated using hand tools, controlled lubricity, can attain accurate clamp loads.

9262 Threadlocking Adhesive :

Medium to high strength
Thixotropic viscosity, excellent chemicals resistance.
Suitable for most metal surfaces, for fasteners smaller than M20.
A permanent threadlocker, Excellent for preventing rust and corrosion in extreme chemical / environmental conditions.

9271 Threadlocking Adhesive :

High strength,low viscosity
For permanent locking and sealing, fasteners smaller than M36.
Heating and tools required for disassemble.

9277 Threadlocking Adhesive :

High strengthHigh viscosity, excellentÂ chemicals resistance.
For permanent locking and sealing bolts up to M36.
Prevent rust and corrosion of threaded fasteners. Heating and hand tools required for disassemble.

9222 Threadlocking Adhesive :

Low strength, thixotropic viscosity
Suitable for most metal surfaces, Parts can be disassemble with hand tools.
Ideals for fasteners diameters of M6 and smaller, controlled lubricity can attain accurate clamp loads.

9243 Threadlocking Adhesive :

Oil resistant, medium strength
Fast curing, used on inert surface, improved oil tolerant, easy to disassemble, can be applied on surfaces with oil.
For fasteners smaller than M20.

9270 Threadlocking Adhesive :

High strength, Low viscosity & fast curing.
For permanent locking and sealing,fasteners smaller than M36.

9272 Threadlocking Adhesive :

High temperature/high strength
Withstands temperatures up to 230^oC.
For locking and sealing the thread of cylinder without being cleaned.
Provides a fast cure on most surfaces, including received fasteners.
Recommended for bolts up to M36. Heating and hand tools required for disassemble.

9290 Threadlocking Adhesive :

Wicking grade
Medium strength, low viscosity. fast curing.
For locking and sealing pre-assembled bolts M2 12. Also for sealing welds and porous metal parts.
Prevent rust and corrosion. Heating and tools required for disassemble.

Specifications

Product Code	Container	Color	Viscosity(mPa.S)	Prevail torque(N.m)	Break torque(N.m)	Gap fill(mm)	Temperature range(^oC)	Fixture time/full cure time
9221	10ml, 50ml & 250ml	Purple	100-150	2¡«8	5¡« 12	0.13	-50-150	10min/24hrs
9222	10ml, 50ml & 250ml	Purple	800-1600 Thixotropic	2¡«6	3¡«9	0.13	-50-150	20 min /24 hrs
9242	10ml, 50ml & 250ml	Blue	800-1600 Thixotropic	4¡«10	8¡«17	0.13	-50-150	20 min /24 hrs
9243	10ml, 50ml & 250ml	Blue	1500-3000 Thixotropic	4¡«10	15«25	0.13	-50-150	20 min /24 hrs
9262	10ml, 50ml & 250ml	Red	1200-2400 Thixotropic	15¡«25	14¡«25	0.13	-50-150	20 min /24 hrs
9270	10ml, 50ml & 250ml	Green	400¡«600	25¡«45	15¡«25	0.13	-50-150	15 min /24 hrs
9271	10ml, 50ml & 250ml	Red	200-600	25¡«40	12¡«30	0.13	-50-150	20 min /24 hrs
9272	10ml, 50ml & 250ml	Red	4000¡«15000	20¡«35	18¡«28	0.25	-50-230	30 min /24 hrs
9277	10ml, 50ml & 250ml	Red	6000¡«8000	23¡«40	20¡«35	0.25	-50-150	30 min /24 hrs
9290	10ml, 50ml & 250ml	Green	10¡«30	15¡«30	3¡«17	0.1	-50-150	20 min /24 hrs