Listing ID #1256664
Company Information
Ask for more detail from the seller
Contact Supplier
We supply a highly efficient Turnmaster-350 All Geared Head Lathe Machine. This Turnmaster-350 All Geared Head Lathe Machine is user friendly. Turnmaster-350 All Geared Head Lathe Machine is manufactured keeping in mind the specifications of our customers. Turnmaster-350 All Geared Head Lathe Machine has features that impress our buyers and have contributed in a big way to increase our standing in the market.
Features Of Turnmaster-350 All Geared Head Lathe Machine
Machine Equipped with
Range of Models
| Capacity. | ||
|---|---|---|
| Height of the Centres | 175 (7") | |
| Swing over bed | 350 (14") | |
| Swing over Cross Slide | 200 (8") | |
| Swing in Gap 'Y �' | 5 10 (20") | |
| Distance in front of face plate in Gap 'X | 140(5.5") | |
| Diameter of face Plate in Gap | 510 (20") | |
| Distance between Centres | ||
| ABC 600 | 600 (23") | |
| ABC 800 | 800 (31") | |
| ABC 1000 | - | |
| ABC 1500 | - | |
| ABC 1250 | - | |
| ABC 1650 | - | |
| ABC2000 | - | |
| Cross SlideTravel | 185 (7.5") | |
| Cross SlideResolution | 0.02 mm | |
| Bed | ||
| Bed Type | 2V,2 flat | |
| Bed Width | 244 | |
| Bed Length | - | |
| ABC 600 | 1458 (5') | |
| ABC 800 | 1700 (6') | |
| ABC 1000 | - | |
| ABC 1500 | - | |
| ABC 1250 | - | |
| ABC 1650 | - | |
| ABC2000 | - | |
| Main Spindle | ||
| Spindle Nose | A2-4 | |
| SpindleTaper Bore | Metric 45 | |
| Taper Bore in Centre Sleeve | MT 3 | |
| Spindle Bore | 40 | |
| Tail Stock | ||
| Quill Diameter | 50 | |
| Taper Bore in Spindle | MT 3 | |
| QuillTrave | 140 (5.5") | |
| Tool Slide | ||
| Travel Top Slide | 100 (4") | |
| Tool Shank Section | 20x 20 | |
| Tool SlideResolution | 0.02 | |
| Lead Screw | ||
| Lead Screw Diameter | 25.4 | |
| Pitch | 6.0 | |
| Speeds | ||
| No. of Speeds | 8 | |
| Range | 71-1800 | |
| Feeds | ||
| No. of Longitudinal Feeds | 24 | |
| Range of Feeds | 0.045 to 0.063 | |
| No. of Transverse Feeds | 24 | |
| Range of Feeds | 0.015 to 0.21 | |
| Ratio of Transverse Feed to Longitudinal Feeds | 1 // 3 | |
| Threads | ||
| No. of metric threads | 24 | |
| Range | 0.5 to 7 | |
| No. of inch threads | 24 | |
| Range | 56 to 4 TPI | |
| No. of Module Threads | 24 | |
| Range | 0.4 to 3.5 | |
| No. of DP Threads | 24 | |
| Range | 8 to 70 | |
| Maximum Weight of Workpiece held between Chuck and Tail Stock Centre | ||
| Dead centre | 185 | |
| LiveCentre | 150 | |
| Electricals | ||
| Main Motor | 2.2Kw | |
| (3HP) | ||
| Power Supply | 415V | |
| 3phase | ||
| 50 cycles | ||
| NC supply | ||
| Coolant Tank Capacity | 20 Itrs | |
| Weight | ||
| ABC 600 | 600 kg | |
| ABC 800 | 800 kg | |
| ABC 1000 | - | |
| ABC 1500 | - | |
| ABC 1250 | - | |
| ABC 1650 | - | |
| ABC2000 | - | |
| Floor Space Lx B | ||
| 600 ABC | 1800x 850 (6'x3') | |
| 800 ABC | 2000x 850 (6.5'x3') | |
| 1000 ABC | - | |
| 1500 ABC | - | |
| 1250 ABC | - | |
| 1650 ABC | - | |
| 2000 ABC | - | |
| Capacity of Steady Rest Bar Dia 'D' | ||
| PadTyp | MinimumDia | 10 (0.5") |
| Maximum Dia | 100 (4") | |
| RollerType | MinimumDia | 10 (0.5") |
| Maximum Dia | 75 (0.3") | |
| Capacity of FollowRest Bar Dia 'D' | ||
| PadTyp | MinimumDia | 10 (0.5") |
| Maximum Dia | 100 (4") | |
| RollerType | MinimumDia | 10 (0.5") |
| Maximum Dia | 75 (0.3") | |
| Capacity of taper Turning Attachment | ||
| MaximumTaper Angle on either side | 10o | |
| Stroke 'S' | 175 (7o) | |
| MaximumTurning Length 'L' | 125 (5o) | |
Connect with us
For Buyer 
For Seller 
Help 
