Bangalore, Karnataka, India
Our Complete range of products are Digital Panel Meters, Digital Counter and Preset Counter.
Electrical Specifications : voltmeter. •measurement Up to 300vac •accuracy 0.5% of Fsd. •auxiliary Supply 110v/240v ± 10%, 50/60hz. •crest Factor Up to 3. •operating Temp. 0° to 55° C. •storage Temp. -20° to 70°c. •display Colour- Red electrical Specifications : ammeter. •measurement Up to 20a. •accuracy 0.5% of Fsd. •auxiliary Supply 110v/ 240v ± 10%, 50/60 Hz. •crest Factor Up to 3. •operating Temp. 0° to 55° C. •storage Temp. -20° to 70°c. •display Colour- Red key Features: true Ac Rms Measurement With crest Factor of 3.0 At Fs fast Response accurate to 0.5% @ Full Scale. mechanical Specifications 48x96x85 Mm
We are offering microprocessor based digital preset counter / timer with memory. Micro processor based 5-digit preset counter / timer with memory - pgd725 -can be programmed as per customer requirement. The preset values could be set using switches on the front panel. the unit comes with 5 digits each in 2 rows. 10mm size 7 segment led display for process value and 8mm 7 segment display for preset value. The overall size of the unit is 72mm square with a depth of 110mm. The panel cut out size should be 68mm square. Normaly the unit comes with pnp sensor or potential free contact inputs. On request npn sensor / 24 vdc / limit switch inputs can be provided. A 12 vdc input is inbuilt for proximity sensors. Relay on time setting or auto reset is an inbuilt option. Additional features includes, provision to have 2 inputs and 2 relay outputs, external reset, works as a 2 individual units, programmable as per customer requirement like a dual preset timer or counter, cyclic timer, hour timer, length counter, timer cum counter, multi set counter or timer with a single input or two etc... Supply voltage for the unit is 230 vac and output, 2 individual spdt relay out puts of 5 amps each at 230 vac.
He microprocessor based hardware unit is convertible as counter or timer with single relay output. Supply voltage can be 110 VAC and 230 VAC. The unit have external reset / Auto reset / Auto reset time settable options. The input can be proximity sensor / potential free contact / 24 VDC. The process value is displayed in 4 digit 7 segment led display of 0.5 inch size. The setting can be done through front panel thump-wheel switch. Maximum count value is 9999. The size of the unit is 72 X 72mm with Panel cut cut size of 69 X 69mm and depth of 115mm.