Ambala, Haryana, India GST : 06AACCR8985N1ZI Verified Supplier
We offer the best product range of Microtome, Rocking Microtome, Sliding Microtome, Volumetric Flask and Measuring Cylinder.
Cambridge Rocking Microtome Model RMT - 10 is very well known and one of the best established microtomes in the world, which has given outstanding service to numerous microtomists through the years. It is designed for sectioning comparatively soft, wax-embedded tissues with a thickness range of 2 µm to 24 µm, in steps of 2 µm. Calibrated in 2 micron divisions, the section cutting thickness can be set easily and quickly by a single control. It is recommended for elementary biology & pathology students. The rocking microtome is an extremely reliable instrument comprising of three moving parts. The lead screw mechanism incorporates quality precision engineering and the cutting stroke is controlled by a single control lever which minimizes the operator skill required. It carries wide choice of specimen holders cylindrical holders, standard orientating & wood block holders for sectioning wax embedded specimens. Overall Dimensions 390x200x200 mm Nett. Weight 4 kgs Size of the cabinet 450x240x260mm Gross Weight 10 Kgs. Least count 0.01mm Dimensions of the Case 200x220x90mm
Sliding Microtome Model RMT - 45 is a standard sectioning instrument especially designed for Research Laboratories for cutting sections of paraffin as well as celloiden embedded specimens. Sliding Microtome is having the advantage of vertical object feed by Micrometer Screw and Cylinder so rigidly held that perfect immobility under the knife is ensured, even when cutting relatively large, hard and in homogeneous specimens. The heavy knife block mounted on slideways can be actuated entirely by hand. The Microtome comprises of a stable heavy cast base stand on a precise sliding track over which slides a sturdy knife holder. Its smooth and efficient operation has a great advantage of vertical object feed. The object holder has rapid vertical adjustment by means of a lever mechanism. Placed below the object holder is a drip pan for excess alcohol or water. its knife holder rigidly supports a 120mm knife made from imported fine grain hard tool steel, which ensures accurate sectioning not only of soft tissues but also harder materials such as stem, root and other objects etc. Sliding Microtome is recommended to the labs where sections of fairly large specimens are required. Feed adjustments 0-50 mm micron in steps of one micron each Overall Dimensions 41 x 35 x 28 cms. Length of sliding track 40 cm. Net Weight 25 Kgs. Automatic feed 1 - 25 Max. vertical object displacement 32 mm. Manual feed 1-30 Object - Holders size 40 x 40 mm., 55 x 55 mm. and 60 x 55 mm.
Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage. These flasks are available in following capacities:
Measuring Cylinders Hexagonal (PP) Measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent. These cylinders are available in following capacities:
Equipped with latest micro switch mechanism for trouble free performance and convenience in use.Complete with latest built in safety device to protect tissues from 10th stage and 11th to 12th stage that is in wax during electric failure. Standard Accessories Supplied with Instruments :- 2 Electronically Controlled Wax Bath 10°C to 80°C. 1 Stainless Steel Basket Rotor. 1 Stainless Steel Basket. 24 Tissue Capsules 10 Beakers 1Ltrs. 2 Nos. Thermostatically Controlled Wax Bath 6 Nos. Calibrated Timer Disc and One Cutting Piller. Dust Cover & Instruction Manual
Features: Table Top Stainless steel centrifuge bowl of 304 quality Very stable low noise No vibration Elegant design High Quality High Performance Specifications: Heavy duty C.R.C. construction finished with powder coating Fitted with brushless automatic balanced motor Microprocessor based, 4 lines, 20 characters. LCD Display of set time, run time, set and run rpm, rcf. Equipped with 0-99 minute timer. Programmable speed regulator to control speed from 500 to 6000 r.p.m depending upon the type of rotor & Fast spin option. 50 programmes can be stored in memory. Automatic rotor identification on display. Additional electronic lid lock which does not allow to open lid when machine is running. Dynamic brake (automatic) and imbalance detector are provided. Selection of 3 acceleration + 4 deceleration profile. 4 Max. Rotor Heads available for this machine are following: Swing bucket Rotor 32 x 15 ml. Max Speed on the head 4000 rpm Angle rotor 36 x 15 ml Max Speed on the head 4000 rpm Swing Bucket Rotor 48 x 7 ml. Max Speed on the head 4000 rpm Swing Bucket Rotor 48 x Vacuutainers Max Speed on the head 4000 rpm Angle Bucket Rotor 4 x 100 ml. Max Speed on the head 5000 rpm
Desiccator - Plain (PP/PC) Plain Dessiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Specification: Size(mm) Flange(mm) I.D. (mm) 150 171 150 200 232 199 250 276 240 300 340 300
Salient Features: Digital wavelength selection with touch membrane switches. 9 digital filters 405 nm 630 nm. Latest LED based technology. Graphical battery indication. Auto power saving mode.
Thses Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclave Beakers have prominently raised graduations on the outer surface. Pouring solution becomes very conveninent because of its tapered spout. These beakers are available in following capacities: Other Details: 1. 50 ml lc. 5 2. 100 ml lc. 5 3. 250 ml lc. 10 4. 500 ml lc. 10 5. 1000 ml lc. 25 6. 2000 ml lc. 250
These sets consists of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds. These are available in two different sets: SENIOR SET: This set consists of 185 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour & size of ball. JUNIOR SET: This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box.
Needless to say, Laboratory Tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting. These trays are available in two different sizes:
Made of fast release device for precise pipetting & zip quick emptying. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber coller inside to hold various pipetters of standards sizes. It resists acids & alkalies and can be easily disassembled for through cleaning. These pipette pump are available in following capacities:
Dry Bath Incubator Specifications: 3.5 inches coloured TFT LCD Display. PID based temperature control. Ambient to 70 deg. C. 0 to 120 minute timer with graphical. Besides above, we are also manufacturing a wide range of Biological Industrial Microscopes, Rotary Microtomes, Automatic Tissue Processors, Profile Projectors, Illuminated Magnifiers, Sample Preparation Instruments Other Lab Equipment for the last four decades.
Specifications: General Purpose Bench Top Laboratory Centrifuge Machine. Heavy duty C.R.C. construction finished with powder coating. Double walled ABS injection moulded lid which is light weight to avoid accident. Inter lid lock and metallic centrifuge bowl for safety. Microprocessor based programmable speed control from 500 to 5200 r.p.m depending upon the type of rotor and Digital timer (0-59 minutes) 4 lines, 20 characters. LCD Display for set time, run time, set and run rpm, rcf. Last test parameter recall and display automatically on LCD. 50 programmes can be stored in memory and automatic rotor identification on display. Additional electronic lid lock which does not allow to open lid when machine is running and opens automatically after centrifuge time is over. Calibration window on lid. Dynamic brake (automatic) and imbalance detector are provided. Selection of 3 acceleration + 4 deceleration profile with fast spin option. Rotor Heads available for this machine are following: Swing Out 16x15ml. Max Speed on the head 4400 rpm Swing Out 12x15ml. Max Speed on the head 4400 rpm Swing Out 8x15ml. Max Speed on the head 5200 rpm Swing Out 6x50ml. Max Speed on the head 4000 rpm Swing Out 4x50ml. Max Speed on the head 4400 rpm Angle Heads 16x15ml. Max Speed on the head 5250 rpm Angle Heads 12x15ml. Max Speed on the head 5250 rpm Angle Heads 8x15ml. Max Speed on the head 5250 rpm Angle Heads 6x50ml. Max Speed on the head 5250 rpm Angle Heads 4x50ml. Max Speed on the head 5250 rpm Angle Heads 4x100ml. Max Speed on the head 4000 rpm Angle Heads 24x15ml. Max Speed on the head 4000 rpm Angle Head 24 Vacuutainers. Max Speed on the head 4000 rpm Angle Heads 32 tube of 12x75 mm Max Speed on the head 4000 rpm Angle Heads 12x100 mm of Borosil for serum separation Max Speed on the head 4000 rpm
Multi Tube Vortex Mixer with Accessories It is designed to facilitates hands-free mixing intubes, vials and cylinders. Variuos tube sizes can be mixed by simply changing the foam tube racks. This mixer is sturdy and quite in operation. Programmable Pulsing mode allows user to adjust the pulse-on and pulse-off times between 1-59 seconds in 1 second intervals. This features enhances the vortex action by creating a more vigorous mix. With vortexing, greater shearing forces are placed on materials in the bottom of a tube, thus promoting either disruption or solubility. Supply complete with Accessory Pack for Multi Tube Vortex Microtubes 1.5ml/2ml.
Specifications of ProgRes C14 Microscopy Camera with Features of Capture Pro: Continuous automatic exposure control Automatic white balance Multi-focus (Z- Stacking) Multi-fluorescence mode Measurement capabilities Image annotations Time-lapse Shading calibrations Multi-camera operation Individual user profiles Benefits of CapturePro: Included free of charge Ease of use Full support of Multicore-processors Full WIN support for all cameras (even WIN 7, 32 and 64 Bit) MAC support for FireWire cameras Free software updates for registered users Stand-alone software and TWAIN Plug-in Optional software development kit (SDK)
refrigerated laboratory centrifuge rst-70bl specifications: bench top refrigerated micro centrifuge machine, all purpose. heavy duty c.r.c construction finished with powder coating. stainless steel centrifugal bowl for extra protection & easy cleaning. fitted with well balanced brushless motor with electronic device. 4 lines, 20 characters. Lcd display for set time, run time set & run rpm, rcf. digital timer 0-99 timer, lid lock & fast spin option & rotor identification. dynamic brake(automatic) & imbalance detector are provided. last test parameter recall & displays automatically on lcd. microprocessor based. Programmable speed regulator from 2000 to 20000 rpm in variation of 100 rpm. selection of 3 acceleration + 4 deceleration profile. pid electronic digital temperature controller cum indicator is fitted to control the temperature of centrifuge from room temp. Upto -20°c temp. Accuracy when motor is also running is ± 2°c. technical parameter: max speed: 16000 rpm max rcf: 17000xg timer: 0-99 timer motor: brushless motor. temp. Range: from room temp to -8°c power: ac 220v 50hz 20a rotor optional
Features: Microprocessor based Motor remain cool even after running full time Motor fitted on anti vibration springs supported with rubber covering from inside and outside. Low sound, very stable Specifications: High speed Micro Centrifuge Max. R.P.M. 16000 and r.c.f 16600 Heavy duty plastic injection moulded body. Stainless Steel protection bowl. Fitted with well balance universal motor having long life with imported carbons. 2 lines of 16 character LCD display of r.p.m., R.c.f, timer 0-59 minutes Display of set and run time Digital timer which can be set from 0-99 minutes in interval of 1 minute. Programmable Speed Regulator from 2000 to 16000 in variation of 100 rpm Last test parameter recall and displays automatically on LCD Supply
Advance Rotary Microtome RMT-30A It is a universally approved, modern and reliable sectioning equipment designed for very precise sectioning of tissues upto 1 µm thickness. The feed indicator, located in front of microtome & is operated by the latest 'CAM DRIVE SYSTEM' for accurate feed setting from 1-50 µm in steps of 1 µm which is conveniently located in the front for instant references and its setting is controlled by a knurled knob at the front of the microtome. The interior mechanism rests on heavy metal base and is covered with a full protective cover for easier cleaning and lubrication. The salient features include independent feed mechanism with automatic safety device, universal knife holder with lateral movements permitting use of the entire knife edge, universal vice type object holder for accurate centring of the specimen. The instrument ensures life -long smooth operation. Individual components are fabricated and assembled using latest technology and selected material. The knife supplied with the microtome is fabricated from imported fine grain steel tested for micro-structure and is heat treated for optimum rigidity and sharpness. The following accessories are supplied with the microtome :- 1. Razor 120 mm with back and handle in box: 1No. 2. Object Holder Set of 3: 1No. 3. Low Profile Disposable Blade Holder: 1No. 4. Low Profile Disposable Blades: 5No. 5. Honing Stone in box: 1No. 6. Oil can: 1No. 7. Dust Cover: 1No 8. Illustrated operating manual: 1No.
RMT-35 is a semi-automated rotary microtome ideal for routine sectioning and research application in pathology, histopathology textile and other research laboratories. Easy operation, safety & high precision specimen feed, stable performance to provide high quality sectioning results. Universal specimen holder is provided along with a standard cassette holder for paraffin embedded tissues. FEATURES : All important controls are easily accessible and conveniently located. Operations are from display board. LCD Screen shows section thickness range. It has different sectioning modes such continuous, single step stroke and program mode. It has stepper motor with range of 30mm feed motion and vertical stroke of 60mm. The coarse feed mode for both forward and backward movement through separate feather touch switch. Knife holder designed to use with high profile & low profile disposable blades with two pressure plates. It has integrated knife guard to hold disposable knives firmly for vibration and charter free operation. Knife holder has lateral adjustment facility to use of entire length of disposable knife. Supplied with a standard universal chuck/block holder with precise adjustment in X and Y axis for orientation of specimen. Smooth hand wheel with integrated quick lock mechanism for safety of operator. External Enclosure/Large Waste Tray provided, which is easy to clean and unload the waste. It works on a power supply of 110-220 VAC at 50 Hz. Pack of 50 disposable high profile blades is supplied with the microtome with universal specimen holder, operating instruction & vinyl cover etc in a sturdy Wooden Storing Box. SEMI AUTOMATIC MICROTOME : features motorized specimen advance along with digital control and settings. Coarse feed specimen advance is automatic in semi-automatic microtome along with manually operated specimen feed handwheel. SECTIONING: Sectioning mode has section thickness range from 0.5-100 µm. Cutting thickness range can be customized by the user very easily as per requirement.
Hand & Tool Microtome We have gained recognition as an eminent enterprise, devotedly engaged in manufacturing, exporting and supplying a broad range of Hand & Tool Microtome. Features: Excellent functionality Long life span Optimum Performance The Hand Microtome is used to cut thin sections of Microscopic materials, such as specimen parts of plants and animals. It is considered as the basic form of a microtome permitting microtomic cuts by hand in a quick and accurate way. The microtome is suitable for practical courses in microscopy, for field work during excursions, for school education and for a serious amateur of biology. A well constructed hand operated bench microtome can be securely attached to the edge of any bench, table or work surface with the help of fixing clamp. The section platform has a smooth wide flat top and durable glass surface to guide the sectioning razor & to protect the hand. The feed screw has fine and long threads so that the embedded material may be advanced very gradually to cut thin sections easily. The Razor is made of surgical quality steel with 75mm cutting edge
RADICAL Rotary Microtome Model RMT-20 is a highly versatile sectioning device suitable for Medical Institutions, Research & Pathological Laboratories. This microtome has special application for cutting thin sections of histopathological specimens and also caters to the demands of industries such as Plastic, Leather, Textiles, Rubber & Fertilizer. It is ideal for those who want to avail advantages of a Rotary Microtome at a moderate cost. The entire mechanism stands on a heavy cast iron base ensuring stability and rigidity. Its compound slide ways of critical tolerances guide the specimen block. The metal hinged cover housing protects the internal mechanism against dust and paraffin waste, it can be conveniently opened for resetting, cleaning and lubricating. The Microtome is driven by a handle which can also be locked. Cutting sections are obtained in different thickness by mechanically operated crank through a knurled knob in front of the instrument. The knurled knob is graduated in microns for feed setting and ready reference. A detent click action ensures positive adjustments in one micron increment. The knife holder unit is equipped with a rotating knife clamp to adjust desired angles for best sectioning. It has forward and backward movements to ensure contact of specimen with the knife and lateral movement to get maximum use of knife edge. Smooth & accurate specimen movement is achieved with the time proven operating principles of the feed mechanism. Travel is entirely independent to the vertical movement of the specimen block. When the feed limit reaches to an end point, it disengages itself. To bring the feed screw back, the vice is pressed slightly and the main gear wheel is turned clockwise till the screw reaches its starting position. All parts are fabricated from selected alloys and the Microtome knife is manufactured from fine grain steel tested to maintain optimum sharpness strength. Feed adjustments 1-25 µm Overall Dimensions 30 x 33 x 28 cms Minimum thickness 1 µm Net Weight 25 Kgs. approx. Total Feed excursions 28mm. Gross Weight 35 Kgs. approx
Freezing Microtome Model RMT - 40 is designed to the full purpose of accurate and quick diagnosis in surgery and also for the inspection of quality of rubbes and others. It has a table clamping device. The specimen rises accurately and automatically by a handle. The CO2 freezing attachment is provided with a hard rubber non-conducting plate between the corrugated surface to which the object is frozen and the rest of the apparatus, which prevents the conduction of heat from the other parts of the apparatus to the specimen; thus saving time and CO2. In operating this freezing attachment the valve at the bottom should first be closed and valve at the cylinder slightly opened to admit the gas into the tube. The Automatic feed mechanism can be thrown out of action by turning the Index Finger to the extreme left or it may be set to cut sections of any desired thickness. Each division of the graduated scale marks 5 µm, the Microtome range being 5-40 µm. The sturdy Knife Holder can be tilted to a convenient angle of the Knife suitable to the object. Specifications :- Freezing Stage 35 mm. dia. Total Excursion of Feed 25 mm. Feed Range 5 - 40 µm in steps of 5 µm each Weight 13 kg. approx. Size (in case) 39 x 34 x 30 cm. High pressure flexible tubing 150 cm. (approx.)
CARBOY WITH STOPCOCK, (HDPE) Available Capacity: 5 Ltrs 50 Ltrs 10 Ltrs 20 Ltrs 25 Ltrs 50 Ltrs These carboys come with secure sealing cap for better security and long-term storage. These carboys are used for storing and shipping reagents, chemicals, culture media, and standards. These are very strong and durable for extended use over time with a strong carrying handle on both sides of the carboy. Comes with high quality and durable stopcock or tap for easy withdrawal of liquids, chemicals, reagents, culture media and standards.
Carrier Tray (PP): This autoclavable Polypropylene Tray has a unique feature i.e. its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly.
Plain Dessiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Specification: Size(mm) Flange(mm) I.D. (mm) 150 171 150 200 232 199 250 276 240 300 340 300
Fume Hood Complete Stainless Steel The work surface of granite is fitted with small wash basin & good quality tap. A gas cock is also fitted. Sliding sash made of Polycarbonate / toughened glass moves vertically up and down with concealed counter balanced weights. Chamber is fitted with 36W poly-carbonate fluorescent light assembly. Space underneath the work surface is provided with storage compartment. 15/5 Amp socket with switches is provided for light and exhaust system. Supplied with cord and plug to work on 220 volts 1/3 phase 50Hz A.C. Complete with motor blower for exhaust system and Duct to take out fumes. Fume Hood frame of S.S. 304 grade from outside & 316 grade inside. Model Particular: RH-60-01 Size 90x60x60cm RH-60-02 Size 120x60x60cm RH-60-03 Size 120x75x75cm RH-60-04 Size 150x75x75cm
Cambridge Rocking MicrotomeGet Best Quote