Our Products
Metal Working Fluid Metal Cleaner Oil / General Purpose Cleaner Oil Specification:
A Solvent based metal cleaner with no odour finds variety of uses in the following fields.
(a) Pre cleaning needs of any metal substracts for painting such as automobile, cars, buses, machinery, sign board, hoardings, exhibition panels, etc.
(b) Cleaning of minted coins, stamped/ forged metal articles / decorative pieces.
(c) Also acts as temporary rust preventive preserves rolled / coiled metal strips, wires, foils, etc.
(d) Prevents clogging of printing heads, paper in printer, screen printing maintenance etc.
Application / Composition :
Can be applied by brush, spray, swab easily removable by wiping with cloth.
Typical Properties :
Sr. No. | Properties | Eastto Met Clean | |||
Water White | |||||
1 | Appearance | ||||
2 | Odour | Odourless, Non – Offensive | |||
3 | Specific Gravity @ 29.5oC | 0 – 810 | |||
4 | % Water Content | Nil | |||
5 | Flash point( PMCC) 0C | 70 MIN. | |||
6 | Kinematic Viscosity at 40 0C, cst | 1.5 – 2.0 |
4T Motorcycle Oil / Supreme Motorcycle Oil 4T 20W- 40, 4T 20W-50 are high performance multi-grade 4 Stroke Engine oil that are blended from highly refined base stocks and specially selected additives to meet the high temperature operating conditions in air cooled 4 Stroke two wheelers with excellent oxidation stability and, control the sludge and varnish formations. These 4 Stroke Engine oil also provide protection against wear, long engine life, higher fuel efficiency and outstanding engine cleanness.
Supreme Motor Cycle Oil 4T 20W- 40, 4T 20W-50 are recommended for diesel passenger cars and commercial heavy duty diesel engines on-highway and off-highway equipment, like mining, earthmoving, construction industry and DG sets, and also for gasoline engines.
Meet the performance level of API SL / JASO T 903 (MA2 Specification).
CHARACTERISTICS | Supreme 4T 20W- 40 | Supreme 4T 20W-50 |
Kinematic Viscosity at 100°C., cSt | 15 | 17 |
Flash Point, °C. (COC), Min. | 200 | 200 |
TBN, mg KOH / gm | 6.0 | 6.0 |
Pour Point, °C. Max. | (-) 21 | (-) 21 |
Hydraulic Brake Fluid Dot 3 and 4 is a red dyed high performance premium quality fully synthetic heavy duty hydraulic brake fluid. It contains anti-oxidant, metal de-activator and corrosion inhibitor for long service life of brake fluid and brake components. Due to its high Equilibrium Reflux Boiling Point (above 205C), the vapour locking problem is greatly reduced in high temperature operating condition, especially in cities where stop-and -go conditions require frequent application of brakes. Its excellent low temperature characteristics enable it to function up to minus 40C.
Hydraulic Brake Fluid Dot 3 is recommended for modern hydraulic braking systems including both disc and drum type.
FMVSS 116 DOT 3
SAE J 1703
IS: 8654 2001
Hydraulic Brake Fluid Dot 4 is recommended for modern hydraulic braking systems including both disc and drum type in various new generation vehicles.
FMVSS 116 DOT 4. SAE J 1703
Hydraulic Brake Fluid oil mostly used and applicable in barrels in various maintenance work shops in garages area and in Fuel injection workshops or fuel injection industries and workshops across thousands of city shops in States of India .
We have surplus capacity to produce lubricant and this extra capacity can be used to cater other parties to manufacture/filling their brand of product by way of toll blending.
CHARACTERISTICS | Hydraulic Brake Fluid Dot 3 | Hydraulic Brake Fluid Dot 4 |
Colour | Red | Red |
Kinematic Viscosity at 100°C., cSt, | 2.2 | 2.2 |
Kinematic Viscosity at (-) 40°C., cSt, | 1500 | 1300 |
Equilibrium Reflux Boiling Point, °C. Max. | 205 | 240 |
Generator Set Oil / Genset Oil 40 is blended from highly refined base stocks with high viscosity index and additives that impart detergent, dispersant, anti-oxidant and anti-wear properties. Besides lowering the maintenance cost, generator set oil / genset oil 40 enhances the engine life with less wear and tear and controlling sludge / varnish.
Generator Set Oil / Genset Oil 40 are recommended for use as crankcase oils for slow, medium and high speed stationary diesel engines, e.g. Generator Set Oil etc.
Generator Set Oil / Genset Oil 40 meets the performance level of API CD, IS: 13656-2002, EDL-2, SAE 40
CHARACTERISTICS | Generator Set Oil / Genset Oil 40 |
Kinematic Viscosity at 100°C., cSt, | 14.0 – 15.0 |
Flash Point, COC,°C, Min. | 220 |
TBN, mg KOH / gm. | 10.0 |
Pour Point, °C Max. | (-) 6 |
Radiator Coolant is a premium quality synthetic radiator coolant which is free from amines, borates, silicates and phosphates. Radiator Coolant is easily miscible with water and possesses excellent hard water stability. Radiator Coolant has good chemical stability and protects non-metallic components of engine radiator coolant, like gaskets and hoses. It exhibits high boiling point and low freezing point to take care of summer and winter.
Radiator Coolant is recommended for use in mobile and stationary automotive engines having closed loop radiator coolant circulation systems and advised to use one part of the concentrated fluid with two parts of water (preferably Demineralised Water) in the engine radiator coolant or as per the recommendation of OEM
Radiator Coolant oil mostly used and applicable in barrels in various maintenance work shops in garages area and in Fuel injection workshops or fuel injection industries and workshops across thousands of city shops in States of India
We have surplus capacity to produce lubricant and this extra capacity can be used to cater other parties to manufacture/filling their brand of product by way of toll blending.
Typical Properties Radiator Coolant | Radiator Coolant |
Colour | Bluish Green |
Boiling Point, °C. Min. | 155 |
Freezing Point of water solution, ºC. 50 % solution. | (-) 35 |
Freezing Point of water solution, ºC. 30 % solution. | (-) 15 |
Hydraulic Oil HLP are premium grade hydraulic oil having extra heavy duty anti-wear property with excellent thermal stability and high FZG rating. They have excellent compatibility with seals normally used in hydraulic system and unique hydrolytic stability.
Hydraulic Oil HLP are recommended for high performance electro-hydraulic or numerically systems. Hydraulic Oil HLP are also used as screw compressor oils.
IS:10522:1983 [Reaffirmed November, 1998] DIN 51524 Part II
Hydraulic Oil is mostly used in as Hydraulic oils, excavators, heavy earth moving equipments, hydraulic systems, screw compressor, vacuum pumps, mining machinery, machine tools, injection moulding machines, hydraulic device, circulating oil systems, chain drives, cranes, hydraulic couplings elevators, hydro extractors, lifts, sheet metal pressing industry, plastic industry for mould making, power press, pneumatic press, transmission equipment, hydraulic lifts, earth moving equipment, etc.
Manufacturers, Exporters and Suppliers of Hydraulic Oil (RO Type), Hydraulic Oil HVI, Hydraulic Oil HLP, Hydraulic Oil Antiwear from INDIA.
Types of Hydraulic oil: anti-oxidant oil, anti-corrosion oil, anti-wear oil, anti-rust oil, anti-foam additives, rust and oxidation inhibitors (RO).
CHARACTERISTICS | Hydraulic Oil HLP | ||||
32 | 46 | 68 | 100 | 150 | |
KV at 40°C | 30 – 34 | 44 – 48 | 66 – 70 | 95 – 105 | 145- 155 |
VI, Min. | 95 | 95 | 95 | 95 | 95 |
Flash Point, COC, °C. Min | 190 | 210 | 210 | 220 | 220 |
Pour Point, °C. Max. | -6 | -6 | -6 | -6 | -6 |
Hydraulic Oil HVI are premium grade high viscosity index hydraulic oils which have excellent shear stability and can withstand wide range of temperatures. Hydraulic Oil contain special additive package that reduces wear, rust, oxidation, etc, and imparts good hydrolytic stability and water separation characteristics. Good anti-foam and air release properties ensure smooth operation and system efficiency. They have excellent compatibility with seals normally used in hydraulic systems.
Hydraulic Oil HVI are mainly recommended for hydraulic excavators of Tata-Hitachi, L & T, Komatsu, etc. and can also be used for suitable industrial applications.
DIN 51524 Part 3
Hydraulic Oil is mostly used in as Hydraulic oils, excavators, heavy earth moving equipments, hydraulic systems, screw compressor, vacuum pumps, mining machinery, machine tools, injection moulding machines, hydraulic device, circulating oil systems, chain drives, cranes, hydraulic couplings elevators, hydro extractors, lifts, sheet metal pressing industry, plastic industry for mould making, power press, pneumatic press, transmission equipment, hydraulic lifts, earth moving equipment, etc.
Manufacturers, Exporters and Suppliers of Hydraulic Oil (RO Type), Hydraulic Oil HVI, Hydraulic Oil HLP, Hydraulic Oil Antiwear from INDIA.
Types of Hydraulic oil: anti-oxidant oil, anti-corrosion oil, anti-wear oil, anti-rust oil, anti-foam additives, rust and oxidation inhibitors (RO).
CHARACTERISTICS | Hydraulic Oil HVI | |||
32 | 46 | 68 | 100 | |
KV at 40°C | 30 – 34 | 44 – 48 | 66 – 70 | 95 – 105 |
VI, Min. | 150 | 150 | 135 | 130 |
Flash Point, COC, °C. Min | 160 | 160 | 160 | 190 |
Pour Point, °C. Max. | -39 | -39 | -33 | -27 |
Compressor Oil are blended from refined based stocks with Antioxidant and Rust Inhibitor to provide satisfactory lubrication under high temperature and high load conditions.
Compressor Oil recommended for cylinder lubrication of reciprocating compressors and rotary air compressor operating up to 220C air discharge temperature.
Meet requirements of cylinder lubricants in reciprocating and rotary air compressors.
Compressor Oil / oils is mostly used in as compressor oil, Lube additives, for cylinder lubrication, rotary air compressor oil, Antioxidant compressor oil, Rust Inhibitor compressor oil.
CHARACTERISTICS | Compressor Oil | ||||||
32 | 46 | 68 | 100 | 150 | 220 | 320 | |
Kinematic Viscosity @ 40°C, cSt. | 30 to 34 | 44 to 48 | 66 to 70 | 95 to 105 | 145 to 155 | 210 to 230 | 310 to 330 |
Viscosity Index, Min. | 95 | 95 | 95 | 95 | 95 | 95 | 95 |
Flash Point °C (COC), | 190 | 190 | 200 | 200 | 210 | 220 | 220 |
Pour Point, °C. Max. | -6 | -6 | -6 | -6 | -6 | -6 | -6 |
Paraffin Wax / Oil is mostly found as a white, odorless, tasteless, waxy solid, with a typical melting point between about 47 C and 64 C ( 116.6F to 147.2F), and having a density of around 0.9 g/cm3.It is insoluble in water, but soluble in ether, benzene, and certain esters. Paraffin Wax / Oil is unaffected by most common chemical reagents, but burns readily. Pure Paraffin wax / Oil is an excellent electrical insulator, with an electrical resistivity of between 1013 and 1017 ohm metre.
In industrial applications, Paraffin Wax / Oil is often useful to modify the crystal properties of the paraffin wax / Oil, typically by adding branching to the existing carbon backbone chain. The modification is usually done with additives, such as Eva copolymers, microcrystalline wax, or forms of polyethylene. The branched properties result in a modified paraffin with a higher viscosity, smaller crystalline structure, and modified functional properties.
For consistently meeting the needs of our precious clients, we have become a reputed manufacturer and supplier by offering optimum qualityLight Liquid Paraffin.The offered paraffin is processed under the stern observation of our professionals using sophisticated processing techniques. Also, itis highly purified mixture of liquid saturated hydrocarbons obtained from petroleum and is highly paraffinic in nature. Light Liquid Paraffin oil is transparent, & free from fluorescence in daylight. It is colourless, tasteless, and odourless when cold. Furthermore, our precious clients can avail the offeredLight Liquid Paraffinfrom us at industry leading prices.
Light Liquid Paraffin Oil Ip is used in the manufacture of Anti-static Coning oil, Knitting oil & other Textile Auxiliaries, Plant Spray Oil, Agrochemicals, Aerosols, Dye Intermediates, Paper Industry; Perfumery, Food Grade Speciality Lubricants, Food Grade Plastics used as a Lubricant Plasticizer, Attars, Flavours & Fragrances, Perfumery Chemicals, Speciality Chemicals, Incenses, Personal Care Products, Leather Chemicals, Fat Liquors, Petrochemical Solvents, etc. It may also be used in the manufacture of Pharmaceuticals and Cosmetic Products like Creams, Lotions, Perfumery Industry, Bulk Drugs & Food Industry etc.
Metal Drawing Oil 15 is manufactured from highly refined base stocks and specially selected additives to impart high wetting and excellent EP properties with good metal deactivation, anti-rust and anti-wear properties. This product has excellent load carrying ability which is encountered in metal drawing and is capable of stopping any wire leakage even with high speed drawing.
Metal Drawing Oil 15 is suitable for metal wire drawing operation of ferrous and other alloys of ferrous even with high speed.
CHARACTERISTICS | Metal Drawing Oil 15 | |||
300 | ||||
Kinematic Viscosity at 40°C, cSt | ||||
Flash Point,°C, COC, Min. | 250 | |||
Copper Strip Corrosion for 3 Hrs at 100°C. | 1 | |||
Saponification No., mg KOH / gm. | 20 |