Other Products / Services #270575

This instrument is a portable 3 digit, compact sized Digital Thermometer designed to use external K-type thermocouple as temperaturesensor. Temperature indication follows National Bureau of Standards and IEC 584 temperature / voltage tables for K type thermocouple.RTD Thermometer is mainly using for monitoring high-precision temperature and measuring scopes. The thermometer can displaychanges among the three units : Kelvin, Fahrenheit and Centigrade, and it also has memory, reading the MAX and MIN values function.

Weoffer Dynemech Make ANTI VIBRATION SHEETS made from high grade synthetic composite material. These sheets have different load capacities and are available in different natural frequencies to suit various industrial applications. These are resistant to water, oils, lubricating oils, fuels etc. used in the shop floor. Each sheet has defined stress value and can be placed directly under the machine as per the weight of the machine and no. of mounting positions. These plates will not deform plastically, if the weight of machine does not exceed maximum load value of the insulation plates. The available thicknesses are 2mm, 8mm, 15mm, 20mm, 25mm and 65mm.

We supply the Dynemech Wedge Mounts are designed for industrial machinery that require precision levelling and vibration absorption. This three piece wedgemount has an adjustable bolt which moves the centre wedge between the top & bottom wedges. The movement of the center wedge provides precision height adjustment which can be used for machine leveling. Large supporting surface ensures solidity and rigidity.

All Wedge Mounts have a specialized elastomeric insulation plate at the bottom which provides vibration damping capabilities. These insulation plates are customized for damping different frequencies. All our Anti Vibration mounts have different vibration damping materials for precise machine vibration control. Different models of Anti Vibration Wedge Mounts are available depending on whether the machine needs to be:

Freely placed on the mounts (Series DF), Bolted to the mounts (Series DB), Bolted to the mounts and grouted to the floor (Series DT), Transmit load of the machine to the floor at 90 with very precise leveling (Series DTSP), Requires very high height adjustment range (Series DTH), A large centered hole instead of two eccentric hole with offset adjustable bolt to accommodate a bigger size bolt (Series DTO)

Vibration reduction is possible through assembling respective Dynemech insulation plates. These Anti Vibration mounts are suitable for heavy CNC machines and Power Presses as these mounts can take large loads and provide levelling adjustment. The Anti Vibration mounts have large surface area for maximum coverage under machine body and provide maximum support to machine during levelling.

We are offering material handling equipments like hydraulic pallet truck, stacker, forklift, floorcrane, industrial lift, tow truck etc.

we supply all type of plastic polymer. our products are good qulity.

We are the leading manufacturers, exporters and supplier of this products.

We are offering SS Barell Pump available in ss 304& SS 316 quality with certificate of MOC. RequestCallback Other Details:Item Code: SRE-529

We are offering finest variety of pvc curtain. Imported and indian quality of curtain is available in following size.Size of pvc curtain: 200 mm w, 300mm w, 1350mm wthickness: 1mm, 2mm, 3mm, and 5 mm

We are the leading exporter and supplier of this products.

SRE-503 DRUM HANDLERCapacity: To Lift, Shift, Tilt, rolls & Emptying purpose Std. 205 Ltrs. M.S. Drum.Discharge Height: 16 Inch. Approx.Structure: Will make from Various Dia. M.S. Pipe & M.S. Flat.Wheel: 2 Nos. 10 X 2 Size & 2 nos. 6 X 2 Size H.D.P.E. Wheels with bearings. 4 Nos. Wheels for, rotating purpose of M.S.Drum.

For killing of insects we are presenting a finest and most trusted solution. Insect Killer is one of the widely demanded machines that is widely used for killing all types of insects like mosquitoes, bees, and more. Some insects are really dangerous and can adversely affect your health so they should be killed and for that Insect Killer offered by us is best solution. Available in both Wall mounted as well as ceiling mounting.Technical Details :MODEL: NINJA 4 X 20 [ SS MS ]TUBES: FOUR OF 24 20 WattsTYPES: CEILING WALL MOUNTINGPOWER: 230 VOLTSDIMENTIONS : 625mm[H] X 220mm[W] X 600mm [L] MODEL NINJA 2 X 20 [ SS MS ]TUBES TWO TUBES 24 20 WattsTYPES CEILING WALL MOUNTINGPOWER 230 VOLTSDIMENTIONS: 625mm[L] X 170mm[W] X 410[H]mm MODEL TRANGULARTUBES: SINGLE TUBE OF 18 30 WATTSTYPES: WALL MOUNTED WITH GLUE BOARDPOWER: 230 VOLTSDIAMENTIONS: 525mm[L] X 215mm [H] X 170mm [W] MODELTUBES: TWOFOUR TUBES OF 15 WattsTYPES: WALL MOUNTED WALL MOUNTEDPOWER: 230 VOLTSDIMENTIONS : 505mm[L] X 125mm[H] X 320mm [W]

We are offering Series DT:Dynemech Wedge Mounts, Series DT is designed for machines which are top heavy or have eccentric motion or machines which must be anchored top the ground. Wedge Mounts, Series DTPPlaced at a height of 100-150 mm to facilitate cleaning and repairing, as per IMTMA guidelines. It in turn helps in enhanced machine tool reliability. There would not be breakdowns, and there would be reduced operation and life cycle costs which are driving factors for adoption of Total Productive Maintenance (TPM) practices recommended by IMTMA. Range of Applications: Drilling and Milling machines, Machining centres, Special machines, long lathes, long planers, Power Presses etc.RequestCallback

DYNEMECH MACHINERY RAISER DAMPING BLOCKS offer easy and quick installation of CNC machines. These blocks offer both levelling and vibration damping besides raising height of the machine for proper cleaning and repairing under it. Raiser Damping Blocks are assembled with insulation plates for vibration reduction. They provide fast and easy installation, flexible shop floor plan, enhanced component finish/part tolerance, extended tool and machinery life, improved health protection, better structural safety. Ideal for CNC Turning/Machining Centres, Cylindrical & Centreless Grinding Machines, Precision Machine Tools. Help implement TQM norms for machine installation. Proper maintenance, cleanliness, vibration reduction results in enhanced machine tool reliability (zero breakdowns), reduced operation and life cycle costs which are the driving factors for adoption of Total Productive Maintenance (TPM) practices. Machines are installed at a height of 100-150 mm which help implement TPM norms for machine installation as recommended by IMTMA.

MACHINERY RAISER DAMPING BLOCKS, Series DRCSeries DRC are suitable for machines having plain hole in the base. Levelling is done by turning the bolt which lifts the cover plate along with the machine. Available both in 150 &100 mm height.

Distributor & Wholesaler of Hygiene Product & Automatic Hand Dryer. Our product range also comprises of Plastic Crates, Bins & Pallets, Expanded PTFE Sheets and Indef Chain pulley block

We are offering PTFE Coated Fiberglass Cloth are made from woven fiberglass cloth that has been coated with PTFE resin. This coating, combined with the excellent strength and dimensional stability of the fiberglass and the easy release and heat resistance of PTFE, results in a product appropriate for use in a wide variety of demanding applications. This premium fabric has a heavier coating of PTFE compared with the standard.AdvantagesExcellent adhesive resistant and release characteristicsHeat resistant- operational temp from 87F (-60C) to +522F (+260C)Chemical resistantMechanical propertyUnique fine electric insulation propertyLong lasting life etc.Applications IndustryRelease sheetsseparation materialsHeat transfer pressesFood dehydrationComposite mold releaseRelease sheets for fabricating glass resin structuresPolymer processing ApplicationsFabric for curtains for shrink-wrapping machine to reduce heat loss from both ends, Release fabric for curing of abrasive wheel discs, Protective curtains in process plants, Release sheets used in laminating printed circuit board

We are offering Wheel Waste Bin120 LT & 240 LTAlso Available With Pedal Wheel Waste Bin120 LT Wheel Waste Bin240 LT Wheel Waste Bin660 LT Wheel Waste Bin1100 LT

pallet trucks are the efficient and simple mode of transporting palletized loads on the shop floor. Available in both manual and electric operated versions, pallet trucks come in different variants to suit desired applications. Maini's floor transportation range enables effortless transfer of heavy loads in your shop floors and warehouses. This range includes the quintessential electric pallet trucks and electric platform trucks, designed to enhance productivity, ensure safety and optimize returns. Streamlined design and small turning radius make it ideal for operating in narrow passageways. Ease of maintenance makes it your best choice for the long run.

This Drum Lifter is composed of hydraulic system, main body, Drum holding device and tilter. The Frame work is welded of high quality swage. This Drum Lifter lifts drum with manual hydraulic jack and hauls loads by hand. The hydraulic gear is equipped with return valve and foot pedal to control drum carriage lowering rate and ensure the hydraulic action accurate and reliable. To Pull or push the Drum Lifter manually to place the Drum to required place. When need rotating the Drum brake the rear wheels to avoid moving Lifter. Keep on lifting to required height, turn the handle so that Drum can rotate. You have our assurance of the best technical expertise with meticulous attention to all aspects of product quality to your satisfaction. Our Hydraulic units are leakproof +with special wear resistant seals. The ram & Plunger are ground & HARD CHROME plated to avoid friction & rusting particularly while working out doors.

Drum Handler: Capacity: To Lift, Shift, Tilt, rolls & Emptying purpose Std. 210Ltrs. M.S. Drum.Discharge Height: 16 Inch. Approx.Structure: Will made from Various Dia. M.S. Pipe & M.S. Flat.Wheel: 2 Nos. 10 X 2 Size & 2 nos. 6 X 2 SizeWheels with doubel ball bearings. 4 Nos. Wheels for, rotating purpose ofM.S.Drum.

SRE-504 Hydraulic Hand Lift Drum-LiftCum - Tilter Cum - ShifterCapacity 350 Kgs.Lifting Height 1425 mm.Overall Length 1190 mm.Overall Width 890 mm.Overall Height 2020 mm.Net Weight 155 Kg.

SRE-508 Hydraulic Drum CarrierLifting Capacity Kg 250Lifting Height mm 280Max. Drum Diameter mm 572Max. Drum Length mm 915Length mm 845Width mm 800Height mm 1105Packing Dimension mm 860 x 760 x 340Net Weight Kg 4042SRE-508 is an ultimate easy & safe Drum Carrier with Hydraulic System to lift & Transport the MSPlastic Drums by a single person from one place to another in big godowns, production areas etc.Two big size rear wheels are provided with two bearings each & one front wheel swiveling type is also with double ball bearings for smooth running. All Three wheels are PU Coated to avoid any damage to floors & rattling noise. No maintenance is required in this type of drum carrier.

Sre-509 ss barrel pump drummanualy type for 200ltrs drum.rotary action non-sparking flameproof hand operated drum pumps.barrel pumps made exclusively from teflon and stainless steel 316 materials.stainless steel 316 1" inlet & outlet tube with 2 bung adapter.self-priming barrel pump quickly & easily dispenses corrosive liquidschemicals from drums.

SRE-511 DOC-SACK CARTWheels : 2 Nos. 10 X2 size Heavy UHMW-PE Unbreakable double ball Bearing

SRE-511(A) DOC-SACK CARTWheels : 2 Nos. 10 X2 size Heavy UHMW-PE Unbreakable double ball Bearing

SRE-511 (B) DOC-SACK CARTWheels : 2 Nos. 10 X2 size Heavy UHMW-PE Unbreakable double ball Bearing

Wire mesh is primarily used as industrial filters in the application of filters, strainers, baskets, sieves and separator. Wire meshes are available in the below materials.

Wire meshes Material

Wire Mesh are readily available in the form of rolls, cut piece, round discs and can also be customized as per requirement. Plain weave, Twilled weave, Plain Dutch Weave & Twilled Dutch Weave are the different types of weave.

Made from High Impact Polystyrene, these drawercontainers are ideal for storing hardware andstandard parts inside drawers of tool cabinets

These drawer containers are available in 6 sizes.

These drawer containers when positioned, inside the standard tool cabinet drawers make easy and well defined compartments for each type of part stored in them.

These drawer containers being modular help in organizing the drawers of tool cabinets to store different parts very easy.

Each Container has a label holder which permit the insertion of labels for easy part identification.

These containers are individually removable if required in the drawer.

These containers are available in blue colour only.

TPM Series Mounts have a height of 100mm/150 mm (as per client requirement) at mean position to help proper cleaning and repairing under the machine as per TPM guidelines for machine installation by IMTMA.

All TPM Series Mounts have a specialized Anti-vibration elastomeric insulation plate at the bottom which provides vibration reduction. Different models of TPM Series Mounts are available depending on machine to be installed.

Wedge Mounts Free Standing and levelling adjustment is available (Series DFP), Wedge Mounts Bolted to Machine and levelling adjustment is available (Series DBP), Wedge Mounts Bolted to Machine and anchored to ground with levelling adjustment (Series DTP), Circular Mounts suitable for machines having plain hole in the base and requiring levelling adjustment (Series DRC), Circular Mounts for machines having tapped hole in the base with bolt resting on the top face of our mount (Series DR).

The Stairway tower is the ideal for safe and ergonomically working at height. Thanks for the specially designed stairways it is an easily accessible tower and very user friendly when working with tools or other equipment

This scaffold is the most useful ascending aid for activities involving frequent ascend/ descend and transport of loads. Stairway rails add to the all round safety. No tools required, Spacing of platforms every 2 meters (Optional) ease is assembling or dismantling of the tower. Ribbed rung tubing for increased grip.

STABILIZERS

Four stabilizers are further connected to the unit: spring loaded clamp assembly connects them to the H frames to give a better stability required forthe structure.

WHEELS

The wheel and brake unit consists of adjustable nut placed on thrust bearing to take axial thrust. The wheel has been fitted with radial bearing. When the mounting surface is uneven the adjustable nut is used forthe alignment. The lever is provided to release or apply brakes.

PLATFORMS

The Aluminium platform is made up of rectangular sections framed and welded to the checkered plate with ends consisting of claws. The platform could be placed on the frames depending on working height as per requirement.

WeOffers a single-width folding tower which is particularly suited to work indoors. It has base measured of 750mmx1800mm

Wealso offers a double-width folding tower which is suited to work indoor and outdoor. It as base measurement of with 1400mm and legth of 1800mm, 2000mm and 2500mm

In addition to all the advantages offered by the scaffolds, the folding scafforld with extension frame assembly provides even more advantages in use and in safe ascent/descent and access. The extension assembly is quick and easy to install. working 3.80m.

We supply a supreme qualityRubber Expansion Joints. The offered rubber expansion joint are designed using quality assured of material.

Features:

• Anti corrosive
• Easy to install
• Sturdy construction

Applications:

• Process piping in paper and pulp, chemical, primary metal and petroleum refining plants
• Sewage disposal and water treatment plants
• Central and ancillary power generating stations in communities, factories, buildings and aboard ships
• Air conditioning, heating and ventilating systems in commercial and institutional buildings, schools, apartments, stores, hospitals, motels, hotels and aboard ships

Strong ribs provided for optional dividers to increase storage options.

Full length rear lip supports provided for hanging bins on louvre panels or rails.

Reinforced ribs adds strength and avoids spreading.

Extra wide stacking base for secure stacking.

Extra wide label slot for easy content identification.

Stopper prevents stacked bins from shifting forward.

S.S. Conveyor Material: SS-304 / SS-316 WireDiameter: as per your requirement No. Of Dips: as per your requirement Width: as per your requirement Length: as per your requirement

We provides vibration damping solutions along with industrial machine tools, anti vibration mountings and burnishing tools.

High Pressure Regulators are specially designed for use in systems where a high delivery pressure is required. High Pressure Regulator reduces and regulates the available source pressure until its nearest available source pressure.High Pressure Regulators are available in many different combinations of materials and thread connections to suit to individual industry requirements.

High Flow & High Pressure Regulators are specially designed to deliver a very high flow rate of gas with a high pressure. High Flow & High Pressure Regulators are available in different combinations of thread connections to suit to individual industry requirements. Instead a diaphragm, The Regulator works on a Piston.

Applications:

• Fire fighting applications viz. into a DCP truck where nitrogen gas is used to boost the water delivery to reach to a greater distance with a greater force.
• Gas streams where multiple delivery stations to be monitored with a common pressure control systems.