Gaskets #270575

We Supply Inflatable (Gaskets) seals, which are made from high strength FDA Approved Transparent Silicon Rubber and comply to class 21 CRF 177.2600.

Inflator seals provide on inflatable sealing solution, where the risk of fabric contamination is not acceptable.

• Oven Door Seals
• Fluid Bed Dryer
• Sterilizer
• Fluid Bed Dryer /Processor/ Equipment

Inflator seals are supplying in a relaxed / deflated position like cycle tubes. When air pressure is applied, the seal either expands or raisedup to meet the sealing face. When the pressure is released, the seal returns to its relaxed position. All seals are supplied with a one way inflation assembly.

• It provides a Leak Proof closure, yet allows clearance when needed.
• It simplifies the design of the structure & hardware.
• It minimizes the need of close matching and fabricating tolerance.
• It is not subject to compression set which negates effectiveness of other seals.
• Western inflatble seal has very good inflation and deflation property on joint & nozzle.
• Size of the seal is very accurate with tolerance of 5% & can withstand 4 kgcm2 pressure.
• Western inflatable seals is uniform, so there is very less chance of bursting at recommended pressure.
• Leak proof property at joint & nozzle

Spiral wound gaskets have proven to be the most reliable sealing element for use in difficult, critical and hazardous duties. These help in avoiding leakage from pipes, which work under high temperature.

Customers can avail these in different shapes and sizes with different filler material.

Spiral wound gaskets are used in Refinery, Petrochemical, Chemical, Steam lines and Process Industries, where they have many advantages over older types of gaskets. We Supply Spiral Wound Gaskets with different filler like Graphite/Asbestos/PTFE/CAF etc. Also, we can provide different winding material.

Features:

• Longer Life
• Rust Proof
• Sturdy material
• Wear and tear resistance
• Durability
• Easy installation

Application:

• Refinery
• Petrochemical Industries
• Chemical Industries
• Heavy Machinery Industry

Novapress BASIC combines performance and cost effectiveness for a wide range of different applications, from machine manufacturing to shipbuilding and from gas / water supply to the food industry

Frenzelit non-asbestos gasket sheeting as well pre-cut gaskets are readily available

Pure Silicon Food Grade TC Gaskets

• From to 12
• With collar and Without collar
• In transparent silicone rubber
• In White & Red colour
• In Viton, EPDM, Nitrile & Neoprene Rubber
• Triclover Gaskets available with metal clamp .

isoplan insulation materials for exacting requirements isoplan is used as insulation board in temperatures ranging up to 1, 100 C (1) and as gaskets for inert gases up to an internal pressure level of 500 mbar. isoplan products are based on special, biosoluble mineral fibers and/or biosoluble high-temperature Alkaline Earth Silicate (AES) wools. In combination with appropriate filling and bonding agents, they guarantee resistance to consistently high temperatures. Thermal conductivity the key criterion Alongside high temperature resistance, thermal conductivity is the crucial criterion for the assessment of an insulation material. It indicates how much heat flows through a material between the surfaces. The lower the level, the higher the insulation capacity of the material. In insulation material applications, surface pressure levels of 10 N/mm2 should not be exceeded. Contact us if you have any questions about specification of how thick the insulation material needs to be.

isoplan processing advantages

isoplan has special advantages thanks to its easy and fast processability using standard cutting, sawing and punching equipment. The extremely flexible material combination means that thin isoplan can be adapted to existing geometries both dry and in a moistened state, even at thicknesses of up to 10 mm.

isoplan application advantages

The coordinated raw material blend and the defined process technology lead to extremely low thermal conductivity, with very good, consistent heat insulation properties. isoplan materials are also suitable for acoustic soundproofing. High application temperature limits and low thermal conductivity levels enable isoplan to be deployed as an insulation material in many different application areas. isoplan is used for low-pressure gaskets as well. The applications range in this context from maintenance, repair and upkeep to OEMs: steel industry, melting and pouring equipment, industrial furnaces and boiler manufacturing, chimney flaps, fire protection doors, heating and drying equipment, machine and equipment manufacturing, electrical equipment and the glass industry

isoplan 500 GREENLINE

Application temperature limit: 1, 050 C The problem solver in the isoplan product family with very low emission when heated for the first time (low emission) and with minimised strength loss in the 300 500C range. Material combination: biosoluble mineral fibre and active functional filling agents.

isoplan 750 GREENLINE

Application temperature limit: 750 C Environmentally sound standard insulation material. Material combination: biosoluble mineral fiber and filling agents

isoplan 1000 GREENLINE

Application temperature limit: 1, 000 C Environmentally sound insulation at high temperatures. Material combination: biosoluble mineral fiber and temperature-resistant filling agents

isoplan 1100 GREENLINE

Application temperature limit: 1, 100 C Environmentally sound insulation at very high temperatures. Material combination: biosoluble high-temperature AES-Wool and filling agents that withstand high temperatures.

Frenzelit non-asbestos gasket sheeting as well pre-cut gaskets are readily available

Novatec PREMIUM XP is the new and more efficient Extended Performance (XP) generation of graphite gaskets reinforcedwith aramid fibres that have been developed by Frenzelit. A considerable reduction in leakage and at the same time, excellentresidual stress and chemical resistance levels are achieved thanks to careful graphite structural design and ingenious processengineering. With novatec PREMIUM XP it is possible to configure gasket systems in accordance with DIN EN 1591-1 with thesealing category L0.01 as outlined in VDI 2290. In this context, the unique combination of aramid fibres and graphite makesit possible to standardise gaskets far beyond the existing options with elastomer-bonded fibre gaskets for a wide range ofdifferent applications up to a maximum of 300C.

Frenzelit non-asbestos gasket sheeting as well pre-cut gaskets are readily available