Product / Services
Post Buy Requirement
AI
Adinath International
Rajsamand, Rajasthan, India
Add Review
Call 08068051396 Ext. 106

Our Products

  1. Filling Line 20 Products available
  2. Liquid Filling Machinery 3 Products available
  3. Textile Machinery 5 Products available
  4. Labeling Machine 4 Products available
  5. Pharma Equipment & Machines 3 Products available
  6. Pharmaceutical Machines 6 Products available
  7. Filling Machines & Plants 3 Products available
  8. Others 29 Products available

Filling Machines & Plants #4232943

Rotary Bottle Washing Machine

Rotary Bottle Washing Machine
Adinath offer superior quality Rotary Bottle Washing Machines, which are based on Geneva mechanism. This Rotary Bottle Washing Machine is available in sturdy and accurate configuration and offer superior functionality in the pharmaceutical industries. Our bottle washing machines are offered in safe packaging to avoid any damage during the transportation. Apart from the pharmaceuticals, this machine uses in Food, Chemical, Cosmetic & Beverage industry for washing glass bottles.
Features
The specially designed cups are provided on the platform to accommodate any size of Bottle from 100 ml to 500 ml.
Easy loading and unloading with two rows.
Individual solenoid valve for each washing sequence.
Pumps and tanks are mounted on parable stand for easy maintenance.
Compact GMP model.
Geneva mechanism.
Four internal, one external and one air wash.
Washing Sequences and positioning of washing stations can be interchanged as required for liquid oral & injectable.
Stationary nozzles eliminate contamination of water cycles.

Technical Specification
Model ARBW-64 ARBW-100
Production Rate 40 to 60 Bottles/Minute 60 to 100 Bottles/Minute
Direction of movement Clockwise Clockwise
Input Specification: - -
Round Shape - -
Diameter 30mm to 100mm 30mm to 80mm
Height 50mm to 270mm 50mm to 270mm
Square Shape - -
Length 30mm to 100mm 30mm to 80mm
Width 10mm to 50mm 10mm to 50mm
Height 58mm to 190mm 58mm to 190mm
Power Specification: = -
Main Motor 0.5 H.P. 0.5 H.P.
Pumps 1 H.P. x 2 = 2 H.P. 1 H.P. x 2 = 2 H.P.
Electric Heater 3 K.W. 3 K.W.
Electrical Characteristics: 440 Volts, 3 Phase, 50 Hertz, 4 Wire System 440 Volts, 3 Phase, 50 Hertz, 4 Wire System
Air Pressure Required: 6 bar@5 CFM 6 bar@5 CFM
Tank Capacity: 75 Liters, SS 304 (2 Nos.) 75 Liters, SS 304 (2 Nos.)
Water Cycle: 4 Inner + 1 Outer 4 Inner + 1 Outer
Working Height: 850mm to 900mm 850mm to 900mm
Change Parts: (A) Neck Diameter: Bottle holding pocket. (A) Neck Diameter: Bottle holding pocket.
- (B) Flat Container: Special type of cup. (B) Flat Container: Special type of cup.
Overall Dimension: 1500mm (L) x 1750mm (W) x 1300mm (H) 1500mm (L) x 1750mm (W) x 1300mm (H)
View Complete Details
Ask Latest Price & Details
Automatic Linear Bottle Washing Machine

Automatic Linear Bottle Washing Machine
  • 1st wash Recycled Water
  •   2nd wash
  • Purified Air  
  • 3rd wash DM water
  •   4th wash
  • DM water  
  • 5th wash Purified Air
  •   6th wash
Automatic Linear Bottle Washing Machine is suitable to wash glass bottles. Machine equipped with six washing stations can be interchangeable as per specific customers requirements. This Linear Bottle Washer provides 3 water wash & 3 air wash for positive & pressurizing washes of bottles. All contact parts made from stainless steel 316 and non-contact parts made from stainless steel 304 materials. Bottle invert into neck down position and nozzles enters into bottle during washing cycle to meet GMP requirements. Automatic Linear Bottle Washing Machine is ideal and economic choice for online Sterile Vial Filling Line. Machine is having uses in Pharmaceutical, Cosmetic, Food, Chemical & allied industries.
Salient Features
A complete cGMP model
All contact parts are made from high quality Stainless Steel 316L and argon arc welded
All exposed parts are made from Stainless Steel 304/hard chrome plated/brass for corrosion free long life.
The unit built on S.S. Square pipe frame and totally encompassed with S.S. Coverings
Washing section is totally covered with acrylic cabinet.
No Container - No Washing system.
No washing - No water supply system.
Quick change over with minimum use of tools.
Variable AC frequency drive for speed adjustment.
Low water consumption.
Digital counter for counting production output.
Fixed top nozzles at each washing station ensures external washing of vials/bottles at the same time of internal washing.
Flow of washing Medias stop during the indexing of chain saves utilities.

Easily cleanable & Inter changing facility.

Containers feed from the de-cartooning station are received on an In feed turn table. An in feed worm inverts container to neck down position and feeds them through a specially designed indexing device. The device carries the container forward and stops. Nozzles carrier enters into the container and activities the jet of water/air. The air/water flow is deactivated after the washing cycle is over. Device indexes the vials/bottles for next wash. A separate pumping station gives the right quantum of water at the desired pressure. Washed containers are again inverted to neck upward position to collect in out-feed tray/directly feed to tunnel.

Technical Specification
Model ALBW-50 ALBW-100
Production Rate 30 to 50 Containers/Minute 50 to 100 Containers/Minute
Input Specification (Container Diameter) 25mm to 70mm 25mm to 70mm
Power Specification - -
Main Machine 0.75 H.P. 1.50 H.P.
Pumping Station 2.25 H.P. 2.25 H.P.
Loading Platform 0.25 H.P. 0.25 H.P.
Electrical Characteristics 440 Volts, 3 Phase, 50 Hertz, 4 Wire System 440 Volts, 3 Phase, 50 Hertz, 4 Wire System
Optional Accessories: Pumping Station Pumping Station
- Inspection Station Inspection Station
- Loading Platform Loading Platform
- Programmable Logic Control with GUI Programmable Logic Control with GUI
Input Utilities: - -
Fresh Water 5 Liters / Minute 10 Liters / Minute
DM water 10 Liters / Minute 20 Liters / Minute
WFI water 5 Liters / Minute 10 Liters / Minute
Air 30 CFM@5 Bar 30 CFM@5 Bar
Change Parts Infeed Worm, Infeed Star wheel Infeed Worm, Infeed Star wheel
- Infeed Inverter, Exit Feed Worm Infeed Inverter, Exit Feed Worm
- Exit Star wheel, Exit Inverter Exit Star wheel, Exit Inverter
Overall Dimension: 2300mm x 850mm x 915mm 2300mm x 1000mm x 915mm
View Complete Details
Ask Latest Price & Details
Tube Filling, Crimping and Batch Coding Machine

Tube Filling, Crimping And Batch Coding Machine
  • Model ATFM-60
  • Production Output 20 to 60 tubes / minute
  • Filling Volume 5 ml to 100 ml
  • Input Specification -
  • Tube Size Diameter: 12mm to 25mm
  • Tube Size Length: 50mm to 200mm
  • Power Specification 3 H.P.
  • Electrical Characteristics 440 volts, 3 Phase, 50 Hertz
  • Overall Dimension 1450mm (L) x 1150mm (W) x 1750 (H)
Salient Features
No Tube - No Filling" system.
Suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device.
Electrical jacketed S. S. Hopper with thermostatic control to keep the material hot, while filling for a smooth flow of material.
Machine is provided with stirring device, so that no active ingredients in the material can stick to the inner wall of hopper.
All contact parts made of S. S. 16 material.
Relay electrical control system with operating panel with start, stop, and inch.
Variable A.C. drive motor for the speed adjustment.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Sagar Maru (Adinath International)
  • National Highway No.8, Bus Stand Pasoond, Rajsamand, Rajasthan - 313324, India
  • Share us via
    Linkedin pinterest
  • Call 08068051396 Ext. 106