Kitchenware And Cookware

We offer the best product range of Pharmaceutical Powder Mixer and Multi Mill.

Pharmaceutical Powder Mixer

Pharmaceutical Powder Mixer is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

Features


	The conical shape at both ends enables uniform mixing and easy discharge.

	All contact parts are made out of Stainless Steel 304 or 316 quality material as required by customer.

	Maximum care has been taken to ensure safe operation of the unit.

	Manual rotating facility with hand wheel for inching. The same will be provided with Stainless Steel cover & limit switch. (In 200 Kgs. & above model)

	Two nos. of safety road will be provided at back side. ( One LH side & one RH side )

	Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.

	One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.

	Cone will be mirror polished from the inside & outside & structure will be matt polished.

	All moving parts covered with SS304 covers.

	Safety guards made from SS304 pipes provided in front of the m/c with limit switch.

	Panel fabricated from SS304 material with facility of three phase indication, D.O.L. starter, digital timer & Amp. Meter.

	As per customer requirement machine will be provided with left side drive or with right side drive.

	The conical shape at both ends enables uniform mixing and easy discharge.

	All contact parts are made out of SS304/316(as per customer requirement) quality material.

	Maximum care has been taken to ensure safe operation of the unit.

	Worm reduction gear use for speed reduction.

	Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.

	Inside & outside of the cone will be polished to the mirror finished.

	General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model.

	All safety guards & covers made out of SS304 in GMP Model.

	Hand wheel will be provided for manual tilting of cone.

	Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

Model No.	Gross Capacity In Litres	Working Capacity In Litres	Overall Dimensions (in mm) (L) x (W) x (H)	Discharge Height	Charge Opening	Power Supply
DCB-5	16 Ltrs	10 Ltrs	750 580 650	300	100	0.5 HP
DCB-10	35 Ltrs	20 Ltrs	1100 450 1200	300	100	0.5 HP
DCB-25	80 Ltrs	50 Ltrs	1200 600 300	450	150	1.0 HP
DCB-50	150 Ltrs	100 Ltrs	1400 800 1500	450	150	2.0 HP
DCB-100	300 Ltrs	200 Ltrs	1850 900 1900	450	200	2.0 HP
DCB-150	470 Ltrs	300 Ltrs	2000 1100 2000	450	200	5.0 HP
DCB-200	615 Ltrs	400 Ltrs	2100 1200 2100	450	200	6.0 HP
DCB-250	770 Ltrs	500 Ltrs	2200 1300 2200	450	200	7.5 HP
DCB-300	1000 Ltrs	600 Ltrs	2300 1400 2300	450	200	7.5 HP
DCB-400	1340 Ltrs	800 Ltrs	2350 1800 2350	600	250	7.5 HP
DCB-500	1500 Ltrs	1000 Ltrs	2400 1900 2400	800	250	10 HP
DCB-650	2000 Ltrs	1300 Ltrs	2800 2100 2700	800	250/400	10 HP
DCB-750	2500 Ltrs	1500 Ltrs	3000 2200 2600	800	250/400	10 HP
DCB-1000	3350 Ltrs	2000 Ltrs	3200 2300 3100	800	250/400	15 HP

View Complete Details

Ask Latest Price & Details

Multi Mill

Rotor Diameter
Specification Power Supply 3 H.P. Electrical Characteristics 440 Volts, 3 Phase, 1440 RPM D.O.L. starter provided with reversible switch. 89 mm ( approximate ) Rotor Diameter
Power Supply 3 H.P.
Electrical Characteristics 440 Volts, 3 Phase, 1440 RPM
D.O.L. starter provided with reversible switch. 89 mm ( approximate )
Rotor RPM 750 / 1400 / 2200 / 2800 ( approximate )
Screen Diameter 260 mm
Blades 12 nos. With Knife & Impact Edges & 02 nos. Scraper Blades
Out put 25 to 175 Kgs/Hour (Depending upon the products and the reduction required in sizes)
Charging/Discharging Height 1440/730mm approx.
Net Weight 275 kgs. approx.

Multi Mill is a self contained portable unit useful for high speed granulating, pulverising, mixing, shredding and chopping of wide range of wet and dry materials without special attachments.

As compared to the four common principles of size reduction i.e. grinding, compression, impact and shearing, which often do not produce controlled size reduction, this machine utilizes the principle of variable force swing hammer blades having both knife and impact edges rotating with a carefully selected screen to control size reduction.

Flow path of material in vertical rotor machine is streamlined. During comminution, material entering the chamber travels to the periphery and passes through the screen tangentially and radially, avoiding chocking and temperature rise.

Features


	GMP Model with all contact Parts made of Stainless Steel 316 quality material.

	All contact parts can be easily and quickly dismantled and cleaned.

	Castores provided for the ease of mobility.

	Sieves availble in sizes of 0.5 to 12 mm hole dia.

	12 nos. beaters with knife edges, impact edges & 02 nos. scrapper blades.

	AC Frequency Drive and Beltless drive & online granulation model available.

	Suitable for dry and wet granules.


Process Operation


Multi Mill is designed to utilize the principle of variable force swing beaters having both knife and impact edges rotating within a selected screen to control the particle reduction. Material fed in to the processing chamber moves to the periphery and passes through the screen radially and tangentially. Finally the processed material gets collected in to the container kept below the processing chamber.