Our Products
Indigenous make small eccentric presses specially designed for small pressing jobs such as stamping, marking, numbering, etc., ideally suitable for all small scale industries available in 3 . sizes Nos. 1, 2 and 3 represent small and big hand driven presses with vee drive arrangements :
No. | 1 | 2 | 3 |
Approx. tonnage pressure | 0.75 | 2 | 3 |
Stroke of ram | 1" | 1.1/4" | 1.1/8" |
Centre of back | 1.7/8" | 2.1/2" | 4.1/2" |
Front to back | 4" | 4.3/4" | 6" |
Base to guide | 3.3/16" | 3.3/4" | 5.3/4" |
Aoorox. net weiqht kqs. | 25 | 50 | 80 |
Ps. all of the above specifications are approx. and nearest to the actuals. Any other parmenters if required shall be available on demand. Specifications of custom-built deep draw presses are made and available on requirment.
Exhaustive job descriptions/detail are required to ascertain the particular model of deep draw press will be required for the purpose.
PRESS NO | 3 | 4 | 4S | 4. 1/2 | 4 1/2S | 5 | 5S | 5. 1/2S | 6 |
BED Size | 19.5" X 20" | 22" X 24" | 23" X 30" | 24" x 26" | 25" x 30" | 28" x 34" | 29" X 35" | 32" X 38" | 35" x 40" |
487.5 x 500 | 550 X 660 |
575 X 750 |
600 X 650 |
650 X 750 | 700 X 850 | 725 x 875 | 800 x 950 |
875 x 1000 | |
mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | |
PRESSURE IN TONS | 70 | 100 | 100 | 110 | 110 | 175 | ?00 | 220 | 250 |
CRANK | 4.5" | 5 5" | 6" | 6.5" | 7" | 8" | 9" | 10 " | 11" |
STROKE | 112.5 | 137.5 | 150 | 162.5 | 175 | 200 | 225 | 250 | 275 |
Mm | Mm | Mm | Mm | Mm | Mm | Mm | Mm | mm | |
HOLDER | 14"/12" | 16"/13" | 18"/15" | 18"/15" | 18"/15" | 20"/17" | 22"/18' | 24"/2O" | 28"/24" |
SIZE | 350/300 | 400/324 | 450/375 | 450/375 | 500/425 | 550/450 | 600/500 | 700 / 600 | |
mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | |
MAX | 14" | 16" | 18" | 20" | 20" | 24" | 26" | 28" | 32" |
CIRCLE | 355.6 | 406.4 | 457.2 | 508 | 508 | 609.6 | 660.4 | 711.2 | 812.8 |
mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | mm mm | |
CAP | 11" | 12" | 12" | 17 | 12" | 14 | 14" | 14 | 15" |
CLUTCH | 275 | 300 | 300 | 300 | 300 | 350 | 350 | 350 | 375 |
DIA | Mm | Mm | Mm | Mm | Mm | Mm | Mm | Mm | Mm |
HEIGHT | 7' | 7.5' | 8' | 8' | 8' | 9' | 9.5' | 11' | 11' |
WITHOUT | 2100 | 2250 | 2400 | 2400 | 2400 | 2700 | 2850 | 3300 | 3300 |
MOTOR | mm | mm | mm | mm | mm | mm | mm | mm | mm |
MOTOR 960 HPM | 7.5 H.P | 10 H.P | 15HP | 15 H.P | 15 H.P | 20 | 20 H.P | 25 H.P | 40 H.P |
These friction screw presses are preferred for hot forming (Forgings) and cold coining, stamping, embossing, sizing nonferrous metals. The press body is steel welded construction one piece box type design. After the welding the press body is glowed free from tension. The screw is made of high quality alloy steel and is heat treated to have great hardness at the same time great elasticity. Fly wheel screw presses machines of this type are characterized by the fact that fly wheel connected to accelerates at the start of working stroke, then braked to a standstill by the actual forming process. Thus the entire Kinetic energy stored in the fly wheel released screw press have not Kinetically fixed bottom dead center point in common with drop forging itself or by stops in the tool in turn, this results in advantage tool height adjustment is eliminated, forging accuracy is greater. Forging is possible in closed die, a screw cannot jam under load. Slipping clutch wheel overload protection pneumatic control can be provided.
POWER PRESSES-AMI-H Series (Steel Body)
Standard Accessories :
Shut Height at standard Max. Stroke is the distance between table surface & slide face with slide at bottom of stroke & adjustment up. | |||||||||||
PILLAR TYPE POWER PRESSES | |||||||||||
TWO POINT STEEL BODY, HIGH SPEED UNGEARED WITH PNEUMATIC CLUTCH ELECTRICALS AND ITS FITTINGS OR ROLLING KEY CLUTCH
|
Maximum Pressure | 10 Tons | 20 Tons |
30 Tons | 50 Tons |
75 Tons | 100 Tons | 150 Tons | 200 Tons |
250 Tons |
Stroke | 50 MM |
62 MM |
75 MM | 87 MM |
100 MM | 112 MM | 150 MM | 188 MM |
226 MM |
Length of Bed | 483 | 550 | 660 | 779 | 813 | 940 | 1016 | 1092 | 1168 |
Width of Bed | 330 | 362 | 406 | 508 | 546 | 686 | 737 | 788 | 839 |
Opening in Bed | 114 | 114 | 127 | 152 | 178 | 216 | 254 | 292 | 330 |
Bolster Plate Thiness | 64 | 65 | 76 | 76 | 89 | 102 | 102 | 102 | 102 |
Bed to Ram bottom | 235 | 275 | 330 | 432 | 470 | 597 | 635 | 673 | 711 |
Hole in ram for Punch - Dia | 38 | 38 | 51 | 51 | 51 | 79 | 79 | 79 | 79 |
Hole in ram for Punch Depth | 70 | 70 | 79 | 89 | 89 | - | 152 | 152 | 152 |
Adjustment ram | 19 | 19 | 25 | 32 | 32 | 32 | 32 | 32 | 32 |
Fly Wheal Dia | 508 | 550 | 610 | 787 | 914 | 965 | 1066 | 1167 | 1268 |
Gear Dia | 425 | 500 | 650 | 700 | 800 | 900 | 1066 | 1162 | 1263 |
Section of V Belts | B | B | B | B | B | C | C | C | C |
No. of V Belts | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 5 | 5 |
Mo. of Strokes per - minute | 76 | 70 | 60 | 55 | 40 | 35 | 30 | 30 | 30 |
Electric Motor (1440 RPM ) | 2 HP | 3 HP | 3 HP | 5 HP | 7.5 HP | 10 HP | 15 HP | 20 HP | 25 HP |
Gross Weight | 900 Kgs. | 1300 Kgs. | 1900 Kgs. | 3300 Kgs. | 4500 Kgs. | 6000 Kgs. | 8000 Kgs. | 10000 Kgs. | 13000 Kgs. |
Capacity | 3 Tons | 5 Tons | 10 Tons | 15 Tons | 20 Tons | 30 Tons | 50 Tons | 75 Tons | 100 Tons | 150 Tons | 200 Tons | 250 Tons |
Crank Shaft Dia. | 38 | 51 | 60 | 70 | 76 | 83 | 95 | 115 | 127 | 140 | 158 | 165 |
Stroke Adjustment | 2-19 | 6-25 | 6-25 | 10-38 | 13-51 | 13-63 | 13-76 | 13-102 | 13-15 | 13-127 | 13-152 | 13-165 |
Side Adjustment | 20 | 25 | 25 | 25 | 25 | 25 | 40 | 50 | 60 | 60 | 70 | 70 |
Hole in Ram | 19 | 25 | 25 | 32 | 32 | 38 | 51 | 51 | 55 | 55 | 63 | 63 |
Hole in Bed | 51 | 63 | 76 | 89 | 89 | 102 | 127 | 178 | 191 | 23 | 216 | 216 |
Length & Width of Bed | 255 x 152 | 305 x 178 | 356 x 203 | 432 x 254 | 457 x 305 | 508 x 355 | 660 x 406 | 711 x 508 | 813 x 558 | 914 x 610 | 965 x 660 | 1067 x 711 |
Dist. Bed to Ram / | 152 | 152 | 180 | 205 | 230 | 266 | 290 | 330 | 381 | 410 | 432 | 485 |
Stroke Per Minute | ||||||||||||
Geared (S.P.M.) I | 90 | 80 | 80 | 75 | 60 | 55 | 5 | 50 | 45 | 40 | 30 | 30 |
Ungeared (S.P.M.) II | 165 | 150 | 130 | 120 | 120 | 115 | 90 | - | - | - | - | - |
H.P./Rpm Ungeared | 0.5 / 960 | 0.5 / 960 | 1 / 960 | 1.5 / 960 | 2 / 960 | 3 / 960 | 5 / 960 | - | - | - | - | - |
H.P./Rpm Geared | 0.5 / 1440 | 0.5 / 1440 | 1 / 1440 | 1.5 / 1440 | 2 / 1440 | 3 / 1440 | 5 / 1440 | 7.5 / 1440 | 10 / 1440 | 15 / 1440 | 20 / 1440 | 25 / 1440 |
Floor to Top of Bed | 520 | 690 | 730 | 740 | 815 | 815 | 900 | 915 | 915 | 915 | 1000 | 1050 |
Weight Approx. Kg. | 200 | 300 | 450 | 700 | 900 | 1100 | 2350 | 3500 | 5000 | 6000 | 9000 | 11500 |
Maximum Pressure | 50 Tons | 80 Tons | 100 Tons | 160 Tons | 200 Tons |
Bolster Area LR.-F.B. | 700 X 500 | 750 X 550 | 1000 X 600 | 1050 X 600 | 1100 X 600 |
Stroke Fixed | 40 | 40 | 45 | 45 | 45 |
Bed to Ram Bottom | 300 | 300 | 300 | 350 | 350 |
Slide Area L.R.-F.B. | 500 X 400 | 550 X 400 | 900 X 500 | 900 X 500 | 1000 X 500 |
Strokes Per Minute | 90 | 90 | 80 | 80 | 80 |
Section of V Belts | B | B | B | C | C |
No of V Belts | 3 | 3 | 3 | 4 | 4 |
Main Motor (960 RPM) | 3HP | 5HP | 10HP | 15HP | 20HP |
Maximum Pressure | 25 Tons | 40 Tons | 63 Tons | 80 Tons | 110 Tons | 160 Tons | 250 Tons |
Bolster Area L.R. - F.B. | 640 x 380 | 750 x 460 | 800 x 500 | 850 x 550 | 1100 x 700 | 1250 x 800 | 1350 x 900 |
Stroke Adjustable | 75 | 75 | 87 | 100 | 125 | 150 | 150 |
Slide Adjustment | 50 | 50 | 50 | 50 | 70 | 70 | 70 |
Bed to Ram Bottom | 300 | 350 | 375 | 425 | 600 | 800 | 900 |
Hole in Bed | 130 | 150 | 170 | 190 | 212 | 250 | 300 |
Shank Hole | 50 | 50 | 50 | 50 | 80 | T SLOT | T SLOT |
Stroke Per Minute | 60 | 55 | 50 | 40 | 35 | 35 | 30 |
Section of V-Belts | B | B | B | B | B | C | C |
Main Motor (1440 RPM) | 3 HP | 3 HP | 5 HP | 7.5 HP | 1O HP | 15 HP | 20 HP |