Milling Machines

Our product range contains a wide range of Universal Engraving Cum Milling Machine, Pantograph Milling Machine, Universal Milling Machine, Vertical Milling Machine and All Geared Autofeed Universal Milling Machine

Universal Engraving Cum Milling Machine

Drive Motor 1/2 B.H.P. 2800 R.P.M. Cord drive
Spindle Spindle speed range 1800 to 15000 R.P.M.
Spindle fine adjustment 1/8 Spindle coarse adjustment 1/4
Spindle collet taper 10° Pantograph
Pantograph arm largest 1 : 1
smallest 1 :50
Work Table Longitudinal Travel 12
Main slide cross travel 6 Work table clamping area 12
Work table up and down 10 Copy Holder Table
Copy holder table clamping area 18 Max. Height between copy holder and pantograph arm 3/4

special extra accessories :

rough milling attachment
single lip tool grinder model mtg-1
indexing workholder
electric acting attachment
roll engraving attachment
machine vice with seivel base width of 100 mm jaws
rotary table 200 mm
template set a to z and 0 to 9 height of 20 mm (set of 107 numbers)
machine lamp
dove tail strip for template
auxilary table

standard accessories :

electric equipment suitable for 3 phase, 415 volts, 50 cycles, a c supply.
set of servicing tools
two clamps for workholder
two clamps for copyholder
one spring collet for cutter spindle
one collet for tracing stylus
one set of 6 numhers stylus

View Complete Details

Ask Latest Price & Details

Pantograph Milling Machine

Clamping area 210 x 360 mm
(Max distance trace head to table top) 300 mm
Vertical traverse 250 mm

Universal 3 Dimentional Pantograph Milling Machine, Our product portfolio now includes over 300 cutting-edge products that meet various requirements & specifications. Atlas Machines also has presence in the global markets, and exports Machinery & Equipment World Wide.

View Complete Details

Ask Latest Price & Details

Universal Milling Machine

swivel model is made of high grade casting. Hardened and ground steel jaw plates fitted, totally enclosed screw with square head hardened operating in phosphorbronze nut, swivel base. Graduated to 360 degrees. Available in 100, 150, 200 mm sizes.

MODEL	AMI-0A	AMI-01	AMI-1.5	AMI-2	AMI-3	AMI-4
TABLE
Working Surface	900 x 210	1000 x 225	1050 x 250	1250 x 275	1350 x 300	1600 x 350
Number & Size of T-Slots	3x 13	3x13	3x13	3x13	3x15	3x15
Distance between T-Slots	45	50	55	65	75	80

FEEDS
Cross	150	160	200	228	279	305
Vertical	300	325	375	432	507	610
Longitudinal	425	475	525	625	675	810

SPINDLE
Arbor	25.4	25.4	25.4	25.4	25.4	25.4
Number of Speeds	6(50 to 1000)	6(50 to 1000)	9(50 to 750)	9(50 to 950)	9(50 to 950)	9(50 to 950)
Taper	ISO-30	ISO-30	ISO-40	ISO-40	ISO-40	ISO-40
Distance from Spindle to Top (min. - max.)	10-275	10-300	10-350	10-400	10-500	10-600

MOTORS
Spindle	2H.P. 1440RPM	2 H.P. 1440RPM	2 H.P. 1440RPM	2 H.P. 1440RPM	3H.P. 1440RPM	5H.P. 1440RPM
Coolant	0.10 H.P. 2800 RPM	0.10 H.P. 2800 RPM	0.10 H.P. 2800 RPM	0.10 H.P. 2800 RPM	0.10 H.P. 2800 RPM	0.10 H.P. 2800 RPM

WEIGHT
Net	900 Kg.	1100 Kg.	1400 Kg.	2500 Kg.	`3500 Kg.	4000 Kg.
Gross	1100 Kg.	1350 Kg.	1600 Kg.	3000 Kg.	`4000 Kg.	4500 Kg.

VERTICAL ATTACHMENT ON RAM
Cross	110-225	125-275	125-350	135-425	135-400	135-535
Vertical	75-300	125-350	150-435	100-500	100-575	100-625
Speeds for Vertical Head (Ram Type)	3 (380-960)	3 (380-960)	6 (160-425)	6 (95-550)	6 (95-550)	6 (50-450)

View Complete Details

Ask Latest Price & Details

Vertical Milling Machine

All machines are supplied complete fitted with suitable electric 3 phase A/C supply complete with spare parts with wiring starter and panel bolt motorised coolant system with assembly machine lamp and arbour dia. 1 no., foundation bolts, tool box and instruction manual.

MODEL	AMI-1	AMI-2	AMI -3	AMI -4
TABLE
Working Surface	1270 x 280	1400 x 330	1600 x 350	1800 x 400
Swivel	±45°	±45°	±45°	±45°
T-Slot No. / Size	3,17	3,17	3,17	4, 17
T-Slot Centre	65	80	90	90
Longitudinal Travel	650	775	950	1200
Cross Travel	205	250	305	450
Vertical Travel	380	505	545	650

FEEDS
No. of Rapid Feeds	2	2	2	2
Longitudinal Rapid Feeds / Min.	735-1065	735-1065	735-1065	735-1065
No. of Feeds	18	18	18	18
Range of Longitudinal / Cross Feed Per Minute	13 to 305	13 to 305	13 to 305	13 to 305
Range of Vertical Feed Per Miute	5 to 100	5 to 100	5 to 100	5 to 100

SPINDLE
Spindle Taper	ISO 40	ISO 40	ISO 40	ISO 40
No. of Speeds	12	12	12	12
Range of Spindle Speeds	40 to 1120 RPM	40 to 1120 RPM	40 to 1120 RPM	40 to 1120 RPM
Distance of Spindle to
Table Min. / Max.	25 / 380	25 / 505	25 / 545	25 / 600
Distance of Spindle Centre to Column Guide	300	350	375	425
Vertical Head Tilt	±90°	± 90°	± 90°	±90°
Manual Quill Travel	95	95	95	95

ELECTRICALS
Main Motor	5.0 HP	7.5 HP	7.5 HP	10HP
Feed Motor	2.0 HP	2.0 HP	2.0 HP	3.0 HP
Coolant Motor	0.1 HP	0.1 HP	0.1 HP	0.1 HP

DIMENSIONS
Overall Length	1850	2000	2100	2400
Width	1600	1750	1950	2100
Height	2080	2200	2300	2400
Net Weight in Kgs.	2600	3300	3700	5000
Gross Weight in Kgs.	2900	3600	4000	5500