Mumbai, Maharashtra, India
Our Products
| STANDARD EQUIPMENT : | |
| Permanent Parallels | 1 set |
| Parallels 130 mm High | 1 set |
| Parallels 160 mm High | 1 set |
| Parallels 200 mm High | 1 set |
| Bearings for Boring Bars (4 pieces) | 1 set |
| Tapered Centering Cones (4 pieces) | 1 set |
| Boring Bar | 30 x 1600 mm |
| Hardchrome-plated | 1 no. |
| Boring Bar | 48 x 1900 mm |
| Hardchrome-plated | 1 no. |
| Cutter Heads for: | |
| 30 mm Boring Bar (OD 50 x 70 mm) | 1 each |
| 48 mm Boring Bar (OD 90 x 115 mm) | 1 each |
| Extra Support for Boring Bars | 1 set |
| Boring Bar Rest | 1 no. |
| Tool-setting Micrometer with Dial Indicator and Magnetic Base | 1 no. |
| Tool-setting Device for Cutter Heads | 1 no. |
| (Micrometer mentioned above may be used with it) | |
| Centering Device with Dial Indicator | 2 nos. |
| Boring, Facing and Chamfering Tools | 26 pieces |
| Clamps, Bolts and Operating Tools | 1 set |
| Machine Lamp | 1 no. |
| Operation Manual | 1 no. |
| Model | AMI - 1500 | AMI - 2500 | |
| Maximum Length of Block | 1550 mm | 2600 mm | |
| Distance from Built-in Parallels to Boring Bar | Maximum | 815 mm | 815 mm |
| Minimum | 515 mm | 515 mm | |
| Boring Capacity | |||
| - With standard boring bars | 34 - 150 mm | 52 - 225mm | |
| - With extra boring bars of 22 mm and 60 mm dia | 26 - 225 mm | ||
| Spindle Speeds (rpm) | Infinitely variable from 50-750 rpm in two steps | variable from 50 - 750 rpm in two steps | |
| Feed: Both Directions (Automatic and manual) | Roughing | 0.15 mm | 0.15 mm |
| Finishing | 0.04 mm | 0.04 mm | |
| Maximum Travel of Boring Bar | 325 mm | 325 mm | |
| Additional Travel with Extension Bar (extra equipment) | 260 - 325 mm | 260 - 325 mm | |
| Drive Motor (440V, 50tn) Three Phase | 1.5 HP | 1.5 HP | |
| (other standard voltages available on request) | |||
| Length of Machine | 3550 mm | 4850 mm | |
| Width of Machine | 760 mm | 760 mm | |
| Width of Bed | 570 mm | 570 mm | |
| Maximum Height of Machine | 2200 mm | 2200 mm | |
| Work Space required | 5050 x 1760 mm | 6000 x 1760 mm | |
| Net Weight | 1700 kg (approx.) | 2200 kg. (approx.) | |
| Gross Weight | 2200 kg (approx.) | 2850 kg. (approx.) | |
This Machine is used for faster operation of Line Boring of the Main Bearings and Cam Shaft Bearings of Automobile & Tractor Engines. The bar supplied with the machine is made from special alloy steel and grounded to accurate size. The machine is supplied with all equipments required for full Operation.
STANDARD ACCESSORIES :
Single Phase Motor Ac 220 250V with flexible wire & 3 pin plug, Equipment Box, Micrometer, Tool Lapping Fixture, Lapping Disc, Tool Holders with one cutter bit, Anchoe Assemble & 5 sets of Guiders (for 001 3 set of Guiders) & Necessary Operating Spanners.
Vertical Fine Boring Machine is specially designed for fine and accurate machining of cylinder bores. Manufacturers ensures years of trouble free operation as every phase of manufacturer is under strict quality control. Base and column are of high grade casting. Boring head travels on a Hardened & Grounded finished guide ways column protected with bellows. Boring head is fitted with hardened alloy gears to give smooth feed and side on column. Controls are provided on one side of the machine on a comfortable position and easy operation. Two tool holders for boring. Portable Grinder with suitable GrindingLapping Wheels. Two Block Jacks. Two Sets of Parallel Blocks. Service Spanners. One spindle fitted with the Machine, bore dia capacity 64-135 mm.
Vertical Fine Boring Machine is specially designed for fine and accurate machining of cylinder bores. Manufacturers ensures years of trouble free operation as every phase of manufacturer is under strict quality control. Base and column are of high grade casting. Boring head travels on a Hardened & Grounded finished guide ways column protected with bellows. Boring head is fitted with hardened alloy gears to give smooth feed and side on column. Controls are provided on one side of the machine on a comfortable position and easy operation. The Machine is supplied with the following standard equipment :
|
| WORKING CAPACITY | MODEL AMI-550 W | MODEL AMI-650 E |
| Boring Capacity | 45-200 mm | 32 - 250 mm |
| Boring Depth Max. | 405 mm | 450 mm |
| MAIN FEATURES | ||
| Spindle Travel Max. (D) | 600 mm | 600 mm |
| Useful Table Surface | 1168 mm x 457 mm | 1305 mm x 457 mm |
| Table Cross Transverse Max. | 32 mm | 32 mm |
| Table Transverse Max. | 1244 mm | 1400 mm |
| SPEED | ||
| Spindle rotations | 80 - 140 - 274 - 340 - 480 - 600 | 80 - 140 - 274 - 340 - 480 - 600 |
| Spindle Head Feed/revotation | 0.07, 0.10 , 0.17 | 0-07 - 0. 10, 0.17 |
| Rapid Up and Down | 600 mm | 750 mm |
| MOTOR RATING | ||
| Spindle | 1.5 HP | 2HP |
| Rapid Up and Down | 1/2HP | 1HP |
| DIMENSIONS AND WEIGHT | ||
| Length | 1170 mm | 2050 mm |
| Width | 1390 mm | 1450 mm |
| Height | 2210 mm | 2370 mm |
| Approx. weight (Net) | 2200 kg | 2500 kg |
| Approx. weight (Gross) in wooden case | 3000 kg | 3300 kg |
