Other Products / Services #1911223

Foot operated Impact Press model AMI-10 equipped with handchrome pillar, T slotted base for work holding. The precise control of striking load, the adjustable arm and wide throat permit using the press in various industries having maximum adjustable pressure upto 1000Kgs. working surface of table 150 x 100 mm, throat centre distance 130 mm.

Ht winding machine, Our product portfolio now includes over 300 cutting-edge products that meet various requirements & specifications. Atlas Machines also has presence in the global markets, and exports Machinery & Equipment World Wide.

Indigenous make treadle operated shearing and corner cutting machine suitable for cutting corners of tin containers, and cutting sheets upto 6" width in 24 swg, sheets complete with four edge cutting blades, spring and corner cutting attachment.

Steel Fabricated fracture Proof Housings. Wear resistant forged premium steel rolls. Longitudal Grooves on Bottom rolls for correct Feeding of Plates. Build in Lubricated Storage. Circumferencial and Axial Grooves on Gun Metal Bearing for even Lubrication. Gun Metal Bush Bearings. Dropend opening system for easy removal of rolled shells. Minimised feeding height for easy operation. Well balanced design. Controlled roll speed for accurate curvature performance. Indicators provided for correct even top roll presure. Mechanical device Mechanism for easy sliding of non drive side top roll housing. Motor of reputed make. Worm Reduction Gear-Box of reputed make. Reverse Forward starter with overload thermal relay of reputed make like SiemensL & TCutler HammerHKS. One piece fabricated heavy duty base frame.

Automatic wire straightening and cutting machine having an exclusive and elite combination of speed and accuracy backed by intensive research of experts. These machines are used where wire is further processed in rods, coiled wire accurate straightening, close length tolerances and high output are of importance, widely used by electric welding rods manufactures, electric fan guards, refrigerator racks, cloth hangers, automobile parts, electric parts industry, gives you both financial and inner core satisfaction as it is very easy to use requires no special skill.

Indefinite length of wire can be cut out without automatic attachment. The machine operates by drawing the wire from the coil through the fast rotating spinner, passes through a cutting of tool into the scaling bar where it strikes at the adjusted length and this stroke makes the cutting mechanism complete. This straightening function is performed by 5 straightening blocks which are adjustable and contains a simple to use straightening bush lets the user to make replacement to his own work

we are offering through feed edge banding machine

Hydraulic puller - Remote controlled comprising of hollow ram cylinder hand operated high pressure, single acting, single piston, Hydraulic pump with pressure gauge adoptor, 2 meter long high pressure rubber hose but without any attachmnets.

OPTIONAL :

• DoubleTool Post


• Auto Lifting


• Grinding attachment


• Side Tool Post


• Milling attachment


• Auto Lubrication

DESIGN & WORKMANSHIP :AMIlathe machines have been designed to cater need of sustained accuracy and superb finishing.AMIlathes are guaranteed for their original design, and are tested to the graded limits with specially imported precision tools.

BED :The bed being the foundation of the lathes is carefully designed and is of high grade cast iron. It has cross-ribs to support its walls and three inverted 'VEES' assembled with a removable gap for large swing.

HEAD STOCK :The head-stock is of top quality castingsprovidingsupport to the spindle bearings. The bearings are of the following three types:

(a) Parallel Brass with thrust Bearing, (b) Conical Brass, (c) Taper Roller Bearing. The inain spindle is the best steel with a finish to give accurate results. Head Stock gears are of "Clutch system" of high production in small machines & "Kirloskar system" in large machines.

SADDLE :The 'V ways running on the bed and the slides are most accurately hand scrapped and aligned accurately with the bed and the headstock. The saddle is fitted with 'Hand' and 'Automatic' transfers along the bed with steel rack and Pinion.
It is assembled with cross and upper slide graduated to give desired angles.

TOOL POST :The Toll-Post is made out of one piece steel block and can hold four different tolls at a time and can be swivelled to any desired angle.

APRON :The apron gives movement to the saddle for screw cutting sliding and surfacing by means of enclosed gears and half nut. All gears are of steel and are well tempered.

TAIL STOCK :The tailstock is designed to give maximum strength bolt operation. It has long bearing within the barrel and ensures true alignment.

THREE SPEED GEAR BOX :The Three speed gear box is provided with the lathe to obtain coarse, medium and fine cutting ranges, both long and cross on the feed bar through gears. The lead screw with accurate threads is to be used only for thread cutting & can beengaged or disengaged with a handle provided on the gear box whilethe other handle is for obtaining the desired three speeds.

STANDARD ACCESSORIES :

• True Chuck


• Taper Turning Attachment


• Coolant Pump Tray & Fittings


• Revolving Centre


• Heavy Duty Grinding Attachment


• Heavy Duty Roller Type Steady Rest for Sugar Mills Rolls

edge banding machine, our product portfolio now includes over 300 cutting-edge products that meet various requirements & specifications. Atlas machines also has presence in the global markets, and exports machinery & equipment world wide.

Hydraulic puller - Remote controlled comprising of hollow ram cylinder hand operated high pressure, single acting, single piston, Hydraulic pump with pressure gauge adoptor, 2 meter long high pressure rubber hose but without any attachmnets.

We are offering end cutter

It comprise of grease pumps/oil pumps/oil transfer pumps which are specifically designed to lubricate vehicles and transfer the lubricant oil from drum to container. The pneumatically operated versions are suitable for mounting on 200 kgs. barrels or 50 kgs. portable drums. The hand operated pumps can be mounted on 25, 10 & 5 kgs. drums accordingly.

SPECIAL FEATURES :

Standard Equipment :
Single Phase Motor A/c 220 / 250V with flexible wire & 3 pin plug, Equipment Box, Micrometer, Tool Lapping Fixture, Lapping Disc, Tool Holders with one cutter bit, Anchoe Assemble & 5 sets of Guiders (for 001 3 set of Guiders) & Necessary Operating Spanners.

STANDARD ACCESSORIES

STANDARD EQUIPMENTS :
Electric Motors Complete with Panel Board & Pendant Control for all operations. One Steel Telescopic Cover, One Boring Bar, Working Spindle Support Guide for Vibration Control, Co-ordinate reading arrangement with Scales & Verniers for X. Y.Z.-Axis and Handles. Facing head, 2No. Lubricating Pumps, 5 No. limit Switches & Automatic Rapid Travel, fitted with the Machine. Revolving Centre with 6"True Chuck Three Nos. Dial Indicators duly fitted in dust proof housings with attachment & Electric Coolant Pump.

EXTRA EQUIPMENTS :

• Milling Attachment.


• Taper Boring Attachment.


• Threading Attachment.


• 2Axis D.R.O.

POLISHING DRUM
is made from steel fabricated angles & thick sheets. It required 2 HP. electric motor. It revoles at 40 to 45 R.P.M. & having a 200 Kg. capacity.

Universal Combination bending brakes represent a modern departure from the old conventional hand brake design. They are not limited to straight bending and box and pan work alone, but will accommodate inside bending, radius forming many other intricate forming operations with special attachments. They are limited in versatility only by the operator's ingenuity.

These brakes will form a 1" flange over the entire length in their rated capacity. Heavy duty springs reduce clamping effort and adjustable counterweights reduce bending effort. The upper beam may be moved directly to the rear either 6 or 8 inches to accommodate box fingers and special forming attachments. The normal maximum opening between the upper beam and the lower beam is 1.3/4 " and may be increased to 4" to accept box and pan fingers. When the apron angle iron work support is removed, brake capacity is reduced by 2 gauges.

When the apron angle iron work support and apron filler plates are removed, brake capacity is reduced by 4 gauges. When both are removed , 1/4" reverse bends may be made except on 8 foot and 10 foot, 12 foot gauge brakes only 3/8" reverse bends may be made. When bending stainless steel brake capacity is reduced 4 gauges for both straight and finger bending.

Bed is hyperbolic bridge constructed type and specially designed wide opening to easy chip disposal. It is heavily ribbed and robust constructed in Banka 35, 36, 43 and 60 models. Hardened & ground bed ways, gears, spindle, spline, shaft, quill, etc. (Turcite B) Linear Bearing System on Carriage.

Head stock body is of latest specially designed. The spindle is mounted on selected precision bearings. Spindle speeds in geometric progress ratio. Oil infiltration splash lubrication. American Lo type spindle nose.

Gear box arrangement for real time saving equipment. Quick change gear box provides changes of feeds & threads. Separate lead screw & feed shaft for threading pitch accuracy.

Apron is totally enclosed oil bath system. T-slot on carriage for mounting special features. Lever type arrangement for automatic feeds.

Graduation dial for tail stock & wheel movement. Metric system micro collar for all screws & nuts. Tail stock sleeve is tang shank type for heavy drilling. Easy to operate & Inter changeable parts. Trolley type chip disposal system.

HAND - OPERATED BENDERS :
Benders are available in five rugged hand operated models. Bending capacity covers a material range from 1/16" wire to 1.1/4" inch round steel bar or its equivalent. Benders from a wide range of stock shapes including round, square, hexagonal, flat, and channel (all bar stock) and tubing. They come equipped with bend locating gauge for part duplication, Angle stop to determine degree of bend and locking pin to securely damp material. Radius forming possibilities from 0 to 12 inches. Torrington rollers installed in main bearing reduce friction, facilitate easy bending, and help bend large stock easily. Ratchet power assist for large stock is standard on Hand Model No. 4 and No. 5.

STANDARD EQUIPMENT :

• Bend locating gauge- setting this gauge allows any number of parts to be duplicated.


• Angle stop - locating this determines degree of bend.


• Locking pin - adjusting this securely damps material.


• Centre pin - provides one radius setup plus mount for other tooling.

EXTRA ACCESSORIES :

• Extention Handle (Model 2 & 3 only)


• Quick - Lock clamp


• Rugged welded work stand


• Die sets (Various sizes)

Provided with motor arrangement having length of bed and all other specifications catalogue enclosed here with, complete with electric motor 3 phase, 440 volts, motor pulley, v belt, switch spur and cup face plate with screw centre.

Hand operated portable hydraulic busbar bending machine ideally suitable for bending flat iron m.s. copper flat bars, round and square bars with hydraulic pressure and reverse pressure control complete with one set of M.S. former for bending bus bars having following specifications.

STANDARD ACCESSORIES :

• Face Plate


• Steady Rest


• Follow Rest


• 4 Jaws Dog Chuck with Chuck Flange


• Gear Set


• Suitable Electric Motor 3 Phase


• Motor Pulley


• V-Belt


• R/F Switch

STANDARD ACCESSORIES:

• Face Plate


• Steady Rest


• Follow Rest


• 4 Jaws Dog Chuck with Chuck Flange


• Gear Set


• Suitable Electric Motor 3 Phase


• Motor Pulley


• V-Belt


• R/F Switch

DESIGN & WORKMANSHIP : AMI lathe machines have been designed to cater need of sustained accuracy and superb finishing. AMI lathes are guaranteed for their original design, and are tested to the graded limits with specially imported precision tools.

BED : The bed being the foundation of the lathes is carefully designed and is of high grade cast iron. It has cross-ribs to support its walls and three inverted 'VEES' assembled with a removable gap for large swing.

HEAD STOCK : The head-stock is of top quality castings providing support to the spindle bearings. The bearings are of the following three types:

(a) Parallel Brass with thrust Bearing, (b) Conical Brass, (c) Taper Roller Bearing. The inain spindle is the best steel with a finish to give accurate results. Head Stock gears are of "Clutch system" of high production in small machines & "Kirloskar system" in large machines.

SADDLE : The 'V ways running on the bed and the slides are most accurately hand scrapped and aligned accurately with the bed and the headstock. The saddle is fitted with 'Hand' and 'Automatic' transfers along the bed with steel rack and Pinion.
It is assembled with cross and upper slide graduated to give desired angles.

TOOL POST : The Toll-Post is made out of one piece steel block and can hold four different tolls at a time and can be swivelled to any desired angle.

APRON : The apron gives movement to the saddle for screw cutting sliding and surfacing by means of enclosed gears and half nut. All gears are of steel and are well tempered.

TAIL STOCK : The tailstock is designed to give maximum strength bolt operation. It has long bearing within the barrel and ensures true alignment.

THREE SPEED GEAR BOX : The Three speed gear box is provided with the lathe to obtain coarse, medium and fine cutting ranges, both long and cross on the feed bar through gears. The lead screw with accurate threads is to be used only for thread cutting & can be engaged or disengaged with a handle provided on the gear box while the other handle is for obtaining the desired three speeds.

STANDARD ACCESSORIES :

• True Chuck


• Taper Turning Attachment


• Coolant Pump Tray & Fittings


• Revolving Centre


• Heavy Duty Grinding Attachment


• Heavy Duty Roller Type Steady Rest for Sugar Mills Rolls

standard accessories :
two dead centres, centre sleeves, square tool post, tool post key, gear set for mm & inch thread, carrier plate, motor pulley, thread chart, suitable electric motor, dog chuck with flangue, r/f switch, v belt.

optional accessories :
quick change norton gear box, rear tool post, taper turning attachment, coolant unit with assembly, machine lamp, 3 jaw true chuck, chuck flange, face plate, steady rest & follow rest, revolving centre.

Conrete Mixers SMM - 1 (107) Concrete Mixer With Mechanical Hopper, Lever type concrete batcher is useful device for weighing for production of controlled concrete, mounted on a robustly fabricated chassis of heavy steel section with four M. S. Wheels. Lever mechanism is suitably designed with gearing for proper weighing. Discharge chutes provided with hoppers are suitably designed for quick discharge of the aggregate in the mixer hopper. Suitable design for M15, M25 & M30.

Size and Specification as requested by you. (S. P. M. - Tailor made as per your specification)

Tilting Bucket Trolley, Our product portfolio now includes over 300 cutting-edge products that meet various requirements & specifications. Atlas Machines also has presence in the global markets, and exports Machinery & Equipment World Wide.

ensuring a parallel cut. This cut takes place on the draw stroke & the hydraulically liften out of contact with the workpiece on the forward stroke to prevent wear or the blade & can out metals of all kinds & strength.

FEED : Two levers are provided at the pot one regulators the rate of feed while the other enabled the bow slide to be raised or forwarded hydraulically bow raised automatically & motor Switched off on completion of the cut.

BED : The bed is of large proportion provided with guide ways for the vice for clamping the material vice is of rigid constructional. One jaw remains fixed & the other can be adjusted according the material to be cut.

ELECTRICAL EQUIPMENT :A direct on line push bottom starter can be fitted which incorporates & adjustable trip mechanism which stops the machine as soon as the blade is clear from the work non productive time is reduced to minimum.

DRIVE : Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive mechanism being totally enclosed.

SPEED : The incorporation of two-speed driving mechanism allows for the most suitable speed to selected for material being cut.

COOLANT : The Coolant tank is totally enclosed in the machine base & a Speed Pump supplies coolant to the saw blade through a stay put pipe & top.

• 
  
  Machine supplied with suitable electric motor with starter, wiring, mechanical coolant pump, set of V belt and vice - saw blade in extra cost
  
  


• 
  
  Machine upto cutting are 16" are single hydraulic unit and 18", 20", 24" are having two hydraulic units
  
  

Hand operated slipout type bending rollers are specially designed for bending sheet into complete cylinders or curving them to suit different type of panel work equipped with a set of 3 mild steel properly machined, rollers, two rolls having grooves for permitting sheets previously wired, the front bottom roll has adjustment to suit various thickness of materials being admitted where as the back roll has adjustment for various diaes of cylinders to be distortion, mounted on, stand:

Automatic Paper Pin Making Machine, Our product portfolio now includes over 300 cutting-edge products that meet various requirements & specifications. Atlas Machines also has presence in the global markets, and exports Machinery & Equipment World Wide.

standard equipment :

• suitable electric 3 phase 440 volts
  50 cycle with starter and fittings


• splash guard


• one collet


• bar stopper


• spanner set


• coolant pump with assembly

extra equipment :

• vertical slide


• bar feeding attachment


• threading and cutting attachment


• tool holder


• true chuck with chuck rate