Industrial & Engineering Products

Our offered Product range includes Overcrank Mechanical Motorised Shearing Machine, Mechanical Under Crank Shearing Machine, Undercrank Mechanical Motorised Shearing Machine, Mechanical Plate Rolling Machine and Mechanical Over Crank Shearing Machine.

Overcrank Mechanical Motorised Shearing Machine

Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability having the following main features:

Frame : Rigid steel frame of shears are optimally designed to avoid week sections at load support and is of interlocked design.The ram is guided throughout its length by accurate machined guideways ensuring proper clearance and clean cut.

Hold-down system : Spring loaded mechanical Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Holddown units are provided with oversize pads to avoid impressions on sheet metal on request. Hold-down system : Hydraulic Hold down pads are accurate calm operated pump. Hydraulic Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cut. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request at extra cost.

Knives : Shears are provided with high quality single segment (HcHcr) Knives for longer tool elite. Ease in assembling of knife reduces down-time. The knife blades are four edged. Lubrication : All bearing parts and guide surfaces are lubricated through hand-operated lubrication system. Mechanical backguage : This is standard equipment provided on all shears. Scale on backguage gives instantaneous reading of distance between shear and backguage. Thus avoiding errors and maintenance in electronic equipment. Finger guard : Fitted in front of hold-down for operator protection without abstructing viewing.

Model	Cutting Cap.In M.S Length X Thichness	Depth of Throat	Stroke Per Minute	Table Eight	Table Width	Front Gauge	Rear Gauge	Motor HP/KW	Blade Length x Width x Thick	Overall Dime. in mm
										Len.	Bre.	Hei.
										A	B	C
AMI-1	1270 x 6	80	30	770	450	600	750	7.5/5.6	1270 x 75 x 18	2250	1950	2300
AMI-2	1525 x 6	80	30	770	450	600	750	7.5/5.6	1525 x 75 x 18	2500	1950	2300
AMI-3	2030 x 6	80	30	770	450	600	750	10/7.7	2030 x 75 x 18	3000	1950	2300
AMI-4	2540 x 6	80	30	770	450	600	750	10/7.7	2540 x 75 x 18	3550	1950	2300
AMI-5	3125 x 6	80	30	770	450	600	750	15/11.2	3125 x 75 x 18	4100	1950	2400
AMI-6	1270 x 8	80	30	770	450	600	750	10/7.7	1270 x 75 x 18	2350	1950	2300
AMI-7	1525 x 8	80	30	770	450	600	750	10/7.7	1525 x 75 x 18	2570	1950	2300
AMI-8	2030 x 8	80	25	800	450	600	750	12.5/9.7	2030 x 75 x 18	3150	1950	2500
AMI-9	2540 x 8	80	25	800	450	600	750	15/11.2	2540 x 75 x 18	3670	1950	2500
AMI-10	3125 x 8	80	25	800	450	600	750	20/15	3125 x 90 x 18	4250	1950	2600
AMI-11	1270 x 10	80	25	800	450	600	750	12.5/9.7	1270 x 90 x 18	2400	1950	2500
AMI-12	1525 x 10	80	25	800	450	600	750	12.5/9.7	1525 x 90 x 18	1950	1950	2500
AMI-13	2030 x 10	80	25	800	450	600	750	15/11.2	2030 x 90 x 18	3200	1950	2600
AMI-14	2540 x 10	80	25	800	450	600	750	20/15	2540 x 100 x 22	3700	1950	2600
AMI-15	3125 x 10	80	25	800	450	600	750	25/18.7	3125 x 100 x 22	4300	1950	2600
AMI-16	1270 x 13	80	25	800	450	600	750	15/11.2	1270 x 100x 22	2480	1950	2600
AMI-17	1525 x 13	80	25	800	450	600	750	15/11.2	1525 x 100 x 22	2740	1950	2600
AMI-18	2030 x 13	80	25	800	450	600	750	20/15	2030 x 100 x 22	3250	1950	2600
AMI-19	2540 x 13	80	25	800	450	600	750	25/18.7	2540 x 100 x 22	3750	1950	2600
AMI-20	3125 x 13	80	25	800	450	600	750	30/22.5	3125 x 100 x 22	4350	1950	2600
AMI-21	1270 x 16	80	25	800	450	600	750	20/15	1270 x 100 x 25	2690	2100	3100
AMI-22	1525 x 16	80	25	800	450	600	750	20/15	1525 x 100 x 25	2950	2100	3100
AMI-23	2030 x 16	80	25	800	450	600	750	25/18.7	2030 x 100 x 25	3450	2100	3100
AMI-24	2540 x 16	80	25	800	450	600	750	30/22.5	3540 x 100 x 25	3950	2200	3100
AMI-25	3125 x 16	80	25	800	450	600	750	40/30	3125 x 100 x 25	4500	2200	3150

View Complete Details

Ask Latest Price & Details

Mechanical Under Crank Shearing Machine

CUTTING CAP. IN MS length x thickness 1270 x 2
DEPTH OF THROAT (MM) 50
TABLE HEIGHT M (M) 785

Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability having the following main features: Spring loaded mechanical Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Holddown units are provided with oversize pads to avoid impressions on sheet metal on request.

View Complete Details

Ask Latest Price & Details

Undercrank Mechanical Motorised Shearing Machine

Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability having the following main features:]

Frame : Rigid steel frame of shears are optimally designed to avoid week sections at load support and is of interlocked design.The ram is guided throughout its

length by accurate machined guideways ensuring proper clearance and clean cut.

Hold-down system : Spring loaded mechanical Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Holddown units are provided with oversize pads to avoid impressions on sheet metal on request. Hold-down system : Hydraulic Hold down pads are accurate calm operated pump. Hydraulic Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cut. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request at extra cost. Knives : Shears are provided with high quality single segment (HcHcr) Knives for longer tool elite. Ease in assembling of knife reduces down-time. The knife blades are four edged. Lubrication : All bearing parts and guide surfaces are lubricated through hand-operated lubrication system. Mechanical backguage : This is standard equipment provided on all shears. Scale on backguage gives instantaneous reading of distance between shear and backguage. Thus avoiding errors and maintenance encounted in electronic equipment. Finger guard : Fitted in front of hold-down for operator protection without abstructing viewing.

MODEL	CUTTING CAP. IN MS length x thickness	DEPTH OF THROAT (MM)	STROKES PER MINUTE	TABLE HEIGHT M (M)	MAIN MOTOR	OVER ALL DIMENSIONS (APP.)
MODEL	CUTTING CAP. IN MS length x thickness	DEPTH OF THROAT (MM)	STROKES PER MINUTE	TABLE HEIGHT M (M)	MAIN MOTOR	LENGTH	BREADTH	HEIGHT
AMI -1	1270 x 2	50	50	785	2	2000	1400	1300
AMI-2	1525 x 2	50	50	785	2	2500	1400	1300
AMI-3	2030 x 2	50	50	785	3	3000	1400	1300
AMI-4	2540 x 2	62	50	800	3	3500	1700	1400
AMI-5	1270 x 3	70	50	800	5	2290	2000	1525
AMI-6	2000 x 3	70	50	800	7.5	2540	2000	1525
AMI-7	2500 x 3	70	50	910	10	3050	2000	1525
AMI-8	3125 x 3	70	50	910	15	3550	2000	1525
AMI-9	1270 x 4	75	50	900	5	2290	2000	1525
AMMO	1525 x 4	75	50	900	5	2540	2000	1525
AMI-11	2030 x 4	75	50	900	7.5	3050	2000	1525
AMI-12	2540 x 4	75	50	900	10	3550	2000	1525
AMI-13	3125 x 4	75	50	900	15.5	4200	2000	1525

View Complete Details

Ask Latest Price & Details

Mechanical Plate Rolling Machine

CAPACITY (MM) 1250 x 3
DIA.OF TOP ROLL(MM) 100

Steel Fabricated fracture Proof Housings.Wear resistant forged premium steel rolls.Longitudal Grooves on Bottom rolls for correct Feeding of Plates.Build in Lubricated Storage.Circumferencial and Axial Grooves on Gun Metal Bearing for even Lubrication.Gun Metal Bush Bearings.Dropend opening system for easy removal of rolled shells.Minimised feeding height for easy operation.Well balanced design.Controlled roll speed for accurate curvature performance.Indicators provided for correct even top roll presure.Mechanical device Mechanism for easy sliding of non drive side top roll housing.Motor of reputed make.Worm Reduction Gear-Box of reputed make.Reverse Forward starter with overload thermal relay of reputed make like SiemensL & TCutler HammerHKS.One piece fabricated heavy duty base frame.

View Complete Details

Ask Latest Price & Details

Mechanical Over Crank Shearing Machine

Cutting Cap.In M.S Length X Thichness 1270 x 6
Depth of Throat 80
Stroke Per Minute 30

Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability having the following main features: Frame : Rigid steel frame of shears are optimally designed to avoid week sections at load support and is of interlocked design.The ram is guided throughout its length by accurate machined guideways ensuring proper clearance and clean cut. Hold-down system : Spring loaded mechanical Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Holddown units are provided with oversize pads to avoid impressions on sheet metal on request.

View Complete Details

Ask Latest Price & Details