We are leading supplier of this product.

Best quality Indian Make (5 cuttery) heavy duty auto feed with 4 speed gear box complete with electric motor, motor pulley, V belt starter having the following specifications.

Heavy duty Fixed Table Circular Saw machine provided with tilting blade can be tilt upto 45 to cut wood in taper shapes provided with suitable electric motor 3 phase, 440 volts motor pulley, V belt and push button starter.

Cutting ferrous metals with abrasive disc at 4000 R.P.M.
or
Non-ferrous metals with carbide tipped 60-80 teeth saw blade at 4000 R.P.M.
or
Non ferrous metals with high speed steel saw blade 125-140 teeth with coolant supply at 14 R.P.M. Equipped with Simple and less time consuming quick action screw vice with quick one side mitre cutting a graduated scale arrangement. Cutting is carried out DRY and is the fastest method. Abrasive disc is easily replaced by carbide tipped saw and by interchanging the pulleys, wood, non ferrous solids or sections, plastics or light alloys can be cut.

Cut-Off machines are versatile and cut nearly all materials in slabs, sections, tubes and bars. The cutting is by hand feed. It works at amazingly high speeds so that a solid m. s. bar of 25 mm dia is cut in almost 20 seconds. 60 x 60 x 8mm section in 25 seconds and 75 mm. dia pipe in 30 seconds, the Drive to cut-off wheel is from a motor through a set of vee belts on the wheel spindle. Motor is positioned on a hinged platform with counter-balancing spring for easy operation. An adjustable depth stop prevents accidental damages to cut-off wheel and regulates depth of cut.

Hand operated Precision Notching machine cuts all shearable materials especially useful where box, chasis and panel blanks are to be made. Notches as large as 160 mm x 150 mm in 16 Swg. mild steel can be made at the corner or in any position along the edge of a sheet. Ease of operation makes possible production rates which offen rival those of power driven equipment. Powerfull action of notcher is obtained through use of a roller cam, minimum operator effort is needed. Notches larger and smaller than 90 can be made in two operations. Straight shearing job can be done, too. Two handles of different lengths are provided. Short handle for production speed on lighter materials; long handle for notching heavier materials. Blades : The machine is equipped with four blades to solve any notching problem. The upper blades are fixed while the lower one's can be adjusted. For smooth cutting 5% to 10'% shearing gap should be provided. The blades are made out of special alloy

steel. The bottom blades have 4 cutting edges which gives longer life.

Adjustment of Blades : The adjustment of blades (Lower) is carried out by the four hexagon screws, provided under the rectangular table. Feeler gauge should be used for accurate gap setting. The machine has been set for average size of material. Table : A perfectly flat mild steel table has been fixed for resting of sheet. Gauges : Suitable gauges fixed on the top of table, have been provided. The position can be changed according to requirement. For fixing them at appropriate place tapped holes have been provided. Operation : The sheet to be notched should be placed on the Tables.It must bs butted against the gauge blocks. Then the head is brought down manually and the shearing action takes place. Maintenance : For the easy movement of the notching head. it is necessary to lubricate the guideways and cam guides periodically.

STANDARD EQUIPMENT : Short handle for working with light materials. Long handle for notching heavier materials, Adjustable gauges and standard set of blades (fitted).

Cut-Off machines are versatile and cut nearly all materials in slabs, sections, tubes and bars. The cutting is by hand feed. It works at amazingly high speeds so that a solid m. s. bar of 25 mm dia is cut in almost 20 seconds. 60 x 60 x 8mm section in 25 seconds and 75 mm. dia pipe in 30 seconds, the Drive to cut-off wheel is from a motor through a set of vee belts on the wheel spindle. Motor is positioned on a hinged platform with counter-balancing spring for easy operation. An adjustable depth stop prevents accidental damages to cut-off wheel and regulates depth of cut. Cut-Off wheel spindle runs in pre-loaded bearings and is equipped with recessed flangs an adequate guard. Floor Stand Heavy gauge sheet metal fabricated is braced for rigidly. Firm bolting to foundation is necessary when machine is put into operation. The starter with convenient reach is flush mounted on one side of the stand. Coolant Pump An independently driven motorised with tank having sward partion, Coolant Pump An independently driven motorised with tank having sward partion, pipes and spout is an extra equipment.

lt may be used only when high speed steel circular saw blade is used. Coolant is not required when used with abrasive wheel. Quick Cutting operation yields good cutting surface. For cutting ferrous metals or hard materials, aluminium oxide wheels (of normal corundum) i.e., soft wheels are recommended. For non-ferrous or soft materials, silicon carbide cut-off .wheels or metal cutting saws are recommended. Reinforced cut-off wheels minimize accidental breakages, last longer than normal cut-off wheels and are safe to operate. The life of grinding wheel mostly depends on the amount of work, material, size, strength or hardness of material, its alloy components etc. The Clamping Vice-Head unit in both AMI-16 and AMI-12 is "Quick Action Type". In AMI-16 it is tubular in which the the screw is entirely protected from the abrasive dust and hence the wear & tear of the screw is almost nil.In AMI-12 the screw vice is cam-actuated to clamp the job instantly.

Standard Equipment : Machine with motor, starter and vice.

Optional Equipment :

Standard Equipment : Machine with motor, starter and vice.

Optional Equipment :

We are leading supplier of this product.

Best quality Indian Make (5 cuttery) heavy duty auto feed with 4 speed gear box complete with electric motor, motor pulley, V belt starter having the following specifications.

Heavy duty Fixed Table Circular Saw machine provided with tilting blade can be tilt upto 45 to cut wood in taper shapes provided with suitable electric motor 3 phase, 440 volts motor pulley, V belt and push button starter.

Cutting ferrous metals with abrasive disc at 4000 R.P.M.
or
Non-ferrous metals with carbide tipped 60-80 teeth saw blade at 4000 R.P.M.
or
Non ferrous metals with high speed steel saw blade 125-140 teeth with coolant supply at 14 R.P.M. Equipped with Simple and less time consuming quick action screw vice with quick one side mitre cutting a graduated scale arrangement. Cutting is carried out DRY and is the fastest method. Abrasive disc is easily replaced by carbide tipped saw and by interchanging the pulleys, wood, non ferrous solids or sections, plastics or light alloys can be cut.

Cut-Off machines are versatile and cut nearly all materials in slabs, sections, tubes and bars. The cutting is by hand feed. It works at amazingly high speeds so that a solid m. s. bar of 25 mm dia is cut in almost 20 seconds. 60 x 60 x 8mm section in 25 seconds and 75 mm. dia pipe in 30 seconds, the Drive to cut-off wheel is from a motor through a set of vee belts on the wheel spindle. Motor is positioned on a hinged platform with counter-balancing spring for easy operation. An adjustable depth stop prevents accidental damages to cut-off wheel and regulates depth of cut.

Hand operated Precision Notching machine cuts all shearable materials especially useful where box, chasis and panel blanks are to be made. Notches as large as 160 mm x 150 mm in 16 Swg. mild steel can be made at the corner or in any position along the edge of a sheet. Ease of operation makes possible production rates which offen rival those of power driven equipment. Powerfull action of notcher is obtained through use of a roller cam, minimum operator effort is needed. Notches larger and smaller than 90 can be made in two operations. Straight shearing job can be done, too. Two handles of different lengths are provided. Short handle for production speed on lighter materials; long handle for notching heavier materials. Blades : The machine is equipped with four blades to solve any notching problem. The upper blades are fixed while the lower one's can be adjusted. For smooth cutting 5% to 10'% shearing gap should be provided. The blades are made out of special alloy

steel. The bottom blades have 4 cutting edges which gives longer life.

Adjustment of Blades : The adjustment of blades (Lower) is carried out by the four hexagon screws, provided under the rectangular table. Feeler gauge should be used for accurate gap setting. The machine has been set for average size of material. Table : A perfectly flat mild steel table has been fixed for resting of sheet. Gauges : Suitable gauges fixed on the top of table, have been provided. The position can be changed according to requirement. For fixing them at appropriate place tapped holes have been provided. Operation : The sheet to be notched should be placed on the Tables.It must bs butted against the gauge blocks. Then the head is brought down manually and the shearing action takes place. Maintenance : For the easy movement of the notching head. it is necessary to lubricate the guideways and cam guides periodically.

STANDARD EQUIPMENT : Short handle for working with light materials. Long handle for notching heavier materials, Adjustable gauges and standard set of blades (fitted).

Cut-Off machines are versatile and cut nearly all materials in slabs, sections, tubes and bars. The cutting is by hand feed. It works at amazingly high speeds so that a solid m. s. bar of 25 mm dia is cut in almost 20 seconds. 60 x 60 x 8mm section in 25 seconds and 75 mm. dia pipe in 30 seconds, the Drive to cut-off wheel is from a motor through a set of vee belts on the wheel spindle. Motor is positioned on a hinged platform with counter-balancing spring for easy operation. An adjustable depth stop prevents accidental damages to cut-off wheel and regulates depth of cut. Cut-Off wheel spindle runs in pre-loaded bearings and is equipped with recessed flangs an adequate guard. Floor Stand Heavy gauge sheet metal fabricated is braced for rigidly. Firm bolting to foundation is necessary when machine is put into operation. The starter with convenient reach is flush mounted on one side of the stand. Coolant Pump An independently driven motorised with tank having sward partion, Coolant Pump An independently driven motorised with tank having sward partion, pipes and spout is an extra equipment.

lt may be used only when high speed steel circular saw blade is used. Coolant is not required when used with abrasive wheel. Quick Cutting operation yields good cutting surface. For cutting ferrous metals or hard materials, aluminium oxide wheels (of normal corundum) i.e., soft wheels are recommended. For non-ferrous or soft materials, silicon carbide cut-off .wheels or metal cutting saws are recommended. Reinforced cut-off wheels minimize accidental breakages, last longer than normal cut-off wheels and are safe to operate. The life of grinding wheel mostly depends on the amount of work, material, size, strength or hardness of material, its alloy components etc. The Clamping Vice-Head unit in both AMI-16 and AMI-12 is "Quick Action Type". In AMI-16 it is tubular in which the the screw is entirely protected from the abrasive dust and hence the wear & tear of the screw is almost nil.In AMI-12 the screw vice is cam-actuated to clamp the job instantly.

Standard Equipment : Machine with motor, starter and vice.

Optional Equipment :

Standard Equipment : Machine with motor, starter and vice.

Optional Equipment :