Write a Review
Our Products
We offer a complete product range of Roll Turning Lathe Machine, Vertical Turning, Heavy Duty Single Semi Automatic Lathe, Automatic Lathe and Semi Automatic Lathe Machine
standard accessories
|
|
|
CAPACITY |
|
|
|
|
|
|
|
ADMIT BEETWEN CENTER |
2000 3000 4000MM |
2000 3000 4000MM |
3000 4000 5000MM |
2000 3000 4000 5000MM |
3000 4000 5000 6000MM |
5000 6000 7000 |
|
BED WIDTH |
500 |
600 |
660 |
760 |
900 |
1050 |
|
CENTER HEIGHT |
450 |
500 |
600 |
700 |
800 |
925 |
|
SWING OVER BED |
900 |
1000 |
1200 |
1400 |
1600 |
1850 |
|
SWING OVER CARRIAGE |
500 |
650 |
800 |
850 |
900 |
1200 |
|
SWING OVER CROSS SADOLE |
450 |
600 |
800 |
850 |
1150 |
1350 |
|
SWING IN GAP |
1250 |
1300 |
1400 |
1650 |
1950 |
2200 |
|
SWING IN FRONT OF FACE PLATE |
225 |
250 |
250 |
250 |
250 |
250 |
|
HADE SToCK |
|
|
|
|
|
|
|
MAIN SPINOLE BORE |
100 |
100 |
105 |
105 |
105 |
125 |
|
MAIN SPINOLE NOSE |
TAPER NOSE/ THREADED |
TAPER NOSE/ THREADED |
TAPER NOSE/ THREADED |
TAPER NOSE/ THREADED |
TAPER NOSE/ THREADED |
TAPER NOSE/ THREADED |
|
MAIN SPINOLE |
MT-4 |
MT-5 |
MT-5 |
MT-5 |
MT-5 |
MT-5 |
|
NO OF SPEEDS |
18 |
18 |
18 |
18 |
18 |
18 |
|
SPEED RANGE |
15 To 450 RPM |
10 To 300 RPM |
8 To 250 RPM |
8 To 200 RPM |
4 To 100 RPM |
2 To 50 RPM |
|
TAIL SToCK |
|
|
|
|
|
|
|
TAIL SToCK QUILL DLA |
90 MM |
100 MM |
110 MM |
125 MM |
150 MM |
150 MM |
|
TAIL SToCK QUILL TRAVEL |
250 MM |
300 MM |
300 MM |
300 MM |
350 MM |
350 MM |
|
TAIL SToCK QUILL TAPER |
MT-4 |
MT-4 |
MT-5 |
MT-6 |
MT-6 |
MT-6 |
|
SLIDE & CARRIAGE |
||||||
|
CROSS SLIDE TRAVEL |
450 MM |
500 MM |
600 MM |
725 MM |
850 MM |
1000 MM |
|
ToP SLIDE TRAVEL |
200 MM |
200 MM |
250 MM |
250 MM |
250 MM |
250 MM |
|
MAX ToOL DEMESNSES |
35 x 35 MM |
40 x 40 |
40 x 40 |
40 x 40 |
45 x 45 |
50 x 50 |
|
STEADIES |
|
|
|
|
|
|
|
MAX MIN CAP OF FIX STEADY |
50 To 400 |
100 To |
100 To 550 |
150 To 650 |
150 To 750 |
300 To 900 |
|
MAX MIN TRAEVLLING STEADY |
20 To 100 |
20 To 100 |
20 To 100 |
20 To 100 |
20 To 100 |
20 To 100 |
|
MOTOER |
|
|
|
|
|
|
|
MAIN MOToR KW |
37 KW |
55 KW |
55 KW |
7.5 KW |
11 KW |
11KW |
|
OPITIONAL RAPID MOToER FOR SADDLE |
15 KW |
15 KW |
15 KW |
15 KW |
15 KW |
15 KW |
|
COOLANT PUMP MOTOER |
0.11 KW |
0.11 KW |
0.11 KW |
0.11 KW |
0.11 KW |
0.11 KW |
|
THERADS & FEEDS |
|
|
|
|
|
|
|
LONGITUIONAL FEEDS |
45 0.05 To 1.5 |
45 0.05 To 1.5 |
45 0.05 To 1.5 |
45 0.05 To 1.5 |
45 0.05 To 1.5 |
45 0.05 To 1.5 |
|
CHOSS FEEDS |
45 0.025 To 0.75 |
45 0.025 To 0.75 |
45 0.025 To 0.75 |
45 0.025 To 0.75 |
45 0.025 To 0.75 |
45 0.025 To 0.75 |
|
MEATRIC THERADS |
45 1 To 15 |
45 1 To 15 |
45 1 To 15 |
45 1 To 15 |
45 1 To 15 |
45 1 To 15 |
|
WITHWOURTH THREADS IN TPI |
45 60 To 2 |
45 60 To 2 |
45 60 To 2 |
45 60 To 2 |
45 60 To 2 |
45 60 To 2 |
|
MODULER THERADS |
45 0.25 To 7.5 |
45 0.25 To 7.5 |
45 0.25 To 7.5 |
45 0.25 To 7.5 |
45 0.25 To 7.5 |
45 0.25 To 7.5 |
|
DIAMENTRAL PITCH THERADS |
24 120 To 6 |
24 120 To 6 |
24 120 To 6 |
24 120 To 6 |
24 120 To 6 |
24 120 Tos 6 |
|
DIA OF LEAD SCREW |
55 MM |
60MM |
60MM |
60MM |
60MM |
60MM |
|
PITCH OF LEAD SCREW |
2TPI |
2TPI |
2TPI |
2TPI |
2TPI |
2TPI |
STANDARD ACCESSORIES :
SPECIAL ACCESSORIES :
| Model | AMI-600 | AMI-1000 | AMI-1500 | AMI-2000 | AMI-2500 | AMI-3000 | AMI-4000 |
| Size of Machine | 600 mm | 1000 mm | 1500 mm | 2000 mm | 2500 mm | 3000 mm | 4000 mm |
| Diameter of job table | 500 | 900 | 1300 | 1800 | 2300 | 2800 | 3800 |
| Max. Diameter Admit | 800 | 1050 | 1600 | 2200 | 2750 | 3250 | 4250 |
| Max. Height under Cross Rail | 400 | 600 | 1200 | 1500 | 1700 | 1800 | 2000 |
| 900 (optional) | |||||||
| Vertical travel of turret | 300 | 410 | 500 | 700 | 750 | 750 | 1000 |
| Table speeds (Nine) low Range | 32-66-120 | 3 To 120 RPM | 3 To 120 RPM | 0.75 To 30 RPM. | 1.5 To 100 RPM. | 1.5 TO 100 RPM. | 1.5 To 100 RPM. |
| high Range | 65-133-240 | ---- | ---- | ---- | ---- | ---- | ---- |
| Main Drive Motor | 2.2 Kw 2 speed | 3.7 Kw | 5.5 Kw | 11 Kw | 12 Kw | 15 Kw | 17.5 Kw |
| 700/1444 RPM | 1440 RPM | 1440 RPM | 1440 RPM | 1440 RPM | 1440 RPM | 1440 RPM | |
| Rapid Drive Motor | 1.1 KW 1400 RPM | 1.5 KW 1400 RPM | 1.5 KW 1440 RPM | 3.7 KW 1440 RPM | 5 KW 1440 RPM | 7.5 KW 1440 RPM | 10KW 1440 RPM |
| Cross Slide elevating motor | 1.5 Kw 1440 RPM | 1.5 Kw 1440 RPM | 2.2 KW 0.005 RPM | ---- | ---- | ---- | ---- |
| Three feed rate are available | 0.102 Per/min | 0.005/01/.015 | 0.025 to 1MM | To 40 Thou | ---- | ---- | ---- |
| for each Table Speed. | 0.227 Per / min | ---- | ---- | ---- | ---- | ---- | ---- |
| 0.425 Per / min | ---- | ---- | ---- | ---- | ---- | ---- | |
INTRODUCTION :Automats are extremely versatile machines that give big returns on small investments. Upto 80% of all turning jobs can be profitable handled by these automats with accuracy and precision. These Automats have proved economical for mass production of simple and complex turned parts for Automobiles, Bicycles, Tractors, Diesel Engines, Pumps, Radios and electronics, Sewing Machines, Aircraft and so on. The simple design of these Automats greatly reduces the time for change-over of tooling set-up from one components to another.
STANDARD EQUIPMENTS : Front & Rear Main Slides, Tailstock Barstop, One Collet With Drill Holder, Electric Drive Motor, Electric Coolant Pump, One Set of Cam Blanks, One Silent Gravity Bar Feed Chest, Trans-parent Splash Guard, Change Gears.
ADDITIONAL ACCESSORIES : (AT EXTRA COST) : Single Vertical Slide, Double Vertical Slide, Long Turning Attachment (Front & Rear), Various Types of Tool Holders, Finished Cams, Collets Chamfering Attachment, Tooling and Setting.
| MODEL NO | ALP - 25 | ALP - 32 | ALP - 42 | ALP - 60 |
| MAX. CAPACITY ROUND BAR | 25 mm | 32 mm | 42 mm | 60 mm |
| HEXAGONAL | 22 mm AF | 25 mm AF | 36 mm AF | 52 mm AF |
| SQUARE | 18 mm | 22 mm | 29 mm | 42 mm |
| MAX. TURNING LENGTH WITH LONG TURNING ATACHMENT |
60 mm | 70 mm | 80 mm | 90 mm |
| MAXIMUM DRILL | 40 mm | 50 mm | 75 mm | 90 mm |
| SPINDLE SPEED | (6) 690 to 2160 | (6) 690 to 2160 | (6) 440 to 1350 | (3) 440 to 950 |
| PRODUCTION RATE IN PIECES PER HOUR | 22 to 800 | 22 to 800 | 14 to 530 | 14 to 530 |
| ELECTRIC DRIVE MOTOR 3 PHASE | 2 HP 1440 RPM | 3 HP 1440 RPM | 5 HP 960 RPM | 5 HP 960 RPM |
Automats are extremely versatile machines that give big returns on small investments. Upto 80% of all turning jobs can be profitable handled by these automats with accuracy and precision. These Automats have proved economical for mass production of simple and complex turned parts for Automobiles, Bicycles, Tractors, Diesel Engines, Pumps, Radios and electronics, Sewing Machines, Aircraft and so on. The simple design of these Automats greatly reduces the time for change-over of tooling set-up from one components to another. Front & Rear Main Slides, Tailstock Barstop, One Collet With Drill Holder, Electric Drive Motor, Electric Coolant Pump, One Set of Cam Blanks, One Silent Gravity Bar Feed Chest, Trans-parent Splash Guard, Change Gears.
| STANDARD EQUIPMENT :
| EXTRA EQUIPMENT :
|
|
standard equipments :front slide, drill slide, one vertical. Front slide, stop bar, one collet. One drill holding plunger with collet. Electric drive motor coolant pump, electricals. One set of cams, bar feed. One set of tool holders. additional accessories : (at extra cost)rear front slide, long turning attachment (front & rear), double drilling attachment 3. Speed counter for spindle speeds, feed change gear box with 36 feeds. Various type of tool holders, cams, collets chamfering tool holder, knee tool holder.
| MODEL NO. | AL-50 | AL-60 |
| Max. Capacity Round Bar | 50 mm | 60 mm |
| Hexagonal | 42 mm AF | 52 mm AF |
| Square | 36 mm | 42 mm |
| Max. Turning Length with Long Turning Attachment | 75 mm | 90 mm |
| Maximum Drill | 75 mm | 90 mm |
| Spindle Speed | 1 | 1 |
| Feed | 1 | 1 |
| Electric Drive Motor 3 Phase | 5 HP 960 RPM | 5 HP 960 RPM |
| DISC : | ||
| Facing Capacity on diameter Max. | mm | 458 |
| Facing capacity on width Max. | mm | 45 |
| Total travel of the tool (cross wise) | mm | 140 |
| Number of automatic cross feeds | ||
| available (for roughing & finis~iing) | 2 | |
| DRUM : | ||
| Drum skimming capacity on dia | mm | 152.4 to 660.4 |
| Maximum tool slide travel | mm | 205 |
| Each division of cross slide micrometer takes a cut of |
||
| per side | mm | 0.025 |
| on dia. | mm | 0.05 rpm |
| Spindle Speeds | mm | 120/80/54 |
| Self feed travel/minute | mm | 24/16/10.8 |
| GENERAL : | ||
| Main Motor | HP | 1 |
| Weight of the machine (appx.) | Kgs | 460 |
| Shipping size in L x B x H (appx.) | cm | 170 x 92 x 76 |
Atlas Machines (India) (Atlas Machines India)
20, AMBALAL DOHI MARG, (HAMMAM ST.), FORT,, MUMBAI, Maharashtra, India
Share us via
