Our Products
Dwyer A3000-50CM Photohelic Pressure Switch Gauge Range 0-50 cm w.c.
Dwyer A3000-50CM Photohelic Pressure Switch/Gauge (0-50cm w.c.)
Model: A3000-50CM
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-50CM Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-50CM Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F(75C)copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F(21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
dwyer a3205 photohelic pressure switch gauge range 0-5 psi
dwyer a3205 photohelic pressure switch/gauge (0-5 psi)
model: a3205
bezel and front cover (with set point knobs and zero adjustment screw) removed to expose photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
dwyer a3205 offers
features
measure 4 to 20 ma signals without "breaking the loop"
measure ma signals for plc and control system analog i/o
dual backlit display with both ma measurement and percent of 4 to 20 ma span
measurement spotlight illuminates hard to see wires in dark enclosures
detachable clamp with extension cable for measurements in tight locations
measure 10 to 50 ma signals in older control systems using the 99.9 ma range
automatically change the 4 to 20 ma output for remote testing
power saving features, auto-off, backlight timeout extend battery life
hold function captures and displays changing measurements
applications
air conditioner systems
clean rooms
fume exhaust systems
dwyer a3205 specifications
switch specifications
switch type:each set point has 2 form c relays (dpdt)
repeatability:1% of fs
electrical rating:10 a at 28 vdc, 10 a at 120, 240 vac
electrical connections:screw terminals. Use 167f (75c) copper conductors only
power requirements:120 vac, 50/60 hz, 240 vac and 24 vac power optional
mounting orientation:diaphragm in vertical position. Consult factory for other position orientations
set point adjustment:adjustable knobs on face
agency approvals:ce, csa, ul
gauge specifications
service:air and non-combustible, compatible gases
accuracy:2% of fs at 70f (21.1c), 3% on -0, 4% on -00 models
pressure limits:-20" hg to 25 psig (-0.677 to 1.72 bar), mp option; 35 psig (2.41 bar), hp option; 80 psig (5.52 bar)
temperature limits:20 to 120f. (-6.67 to 48.9c), -20 to 120f (-28 to 48.9c) with low temperature option
process connections:? female npt
dimensions:4" (101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Dwyer A3000-125PA Photohelic Pressure Switch Gauge Range 0-125 Pa.
Dwyer A3000-125PA Photohelic Pressure Switch/Gauge (0-125 Pa)
Model: A3000-125PA
Bezel and Front Cover (With Set Point Knobs And Zero Adjustment Screw) Removed To Expose Photohelic Switch/Gage Set Point Mechanism. Gage Pointer And Light Shutter Are Mounted On Helix And Balancing Counter Weight.
Dwyer A3000-125PA Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Specifications
GAGE SPECIFICATIONS
Service:Air and Non-Combustible, Compatible Gases.
Wetted Materials:Consult Factory.
Accuracy:2% of FS at 70F (21.1C).3% on -0 and 4% on -00 models.
Pressure Limits:-20" Hg.to 25 psig (-0.677 to 1.72 bar).MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Temperature Limits:20 to 120F.(-6.67 to 48.9C).-20 to 120F (-28 to 48.9C) with low temperature option.
Process Connections:1/8" female NPT.
Size:4" (101.6 mm) dial face, 5"(127 mm) O.D.x 8-1/4"(209.55 mm).
Weight:4 lb (1.81 kg).
SWITCH SPECIFICATIONS
Switch Type:Each setpoint has 2 Form C relays (DPDT).
Repeatability:1% of FS.
Electrical Rating:10 A @ 28 VDC, 10 A @ 120, 240 VAC.
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only.
Power Requirements:120 VAC, 50/60 Hz; 240 VAC & 24 VAC power optional.
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.
Set Point Adjustment:Adjustable knobs on face.
Agency Approvals:CE, CSA, UL.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-1KPA Photohelic Pressure Switch Gauge Range 0-1 kPa.
Dwyer Instruments A3000-1KPA
Photohelic Pressure Switch/Gage Range 0-1 kPa.
Order : A3000-1KPA
Mfg : A3000-1KPA
Photohelic Switch/Gages Function as Versatile, Highly Repeatable Pressure Switches Combined with a Precise Pressure Gage employing the time-Proven Magnehelic Gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Availability: Item ships in about Ships in 4-6 weeks
Product Highlights
Range: 0-1 kPa.
Gage Specifications
Service:Air and non-combustible, compatible gases
Range:0-1 kPa.
Accuracy:2% of FS at 70F (21.1C)
Pressure Limits:-20" Hg.to 25 psig (-0.677 to 1.72 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C)
Process Connections:1/8" female NPT
Size:4" (101.6 mm) dial face, 5"(127 mm) O.D. x 8-1/4"(209.55 mm)
Weight:4 lb (1.81 kg)
Switch Specifications
Switch Type:Each setpoint has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10A @ 28 VDC, 10A @ 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F(75C) copper conductors only
Power Requirements:120 VAC, 60 Hz
Mounting Orientation:Diaphragm in vertical position
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-1.5KPA Photohelic Pressure Switch/Gauge (0-1.5 kPa)
Model: A3000-1.5KPA
Bezel and Front Cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-1.5KPA Series A3000 Photohelic Pressure Switch Range 0 to 1 5 kPa
The Dwyer A3000-1.5KPA has a Range From 0-1.5 kPA.
Photohelic Switch/Gauges Function as versatile, highly repeatable Pressure Switches combined with a precise pressure gauge employing the time-proven Magnehelic gauge design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gauge face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gauge reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Photohelic Sensing - How It Works
In typical applications, these Dwyer Switch/Gages control between high and low pressure set points.When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation.
Relay-Transformer Features
A plastic housing protects all electronic components.Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.
Specifications
GAGE SPECIFICATIONS
Service:Air and non-combustible, compatible gases.
Wetted Materials:Consult Factory.
Accuracy:2% of FS at 70F (21.1C). 3% on -0 and 4% on -00 models.
Pressure Limits:-20" Hg. to 25 psig (-0.677 to 1.72 bar).MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar).
Temperature Limits:20 to 120F.(-6.67 to 48.9C).-20 to 120F (-28 to 48.9C) with low temperature option.
Process Connections:1/8" female NPT.
Size:4" (101.6 mm) dial face, 5" (127 mm) O.D. x 8-1/4"(209.55 mm).
Weight:4 lb (1.81 kg).
SWITCH SPECIFICATIONS
Switch Type:Each setpoint has 2 Form C relays (DPDT).
Repeatability:1% of FS.
Electrical Rating:10 A @ 28 VDC, 10 A @ 120, 240 VAC.
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only.
Power Requirements:120 VAC, 50/60 Hz;240 VAC & 24 VAC power optional.
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.
Set Point Adjustment:Adjustable knobs on face.
Agency Approvals:CE, CSA, UL.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3300-20MM Photohelic Pressure Switch Gauge Range 10-0-10 mm w.c.
Dwyer A3300-20MM Photohelic Pressure Gauge (10-0-10 mm w.c.)
Model: A3300-20MM
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism.Cover is Clear Polycarbonate Plastic.Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3300-20MM Offers
Features
Measure 4 to 20 mA Signals Without "Breaking the Loop"
Measure mA Signals For PLC and Control System Analog I/O
Dual Backlit Display With Both mA Measurement And Percent of 4 to 20 mA Span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3300-20MM Specifications
Switch Specifications
Switch Type:Each Set Point Has 2 Form C Relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) Copper Conductors Only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4" (101.6 mm)dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3000-80MM Photohelic Pressure Switch Gauge Range 0-80 mm w.c
Dwyer A3000-80MM Photohelic Pressure Switch/Gauge (0-80mm w.c.)
Model: A3000-80MM
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-80MM Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-80MM Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F(75C)copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F(21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3000-30KPA Photohelic Pressure Switch Gauge Range 0-30 kPa.
Dwyer A3000-30KPA Photohelic Pressure Switch/Gauge (0-30 kPa)
Model: A3000-30KPA
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-30KPA Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-30KPA Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-10KPA Photohelic Pressure Switch Gauge Range 0-10 kPa.
Dwyer Instruments A3000-10KPA
Photohelic Pressure Switch/Gage Range 0-10 kPa.
Order #: A3000-10KPA
Mfg #: A3000-10KPA
PhotohelicSwitch/Gages Function as Versatile, Highly Repeatable Pressure Switches Combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar);single positive pressure to 6000 psig (413 bar).
Availability: Item ships in about Ships in 4-6 weeks
Product Highlights
Range 0-10 kPa
Specifications
GAGE SPECIFICATIONS
Service:Air and Non-Combustible, Compatible Gases.
Wetted: Materials:Consult Factory.
Accuracy:2% of FS at 70F (21.1C).3% on -0 and 4% on -00 models.
Pressure Limits:-20" Hg. to 25 psig (-0.677 to 1.72 bar).MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Temperature Limits:20 to 120F.(-6.67 to 48.9C).-20 to 120F (-28 to 48.9C) with low temperature option.
Process Connections:1/8" female NPT.
Size:4"(101.6 mm) dial face, 5"(127 mm) O.D.x 8-1/4"(209.55 mm).
Weight:4 lb (1.81 kg).
SWITCH SPECIFICATIONS
Switch Type:Each setpoint has 2 Form C relays (DPDT).
Repeatability:1% of FS.
Electrical Rating:10 A @ 28 VDC, 10 A @ 120, 240 VAC.
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only.
Power Requirements:120 VAC, 50/60 Hz;240 VAC & 24 VAC power optional.
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations.
Set Point Adjustment:Adjustable knobs on face.
Agency Approvals:CE, CSA, UL.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-25MM Photohelic Pressure Switch/Gauge (0-25mm w.c.)
Model: A3000-25MM
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelicswitch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-25MM Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-25MM Offers Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C)with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm)dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3000-8KPA Photohelic Pressure Switch Gauge Range 0-8 kPa.
Dwyer A3000-8KPA Photohelic Pressure Switch/Gauge (0-8 kPa)
Model: A3000-8KPA
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-8KPA Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-8KPA Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3301 Photohelic Pressure Switch Gauge Range .5-0-.5 Inch w.c.
Dwyer A3301 Photohelic Pressure Switch/Gauge (.5-0-.5 Inch w.c.)
Model: A3301
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism. Cover is Clear Polycarbonate Plastic.Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3301
Features
Measure 4 to 20 mA Signals Without "Breaking the Loop"
Measure mA Signals For PLC and Control System Analog I/O
Dual Backlit Display With Both mA Measurement And Percent of 4 to 20 mA Span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3301 Specifications
Switch Specifications
Switch Type:Each Set Point Has 2 Form C Relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw Terminals. Use 167F (75C) Copper Conductors Only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in Vertical Position. Consult Factory For Other Position Orientations
Set Point Adjustment:Adjustable Knobs On Face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4" (101.6 mm) Dial Face, 5 x 8"(127 x 209.55 MM)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Series A3000 Photohelic Pressure Switch/Gage
3-in-1 Indicating Gage, Lo-limit and Hi-limit Control
The Series A3000 Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25 in (0-6 mm) w.c. up to 30 psi (21 bar).
Product Applications
Air Conditioning Systems
Clean Rooms
Fume Exhaust Systems
Specifications
GAGE SPECIFICATIONS
Service:Air and non-combustible, compatible gases.
Wetted Materials:Consult Factory.
Accuracy:2% of FS at 70F (21.1C).3% on -0 and 4% on -00 models.
Pressure Limits:-20" Hg. to 25 psig (-0.677 to 1.72 bar). MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Temperature Limits:20 to 120F.(-6.67 to 48.9C). -20 to 120F (-28 to 48.9C) with low temperature option.
Process Connections:1/8" female NPT.
Size:4"(101.6 mm) dial face, 5" (127 mm) O.D. x 8-1/4" (209.55 mm).
Weight:4lb (1.81 kg).
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : Websites : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpeng
Dwyer A3008 Photohelic Pressure Switch Gauge Range 0-8.0 Inch w.c.
Dwyer A3008 Photohelic Pressure Switch/Gauge (0-8.0"w.c.)
Model: A3008
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic.Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3008 PRESSURE SWITCH GAUGE, 0-8 in WC CSA
Measure 4 to 20 mA signals without breaking the loop
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving Features, auto-off, backlight timeout extend battery life
Dwyer A3008 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections: female NPT
Dimensions:4" (101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3150 Photohelic Pressure Switch Gauge Range 0-150 Inch w.c.
Dwyer A3150 Photohelic Pressure Switch/Gauge (0-150"w.c.)
Model: A3150
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point mechanism. Cover is clear polycarbonate plastic.Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3150 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3150 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3204 Photohelic Pressure Switch Gauge Range 0-4 psi
Dwyer A3204 Photohelic Pressure Switch/Gauge (0-4 psi)
Model: A3204
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3204 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3204 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections: female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpengineersindia
Dwyer A3040 Photohelic Pressure Switch Gauge Range 0-40 Inch w.c.
Dwyer A3040 Photohelic Pressure Switch/Gauge (0-40"w.c.)
Model: A3040
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3040 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3040 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4" (101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpengineersindia
Dwyer A3080 Photohelic Pressure Switch Gauge Range 0-80 Inch w.c.
Dwyer A3080 Photohelic Pressure Switch/Gauge (0-80"w.c.)
Model: A3080
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3080 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3080 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3002 Photohelic Pressure Switch Gauge Range 0-2.0 Inch w.c.
Dwyer A3002 Photohelic Pressure Switch/Gauge (0-2.0"w.c.)
Model: A3002
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counter Weight.
MORE ABOUT THIS ITEM
The Photohelic Switch/Gauge functions as versatile, highly repeatable pressure switches combined with a precise pressure gauge employing the time-proven Magnehelic gauge design. The Photohelic switch/gauge measures and controls positive, negative or differential pressures of air and compatible gases. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust setpoint indicators are controlled by knobs located on the gauge face. Individual setpoint deadband is one pointer width - less than 1% of full scale. Setpoints can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gauge reading is continuous and unaffected by switch operation, even during loss of electrical power. In typical applications, these switch/gauges control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation. A plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.
Photohelic switch/gauges are used to control pressures in air conditioning systems, clean rooms, fluidic and pneumatic control systems, materials handling equipment, alarm or control fume exhaust systems, control pressure in air structures, and monitor respiratory and blood pressures.
Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.
Dwyer A3002 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections: female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3010 Photohelic Pressure Switch Gauge Range 0-10 Inch w.c.
Dwyer A3010 Photohelic Pressure Switch/Gauge (0-10"w.c.)
Model: A3010
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3010 Pressure switch/gage, range 0-10
The Dwyer A3010 Pressure Switch/Gauge has a range of 0-8" w.c.
Photohelic Switch/Gauges function as versatile, highly repeatable pressure switches combined with a precise pressure gauge employing the time-proven Magnehelic gauge design.The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gauge face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gauge reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm)w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Photohelic Sensing - How It Works
In typical applications, these Dwyer switch/gages control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation.
Relay-Transformer Features
A plastic housing protects all electronic components.Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.
Dwyer A3010 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections: female NPT
Dimensions:4" (101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-100CM Photohelic Pressure Switch Gauge Range 0-100 cm w.c.
Dwyer Instruments A3000-100CM
Photohelic Pressure Switch/Gage Range 0-100 cm w.c
Photohelic Switch/Gages function as versatile, Highly Repeatable Pressure Switches combined with a precise Pressure Gage employing the time-proven Magnehelic Gage Design. The Photohelic switch/Gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Availability: Item ships in about Ships in 4-6 weeks
Product Highlights
Range 0-100 cm w.c.
Specifications
GAGE SPECIFICATIONS
Service:Air and non-combustible, compatible gases.
Wetted Materials:Consult Factory.
Accuracy:2% of FS at 70F (21.1C).3% on -0 and 4% on -00 models.
Pressure Limits:-20" Hg.to 25 psig (-0.677 to 1.72 bar).MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Temperature Limits:20 to 120F.(-6.67 to 48.9C).-20 to 120F (-28 to 48.9C) with low temperature option.
Process Connections:1/8" female NPT.
Size:4"(101.6 mm) dial face, 5"(127 mm) O.D. x 8-1/4"(209.55 mm).
Weight:4lb (1.81 kg).
SWITCH SPECIFICATIONS
Switch Type:Each setpoint has 2 Form C relays (DPDT).
Repeatability:1% of FS.
Electrical Rating:10 A @ 28 VDC, 10 A @ 120, 240 VAC.
Electrical Connections:Screw terminals.
Use 167F (75C) copper conductors only.
Power Requirements:120 VAC, 50/60 Hz; 240 VAC & 24 VAC power optional.
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations.
Set Point Adjustment:Adjustable knobs on face.
Agency Approvals:CE, CSA, UL.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3220 Photohelic Pressure Switch Gauge Range 0-20 psi
Dwyer A3220 Photohelic Pressure Switch/Gauge (0-20 psi)
Model: A3220
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3220 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3220 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4" (101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpengineersindia
Dwyer A3300-500PA Photohelic Pressure Switch Gauge Range 250-0-250 Pa.
Dwyer A3300-500PA Photohelic Pressure Switch/Gauge (250-0-250 Pa.)
Model: A3300-500PA
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism. Cover is Clear Polycarbonate Plastic.Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3300-500PA
Features
Measure 4 to 20 mA Signals Without "Breaking the Loop"
Measure mA Signals For PLC and Control System Analog I/O
Dual Backlit Display With Both mA Measurement And Percent of 4 to 20 mA Span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3300-500PA Specifications
Switch Specifications
Switch Type:Each Set Point Has 2 Form C Relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw Terminals.Use 167F (75C) Copper Conductors Only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in Vertical Position. Consult Factory For Other Position Orientations
Set Point Adjustment:Adjustable Knobs On Face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) Dial Face, 5 x 8"(127 x 209.55 MM)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3304 Photohelic Pressure Switch Gauge Range 2-0-2 Inch w.c.
Dwyer A3304 Photohelic Pressure Switch/Gauge (2-0-2 Inch w.c.)
Model: A3304
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism. Cover is Clear Polycarbonate Plastic. Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3304
Features
Measure 4 to 20 mA Signals Without "Breaking the Loop"
Measure mA Signals For PLC and Control System Analog I/O
Dual Backlit Display With Both mA Measurement And Percent of 4 to 20 mA Span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3304 Specifications
Switch Specifications
Switch Type:Each Set Point Has 2 Form C Relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw Terminals. Use 167F (75C) Copper Conductors Only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in Vertical Position. Consult Factory For Other Position Orientations
Set Point Adjustment:Adjustable Knobs On Face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4" (101.6 mm) Dial Face, 5 x 8" (127 x 209.55 MM)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3210 Photohelic Pressure Switch Gauge Range 0-10 psi
Dwyer A3210 Photohelic Pressure Switch/Gauge (0-10 psi)
Model: A3210
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3210 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3210 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4"(101.6 mm)dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpengineersindia
Dwyer A3000-300CM Photohelic Pressure Switch/Gauge (0-300cm w.c.)
Model: A3000-300CM
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-300CM Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-300CM Offers Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability: 1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy: 2% of FS at 70 F (21.1 C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120 F. (-6.67 to 48.9 C), -20 to 120F (-28 to 48.9 C) with low temperature option
Process Connections: female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3000-200CM Photohelic Pressure Switch Gauge Range 0-200 cm w.c.
Photohelic Pressure Switch/Gage Range 0-200 cm w.c.
Order : A3000-200CM
Mfg : A3000-200CM
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-200CM Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-200CM Offers Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability: 1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy: 2% of FS at 70 F (21.1 C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120 F. (-6.67 to 48.9 C), -20 to 120F (-28 to 48.9 C) with low temperature option
Process Connections: female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3203 Photohelic Pressure Switch Gauge Range 0-3 psi
Dwyer A3203 Photohelic Pressure Switch/Gauge (0-3 psi)
Model: A3203
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3203 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3203 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4lb(1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Dwyer A3300-1KPA Photohelic Pressure Switch Gauge Range .5-0-.5 kPa.
Dwyer A3300-1KPA Photohelic Pressure Switch/Gauge (.5-0-.5 kPa.)
Model: A3300-1KPA
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism. Cover is Clear Polycarbonate Plastic. Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3300-1KPA Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3300-1KPA Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4" (101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-3KPA Photohelic Pressure Switch Gauge Range 0-3 kPa.
Dwyer A3000-3KPA Photohelic Pressure Switch/Gauge (0-3 kPa)
Model: A3000-3KPA
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-3KPA Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-3KPA Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig(-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) With Low Temperature Option
Process Connections:Female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3100 Photohelic Pressure Switch Gauge Range 0-100 Inch w.c.
Dwyer A3100 Photohelic Pressure Switch/Gauge (0-100"w.c.)
Model: A3100
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3100 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3100 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-10MM Photohelic Pressure Switch Gauge Range 0-10 mm w.c.
Dwyer Instruments A3000-10MM
Photohelic Pressure Switch/Gage Range 0-10 mm w.c.
Order #: A3000-10MM
Mfg #: A3000-10MM
Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Availability: Item ships in about Ships in 4-6 weeks
Product Highlights
Range 0-10 mm w.c.
Specifications
GAGE SPECIFICATIONS
Service:Air and Non-Combustible, Compatible Gases.
Wetted Materials:Consult Factory.
Accuracy:2% of FS at 70F (21.1C).3% on -0 and 4% on -00 models.
Pressure Limits:-20" Hg. to 25 psig (-0.677 to 1.72 bar). MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Temperature Limits:20 to 120F. (-6.67 to 48.9C).-20 to 120F (-28 to 48.9C) with low temperature option.
Process Connections:1/8"female NPT.
Size:4"(101.6 mm) dial face, 5"(127 mm)O.D. x 8-1/4"(209.55 mm).
Weight:4 lb (1.81 kg).
SWITCH SPECIFICATIONS
Switch Type:Each setpoint has 2 Form C relays (DPDT).
Repeatability:1% of FS.
Electrical Rating:10 A @ 28 VDC, 10 A @ 120, 240 VAC.
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only.
Power Requirements:120 VAC, 50/60 Hz;240 VAC & 24 VAC power optional.
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations.
Set Point Adjustment:Adjustable knobs on face.
Agency Approvals:CE, CSA, UL.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3310 Photohelic Pressure Switch Gauge Range 5-0-5 Inch w.c.
Dwyer A3310 Photohelic Pressure Switch/Gauge (5-0-5 Inch w.c.)
Model: A3310
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism. Cover is Clear Polycarbonate Plastic. Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3310
Features
Measure 4 to 20 mA Signals Without "Breaking the Loop"
Measure mA Signals For PLC and Control System Analog I/O
Dual Backlit Display With Both mA Measurement And Percent of 4 to 20 mA Span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3310 Specifications
Switch Specifications
Switch Type:Each Set Point Has 2 Form C Relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw Terminals.Use 167F (75C) Copper Conductors Only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in Vertical Position. Consult Factory For Other Position Orientations
Set Point Adjustment:Adjustable Knobs On Face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4"(101.6 mm) Dial Face, 5 x 8" (127 x 209.55 MM)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Weel
Dwyer A3003 Photohelic Pressure Switch Gauge Range 0-3.0 Inch w.c.
Dwyer A3003 Photohelic Pressure Switch/Gauge (0-3.0"w.c.)
Model: A3003
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3003 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3003 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3000-25KPA Photohelic Pressure Switch/Gauge (0-25 kPa)
Model: A3000-25KPA
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-25KPA Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-25KPA Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals. Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C)with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm)dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-250CM Photohelic Pressure Switch Gauge Range 0-250 cm w.c.
Dwyer Instruments A3000-250CM
Photohelic Pressure Switch/Gage Range 0-250 cm w.c.
Order #: A3000-250CM
Mfg #: A3000-250CM
PhotohelicSwitch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Product Highlights
Range: 0-250 cm w.c.
Dwyer A3000-250CM Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.
67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-15KPA Photohelic Pressure Switch Gauge Range 0-15 kPa.
Dwyer Instruments: A3000-15KPA
Photohelic Pressure Switch/Gage Range 0-15 kPa.
Order: A3000-15KPA
Mfg: A3000-15KPA
Photohelic Switch/Gages Function as versatile, highly repeatable Pressure Switches combined with a precise Pressure Gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Availability: Item ships in about Ships in 4-6 weeks
Product Highlights
Range: 0-15 kPa.
Gage Specifications
Service:Air and non-combustible, compatible gases
Range:0-150 cm w.c.
Accuracy:2% of FS at 70F (21.1C)
Pressure Limits:-20" Hg.to 25 psig (-0.677 to 1.72 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C)
Process Connections:1/8" female NPT
Size:4" (101.6 mm) dial face, 5" (127 mm) O.D. x 8-1/4" (209.55 mm)
Weight:4lb (1.81 kg)
Switch Specifications
Switch Type:Each setpoint has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10A @ 28 VDC, 10A @ 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F(75C) copper conductors only
Power Requirements:120 VAC, 60 Hz
Mounting Orientation:Diaphragm in vertical position
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3000-00 Photohelic Pressure Switch Gauge Range 0-.25 Inch w.c./300-2000 FPM
Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Availability: Item ships in about Ships in 4-6 Weeks
Dwyer A3000-00AV Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-00AV Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability: 1% of FS
Electrical Rating:10 A at 28 VDC 10 A at 120 240 VAC
Electrical Connections:Screw terminals. Use 167 F (75 C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals :CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70 F (21.1 C)3% on -04% on -00 models
Pressure Limits : -20" Hg to 25 psig (-0.677 to 1.72 bar)
MP option; 35 psig (2.41 bar)
HP option; 80 psig (5.52 bar)
Temperature Limits :20 to 120 F.(-6.67 to 48.9C)-20 to 120 F (-28 to 48.9C) with low temperature option
Process Connections : female NPT
Dimensions :4" (101.6 mm) dial face 5 x 8 " (127 x 209.55 mm)
Weight :4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Dwyer Series A3000-0 Photohelic Pressure Switch Gage 0-.50" w.c.
Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Availability: Item ships in about Ships in 4-6 Weeks
Dwyer A3000-0 0-.50" w.c.
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-0 0-.50" w.c.
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability: 1% of FS
Electrical Rating:10 A at 28 VDC 10 A at 120 240 VAC
Electrical Connections:Screw terminals. Use 167 F (75 C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals :CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70 F (21.1 C)3% on -04% on -00 models
Pressure Limits : -20" Hg to 25 psig (-0.677 to 1.72 bar)
MP option; 35 psig (2.41 bar)
HP option; 80 psig (5.52 bar)
Temperature Limits :20 to 120 F.(-6.67 to 48.9C)-20 to 120 F (-28 to 48.9C) with low temperature option
Process Connections : female NPT
Dimensions :4" (101.6 mm) dial face 5 x 8 " (127 x 209.55 mm)
Weight :4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Dwyer A3000-750PA Photohelic Pressure Switch Gauge Range 0-750 Pa.
Dwyer A3000-750PA-240VAC Photohelic Pressure Switch/Gauge (0-750 Pa), 220/240 VAC Relay Pack
Model: A3000-750PA-240VAC
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic.Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-750PA-240VAC Series A3000 Photohelic Pressure Switch 0 to 750 Pa
The Dwyer A3000-750PA-240VAC has a range from 0-750 Pa and 220/240 VAC Relay Pack.
Photohelic Switch/Gauges function as versatile, highly repeatable pressure switches combined with a precise pressure gauge employing the time-proven Magnehelic gauge design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gauge face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gauge reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c.up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Photohelic Sensing - How It Works
In typical applications, these Dwyer switch/gages control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation.
Relay-Transformer Features
A plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.
Dwyer A3000-750PA Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-20CM Photohelic Pressure Switch Gauge Range 0-20 cm w.c.
Photohelic Pressure Switch/Gage Range 0-20 cm w.c.
Order : A3000-20CM
Mfg : A3000-20CM
Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic Gage design. The Photohelic Switch/Gage measures and controls positive, negative or Differential Pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Availability: Item ships in about Ships in 4-6 weeks
Product Highlights
Range: 0-20 cm w.c.
Gage Specifications
Service:Air and non-combustible, compatible gases
Range: 0-200 cm w.c.
Accuracy:2% of FS at 70F (21.1C)
Pressure Limits:-20" Hg. to 25 psig (-0.677 to 1.72 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C)
Process Connections:1/8" female NPT
Size:4" (101.6 mm) dial face, 5" (127 mm) O.D.x 8-1/4" (209.55 mm)
Weight:4 lb (1.81 kg)
Switch Specifications
Switch Type:Each setpoint has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10A @ 28 VDC, 10A @ 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 60 Hz
Mounting Orientation:Diaphragm in vertical position
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3300-3KPA Photohelic Pressure Switch Gauge Range 1.5-0-1.5 kPa.
Dwyer A3300-3KPA Photohelic Pressure Switch/Gauge (1.5-0-1.5 kPa.)
Model: A3300-3KPA
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism. Cover is Clear Polycarbonate Plastic. Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3300-3KPA
Features
Measure 4 to 20 mA Signals Without "Breaking the Loop"
Measure mA Signals For PLC and Control System Analog I/O
Dual Backlit Display With Both mA Measurement And Percent of 4 to 20 mA Span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3300-3KPA Specifications
Switch Specifications
Switch Type:Each Set Point Has 2 Form C Relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw Terminals.Use 167F (75C) Copper Conductors Only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in Vertical Position. Consult Factory For Other Position Orientations
Set Point Adjustment:Adjustable Knobs On Face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4"(101.6 mm) Dial Face, 5 x 8"(127 x 209.55 MM)
Weight:4 lb(1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3004 Photohelic Pressure Switch Gauge Range 0-4.0 Inch w.c.
Dwyer A3004 Photohelic Pressure Switch/Gauge (0-4.0"w.c.)
Model: A3004
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3004 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3004 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position.Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4" (101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-60PA Photohelic Pressure Switch Gauge Range 0-60 Pa.
Dwyer A3000-60PA-240VAC Photohelic Pressure Switch/Gauge (0-60 Pa), 220/240 VAC Relay Pack
Model: A3000-60PA-240VAC
Bezel and Front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-60PA-240VAC Series A3000 Photohelic Pressure Switch 0 to 60 PA
The Dwyer A3000-60PA-240VAC has a range from 0-60 Pa and 220/240 VAC Relay Pack.
Photohelic Switch/Gauges function as versatile, highly repeatable pressure switches combined with a precise pressure gauge employing the time-proven Magnehelic gauge design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gauge face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gauge reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25"(0-6 mm) w.c.up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).
Photohelic Sensing - How It Works
In typical applications, these Dwyer switch/gages control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation.
Relay-Transformer Features
A plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.
Dwyer A3000-60PA Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F(75C)copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F(21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3320 Photohelic Pressure Switch Gauge Range 10-0-10 Inch w.c.
Dwyer A3320 Photohelic Pressure Switch/Gauge (10-0-10 Inch w.c.)
Model: A3320
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism. Cover is Clear Polycarbonate Plastic.Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3320
Features
Measure 4 to 20 mA Signals Without "Breaking the Loop"
Measure mA Signals For PLC and Control System Analog I/O
Dual Backlit Display With Both mA Measurement And Percent of 4 to 20 mA Span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3320 Specifications
Switch Specifications
Switch Type:Each Set Point Has 2 Form C Relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw Terminals.Use 167F (75C) Copper Conductors Only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in Vertical Position. Consult Factory For Other Position Orientations
Set Point Adjustment:Adjustable Knobs On Face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4" (101.6 mm) Dial Face, 5 x 8"(127 x 209.55 MM)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3302 Photohelic Pressure Switch Gauge Range 1-0-1 Inch w.c.
Dwyer A3302 Photohelic Pressure Switch/Gauge (1-0-1 Inch w.c.)
Model: A3302
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic Switch/Gage set point
Mechanism.Cover is Clear Polycarbonate Plastic.Gage Pointer and Light Shutter Are Mounted on Helix and Balancing
Counterweight.
Dwyer A3302
Features
Measure 4 to 20 mA Signals Without "Breaking the Loop"
Measure mA Signals For PLC and Control System Analog I/O
Dual Backlit Display With Both mA Measurement And Percent of 4 to 20 mA Span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3302 Specifications
Switch Specifications
Switch Type:Each Set Point Has 2 Form C Relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw Terminals.Use 167F (75C) Copper Conductors Only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in Vertical Position. Consult Factory For Other Position Orientations
Set Point Adjustment:Adjustable Knobs On Face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air And Non Combustible, Compatible Gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig (-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4"(101.6 mm) Dial Face, 5 x 8" (127 x 209.55 MM)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3215 Photohelic Pressure Switch Gauge Range 0-15 psi
Dwyer A3215 Photohelic Pressure Switch/Gauge (0-15 psi)
Model: A3215
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Cover is clear polycarbonate plastic. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3215 Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3215 Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F (75C) copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F (21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20" Hg to 25 psig (-0.677 to 1.72 bar), MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar)
Temperature Limits:20 to 120F. (-6.67 to 48.9C), -20 to 120F (-28 to 48.9C) with low temperature option
Process Connections:? female NPT
Dimensions:4" (101.6 mm) dial face, 5 x 8" (127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpengineersindia
Dwyer A3001 Photohelic Pressure Switch Gauge Range 0-1.0 Inch w.c
Dwyer A3001 Photohelic Pressure Switch/Gauge, 0-1" WC, 1/8" NPT(F)
Dwyer Mfr # A3001 Item # WW-68062-26
3-in-One Indicating gauge, low-limit and high-limit control
set points and zero are easily adjusted on front of gauge
MORE ABOUT THIS ITEM
The Photohelic Switch/Gauge functions as versatile, highly repeatable pressure switches combined with a precise pressure gauge employing the time-proven Magnehelic gauge design. The Photohelic switch/gauge measures and controls positive, negative or differential pressures of air and compatible gases. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust setpoint indicators are controlled by knobs located on the gauge face. Individual setpoint deadband is one pointer width - less than 1% of full scale.Setpoints can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc.Gauge reading is continuous and unaffected by switch operation, even during loss of electrical power.In typical applications, these switch/gauges control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation. A plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.
Photohelic Switch/Gauges are used to control pressures in air conditioning systems, clean rooms, fluidic and pneumatic control systems, materials handling equipment, alarm or control fume exhaust systems, control pressure in air structures, and monitor respiratory and blood pressures.
Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.
Specifications & Description
Accuracy:2% full-scale at 70F (21C)
Dial Size:(in)4
Dial Size:(mm)102
Min Pressure:(in WC)0
Max Pressure:(in WC)1
Min Temperature:(F)20
Max Temperature:(F)120
Min Temperature:(C)7
Max Temperature:(C)60
Case:Aluminum
Lens:Material Polycarbonate
Process Connection:1/8" NPT(F)
Unit Of Measurement":WC
Display:Analog dial
Battery Type:120 VAC, 50/60 Hz
Electrical Connections:Screw terminal
Switch output:10 A at 120/240 VAC/28 VDC
Output:DPDT
Media:Compatibility Air and noncombustible, noncorrosive gases
Description:Photohelic Pressure Switch/Gauge, 0-1" WC, 1/8" NPT(F)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 week
Dwyer A3000-80CM Photohelic Pressure Switch Gauge Range 0-80 cm w.c.
Dwyer A3000-80CM Photohelic Pressure Switch/Gauge (0-80cm w.c.)
Model: A3000-80CM
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-80CM Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-80CM Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F(75C)copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F(21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week
Dwyer A3000-6MM Photohelic Pressure Switch Gauge Range 0-6 mm w.c.
Dwyer A3000-6MM Photohelic Pressure Switch/Gauge (0-6mm w.c.)
Model: A3000-6MM
Bezel and front cover (with set point knobs and zero adjustment screw) removed to expose Photohelic switch/gage set point mechanism. Gage pointer and light shutter are mounted on helix and balancing counterweight.
Dwyer A3000-6MM Offers
Features
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements
Applications
Air Conditioner Systems
Clean Rooms
Fume Exhaust Systems
Dwyer A3000-6MM Specifications
Switch Specifications
Switch Type:Each set point has 2 Form C relays (DPDT)
Repeatability:1% of FS
Electrical Rating:10 A at 28 VDC, 10 A at 120, 240 VAC
Electrical Connections:Screw terminals.Use 167F(75C)copper conductors only
Power Requirements:120 VAC, 50/60 Hz, 240 VAC and 24 VAC power optional
Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations
Set Point Adjustment:Adjustable knobs on face
Agency Approvals:CE, CSA, UL
Gauge Specifications
Service:Air and non-combustible, compatible gases
Accuracy:2% of FS at 70F(21.1C), 3% on -0, 4% on -00 models
Pressure Limits:-20"Hg to 25 psig(-0.677 to 1.72 bar), MP option;35 psig (2.41 bar), HP option;80 psig (5.52 bar)
Temperature Limits:20 to 120F.(-6.67 to 48.9C), -20 to 120F(-28 to 48.9C) with low temperature option
Process Connections:female NPT
Dimensions:4"(101.6 mm) dial face, 5 x 8"(127 x 209.55 mm)
Weight:4 lb (1.81 kg)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 5-6 Week