Bitumen Bituminous Mix Testing #320211

We are offering standard penetrometer.As per is 1448(p-92), is 1448(p-93), is 7401 ip 49 & 50, ip-179, ip-376, astmd 1321, astm d 937 this apparatus is used for penetration test on a wide variety of materials such as grease, petroleum, bitumen, tar, wax, olish, foodstuff, rubber asphalts and pharmaceutical creams. A depression is made in the sample by a needle of a definite weights which is measured intenths of a millimeter and expressed as penetration number. the apparatus consist of a cast aluminium base with an iron stand on which moves an aluminium arm and brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The penetration value and penetration time is indicated on digital panel with least count on 0.01mm. Supplied complete with adjustable needle holder, penetration needle, sample container, transfer dish and weight of 50 gms. Salient features. * with geared arrangement for moving the arm with geared unit.* provision to readout penetration value & time of process.* penetration value in 000.0* penetration value maximum up to 500.0 (50.00mm)* panel cut out size : 92 x 188 mm. * provision to set the time value of from 0.00 to 99.99 sec. * the timer output is 300v dc without load.* provision for tare for penetration. * provision for calibration. * provision for default calibration. * with pcprinter interface with software fir direct printout of calculated results (at extra cost) at extra cost bitumen container 55 mm x 35 mmbitumen container 70 mm x 45 mmbitumen container 55 mm x 57 mmbrass conealuminium solid coneweight (50gms or 100gms)grease container 10 cm dia & 10 cm heightbath for penetration test.

We bring forth superior quality Viscosity Testing Machine in the market. The Viscosity Testing Machine is used to measure absolute viscosity of viscosity graded paving bitumen (IS: 73:2006) at 60oC in accordance with IS: 1206 (Part II) (similar to ASTM D 2171), which uses a vacuum capillary viscometer. Besides, any other viscometer such as rotational viscometer cannot be used to measure the absolute viscosity at 60oC since the bitumen in non Newtonian in nature at this temperature. We offer Viscosity Testing Machine conforming to IS: 1206 (Part II) Method for Testing Tar and Bitumen Materials: Determination of Absolute Viscosity with the following components: Constant Temperature Bath - A suitable bath for immersion of at least 2 vacuum capillary viscometer tubes with a digital temperature controller. The accuracy of the temperature in the bath will be 0.1oC throughout the bathoVacuum System - Capable of maintaining a vacuum within 0.05 cm of the desired level The system will consist of vacuum pump, moisture trap, vacuum regulator, bleed valve, all interconnecting tubing/piping, and any other accessory as needed to complete the vacuum systemThermometer for Bath - Mercury in glass, range 37.8 to 82oC, and graduations of 0.2oC.Timing Device - A stop watch or stop clock capable of reading up to secondCannon - Manning Vacuum Viscometers - With manufacturers' calibration certificate, viscometer holder and silicone cork. Size 12 and Size 13 (one each) [Size 12 is suitable for testing VG-10 and Size 13 is suitable for testing VG-20, VG-30, and VG-40 bitumen.

We hold expertise in offering marshall stability test apparatus that is used for widely used for designing and evaluating bituminous paving mixes. The marshall stability test apparatus offered by us, can be availed at market leading prices. the apparatus consist of the following

• load frame
• marshal moulds (3 nos.)
• compaction pedestal
• compaction hammers (2 nos.)
• breaking head assembly

optional accessories the following accessories and consumables are not part of the standard supply and are mandatory for the testing work

• proving ring of 30 kn capacity with calibration certificate with traceability
• flow meter dial gauge with 0.01mm graduation and 25mm travel
• water bath with thermostatic or digital control with stirrer
• electronic balance of capacity 5 kg/1gm or 2 kg/0.1 gm or two pan balance with set of weights and analytical weight box
• pair of asbestos gloves
• filter paper ( pack of 100 )
• misc. Items: spatula, scoop, mixing tray, trowel, light mineral oil and benzene

the following additional instruments will speed up the testing process with ease and accuracy.