We are a prominent Manufacturer and Supplier of BOD Incubators, which are known for their high performance and longer working life. Manufactured using quality components, our BOD Incubators are the preferred choice of the buyers. Moreover, the BOD Incubators offered by us, can be availed at affordable prices. Optional Fittings Automatic Voltage StabilizerInterior illumination with 3 nos. fluorescent tubes of 60cm length placed vertically along the back walls separate ONOFF switch, minimum temp. up to 10o C only, when all the tubes are ONTime switch for 0-24 HoursHumidity control and humidification system by air compressor. (Water spray type).

Horizontal Laminar Airflow system allows operation in sterile and particle free conditions because the continuous flushing of the working area by a unidirectional and Horizontal and ultra filtered airflow, it assures a full product protection.Cleanliness ISO Class 5 as per ISO 14644-1 Direction of Flow Horizontal, Particle Retention 0.3 Micron & Above, Noise Level 65 decibel on A scale 5, Velocity 90 Feet / Minute 20, Worktable By IS 304 Grade Stainless Steel surface, Front door by 4 mm thick Polycarbonate Foldable Type, U V lamp Make PHILIPS, Illumination LED Light Fitting, Pressure (P) Inclined Manometer 0 25 mm range Other accessories 5 /15 Amp power point, Gas inlet, Castor Wheels & Power chord Power Supply 230V, Single phase, 50 Hz HEPA Filter: Media : Ultra clean glass fiber paper imported

Material of Construction:

Option: 1 The Cabinet made from Galvanized Iron 18 SWG sheet metal with polyurethane paint coated finish and bottom will be

supported with MS with PU coated stand

Option: 2 The Complete Cabinet in IS 304 grade SS construction with stain finish

Option: 3 The Cabinet made from IS 316 Stainless Steel 18 SWG sheet metal with Stain finish.

Optional: Microprocessor Controller: Microprocessor controller with LCD display, indicating down flow velocity, Hour counting of UV Lamp & Motor/ blower and alarm for safe mode door-opening height, Date of HEPA FILTER change. The Microprocessor controller will also switch off the UV amp after a pre-set timing

Available in Working size : 2` x 2` x 2` 3` x 2` x 2` 4` x 2` x 2` 6` x 2` x 2`

We are offering laboratory furnace. Horizontal, front loading typein this improved model, ceramic fiber wool insulation (instead of brick insulation) has been provided resulting in weight and size reduction of furnace. The weight and size of the furnace is 14 and 30% respectively as compared to brick furnace. The heat up time is less. Heat loss is very low-resulting in power saving. Technical specificationsconstruction : crc sheet - attractively powder coatedinsulation : ceramic fiber wool insulationmax temperature : 1200cworking temperature : 1150 ctemperature control : dual display microprocessor based digital temperature indicator cum controllertemperature sensor : k - type sensorheating : kanthal a-1 wire in coil form placed in the elements ribs & easily replaceablecircuit wiring : as per ce normsoperation on : 220230 volts, single phase, ac supplyratings : 2.0 kw size : 12" x 6" x 6" (d x w x h) vent portbuilt in vent port for removal of noxious gases etc preferably with a provision of connecting the extension pipe with vent lid should be air tight for volatile matter analysis. calibration port (if required by indenter)provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment safety featuresmuffle furnace will include following safety features 1) thermocouple breaks protection to cut power to the heating element in order to prevent thermocouple failure runway condition. Standard fittings supplied with the instrumenta) compensating cableb) indicating lampsc) indian standard power plug & cord notethe heating coils of the furnace are warranted for 1000 working hours or 12 months whichever earlier from the date of usage.

We are a prominent Manufacturer and Supplier of BOD Incubators, which are known for their high performance and longer working life. Manufactured using quality components, our BOD Incubators are the preferred choice of the buyers. Moreover, the BOD Incubators offered by us, can be availed at affordable prices. Optional Fittings Automatic Voltage StabilizerInterior illumination with 3 nos. fluorescent tubes of 60cm length placed vertically along the back walls separate ONOFF switch, minimum temp. up to 10o C only, when all the tubes are ONTime switch for 0-24 HoursHumidity control and humidification system by air compressor. (Water spray type).

Horizontal Laminar Airflow system allows operation in sterile and particle free conditions because the continuous flushing of the working area by a unidirectional and Horizontal and ultra filtered airflow, it assures a full product protection.Cleanliness ISO Class 5 as per ISO 14644-1 Direction of Flow Horizontal, Particle Retention 0.3 Micron & Above, Noise Level 65 decibel on A scale 5, Velocity 90 Feet / Minute 20, Worktable By IS 304 Grade Stainless Steel surface, Front door by 4 mm thick Polycarbonate Foldable Type, U V lamp Make PHILIPS, Illumination LED Light Fitting, Pressure (P) Inclined Manometer 0 25 mm range Other accessories 5 /15 Amp power point, Gas inlet, Castor Wheels & Power chord Power Supply 230V, Single phase, 50 Hz HEPA Filter: Media : Ultra clean glass fiber paper imported

Material of Construction:

Option: 1 The Cabinet made from Galvanized Iron 18 SWG sheet metal with polyurethane paint coated finish and bottom will be

supported with MS with PU coated stand

Option: 2 The Complete Cabinet in IS 304 grade SS construction with stain finish

Option: 3 The Cabinet made from IS 316 Stainless Steel 18 SWG sheet metal with Stain finish.

Optional: Microprocessor Controller: Microprocessor controller with LCD display, indicating down flow velocity, Hour counting of UV Lamp & Motor/ blower and alarm for safe mode door-opening height, Date of HEPA FILTER change. The Microprocessor controller will also switch off the UV amp after a pre-set timing

Available in Working size : 2` x 2` x 2` 3` x 2` x 2` 4` x 2` x 2` 6` x 2` x 2`

We are offering laboratory furnace. Horizontal, front loading typein this improved model, ceramic fiber wool insulation (instead of brick insulation) has been provided resulting in weight and size reduction of furnace. The weight and size of the furnace is 14 and 30% respectively as compared to brick furnace. The heat up time is less. Heat loss is very low-resulting in power saving. Technical specificationsconstruction : crc sheet - attractively powder coatedinsulation : ceramic fiber wool insulationmax temperature : 1200cworking temperature : 1150 ctemperature control : dual display microprocessor based digital temperature indicator cum controllertemperature sensor : k - type sensorheating : kanthal a-1 wire in coil form placed in the elements ribs & easily replaceablecircuit wiring : as per ce normsoperation on : 220230 volts, single phase, ac supplyratings : 2.0 kw size : 12" x 6" x 6" (d x w x h) vent portbuilt in vent port for removal of noxious gases etc preferably with a provision of connecting the extension pipe with vent lid should be air tight for volatile matter analysis. calibration port (if required by indenter)provision of hole with cover will be provided in the furnace door for putting temperature sensor for calibration of equipment safety featuresmuffle furnace will include following safety features 1) thermocouple breaks protection to cut power to the heating element in order to prevent thermocouple failure runway condition. Standard fittings supplied with the instrumenta) compensating cableb) indicating lampsc) indian standard power plug & cord notethe heating coils of the furnace are warranted for 1000 working hours or 12 months whichever earlier from the date of usage.