Electronet Equipment Pvt. Ltd.

Kondhwa, Pune, Maharashtra

• ON/OFF Controller

• Single Channel

• Universal Input Compatibility

• Open Sensor Indication

• Software Calibration

• Cold Junction Compensation for Thermocouple Inputs

• Large 0.8” Seven Segment LED Display

Electronet Series DPC-808 is a compact, universal input Process Indicator / Controller designed for a wide range of industrial applications.
It is suitable for monitoring and controlling parameters such as Temperature, Humidity, Pressure, Flow, Level, and more.

The measuring range and control points can be easily set using the keypad on the front fascia, while the control output is provided on the rear terminals.
Its low-cost design,  compact size, and large display height make the DPC-808 an excellent choice for process control requirements.

Type of Control: ON/OFF
Number of Inputs: 1

1. Universal Input

2. RTD – PT-100 / PT-200 (2 or 3 Wire)

3. Thermocouple – J / K / R / S / T / B / E Types

4. Current – 0–20 mA / 4–20 mA

5. Voltage – 0–5 V DC / 0–0.1 V DC

• 4 × 1 Digit, 0.8”, 7-Segment Red LED

• Programmable for mA & Voltage (–999 to +9999)

• Fixed display for all RTD & Thermocouple inputs

• R, S & B Type TC: ±0.5% of F.S.

• All other inputs: ±0.25% of F.S.

• Open Sensor Indication: Displays ‘OPEN’ for RTD & Thermocouple inputs

• Power Supply:

  1. 90–250 V AC

  2. 24 V DC (±10%)

• Power Consumption: <10 VA

• Temperature Drift: <0.01% of F.S./°C

• Response Time: <200 mSec

Enclosure Options:

1. DIN Standard

2. Weatherproof – IP66

3. Flameproof – CMRI Certified

Bezel Size Options:

• 96 (H) × 96 (W) × 160 (D) mm

• 48 (H) × 96 (W) × 160 (D) mm

Mounting:

• Flush Panel Mount (DIN Standard)

• Wall Mount for Weatherproof / Flameproof Models

Weight:

• Approx. 500 g (48 × 96 model)

• Less than 1 kg (96 × 96 model)

• Temperature: –20°C to 55°C

• Humidity: 5% to 95% RH (Non-condensing)

• ON/OFF Controller

• Single Channel Operation

• Software Calibration

• Open Sensor Indication

• Universal Input Compatibility

• Cold Junction Compensation for Thermocouple Input

• Separate Display for Process Value & Engineering Unit

Electronet’s Series DPC-100KK is a universal input Process Indicator / Controller designed for a wide range of industrial applications. It is ideal for monitoring and controlling parameters such as Temperature, Humidity, Pressure, Flow, Speed, and Level.
The measuring range and control points can be easily configured through the front keypad. A dedicated display for engineering units provides enhanced clarity and operator convenience. Control outputs are accessible from the rear terminals.

Type of Control: ON/OFF
No. of Inputs: 1

1. RTD – PT-100 / PT-200 (2 or 3 Wire), Cu-53 & Potentiometric

2. Thermocouple – J/K/R/S/T/B/E Types (Universal)

3. Current – 0–20 mA / 4–20 mA

4. Voltage – 0–5 V DC / 1–5 V DC / 0–10 V DC

• LED Display

• Programmable for mA & Voltage (–1999 to +9999)

• Fixed display for RTD & Thermocouple inputs

• For R, S & B Type TC: ±0.5% of F.S.

• For all other inputs: ±0.25% of F.S.

Open Sensor Indication: Displays “OPEN” for RTD & Thermocouple

• Power Supply: 90–250 V AC

• Power Consumption: <10 VA

• Temperature Drift: <0.01% of F.S. per °C

• Response Time: <100 mSec

Enclosure Options:

1. DIN Standard

2. Field Mount – IP65

3. Flameproof – CMRI IIA IIB Certified

Bezel Size (DIN STD): 48 (H) × 96 (W) × 160 (D) mm
Mounting: Flush Panel Mount / Wall Mount (WP/FLP)
Weight: <500 g (Approx.)

• Operating Temperature: –20°C to 55°C

• Humidity: 5% to 95% RH (Non-condensing)

• ON/OFF Controller – DPC-100

• Single-channel operation

• Software calibration

• Open sensor indication

• Cold Junction Compensation (CJC) for thermocouple inputs

Electronet series DPC-100 is a Digital Process Indicator and ON/OFF Controller designed for a wide range of industrial process applications.
It can monitor and control parameters such as Temperature, Humidity, Pressure, Flow, Level, and more.

The measuring range and control setpoints can be configured through the front keypad, and the control output is available on the rear terminals.
Optional features include retransmission output, communication interface, and transmitter power supply, making the DPC-100 a versatile process control solution.

• Type of Control: ON/OFF

• Number of Inputs: 01

• Input Types:

  1. RTD (PT-100 / PT-200), 2 or 3 wire

  2. Thermocouple – J, K, R, S, T, B, E types

  3. Current – 0–20 mA / 4–20 mA

  4. Voltage – 0–5 VDC / 1–5 VDC / 0–0.1 VDC

• Display: LED Display

• Range: Programmable for mA & Voltage (–999 to +9999)

• Accuracy:

  • R, S, B Thermocouples: Better than ±0.5% of F.S.

  • Other Inputs: Better than ±0.25% of F.S.

• Open Sensor Indication: “OPEN” displayed for RTD & Thermocouple inputs

• Response Time: < 200 ms

• Temperature Drift: < 0.01% of F.S. per °C

• Isolation: 1.4 KV between Input, Output & Power Supply

• Power Supply: 90–250 V AC or 24 V DC

• Power Consumption: < 10 VA

• Enclosure Options:

  1. DIN Standard

  2. Field Mount – IP65

  3. Flameproof – CMRI IIA IIB Certified

• Bezel Size: 96 (H) × 96 (W) × 160 (D) mm (DIN Standard)

• Mounting: Panel flush for DIN version; wall mount for WP/FLP

• Weight: < 1 kg (approx.)

• Temperature: –20°C to 55°C

• Humidity: 5% to 95% RH (non-condensing)

• ON/OFF Controller

• Dual Channel Operation

• Universal Input Compatibility

• Open Sensor Indication

• Software Calibration

• Cold Junction Compensation for Thermocouple Inputs

Electronet Series DPC-200 is a dual-channel, universal input Process Indicator / Controller designed for diverse industrial applications.
It is suitable for monitoring and controlling parameters such as Temperature, Humidity, Pressure, Flow, Level, and more.

Both channels are configurable through the front keypad for measuring ranges and control points. Control outputs are provided at the rear terminals. Retransmission output and communication interface further enhance the functionality of the DPC-200.

Type of Control: ON/OFF
Number of Inputs: 2

1. Universal Input

2. RTD – PT-100 / PT-200 (2 or 3 Wire)

3. Thermocouple – J / K / R / S / T / B / E Types

4. Current – 0–20 mA / 4–20 mA

5. Voltage – 0–5 V DC / 1–5 V DC / 0–0.1 V DC

• 4 × 2 Digit, 0.5” Red LED Display (7-Segment)

• Programmable for mA & Voltage (–999 to +9999)

• Fixed display for RTD & Thermocouple inputs

• R, S & B Type TC: ±0.5% of F.S.

• All other inputs: ±0.25% of F.S.

• Open Sensor Indication: Shows “OPEN” for RTD & Thermocouple

• Power Supply:

  • 90–250 V AC

  • 24 V DC (±10%)

• Power Consumption: <10 VA

• Temperature Drift: <0.01% of F.S./°C

• Response Time: <200 mSec

• Isolation: 1.4 kV between Input, Output & Power Supply

Enclosure Options:

1. DIN Standard

2. Field Mount – IP65

3. Flameproof – CMRI IIA IIB Certified

Bezel Size (DIN STD): 96 (H) × 96 (W) × 160 (D) mm
Mounting: Flush Panel Mount / Wall Mount (WP / FLP)
Weight: Approx. 1 kg

• Temperature: –20°C to 55°C

• Humidity: 5% to 95% RH (Non-condensing)

Product Description

The Electronet DPI-160-1 is a single-channel tri-color bar-graph indicator designed for precise monitoring in industrial applications. It supports key process parameters including temperature, humidity, pressure, flow, level, and more.
With a programmable input range, front-panel keypad configuration, and rear control outputs, the DPI-160-1 ensures flexible integration. The unit also features retransmission output, communication port, and a 101-segment bar-graph display for clear visual indication.

  Key Features

• Single-channel monitoring

• Universal input compatibility

• Multi-color 101-segment bar-graph display

• Open sensor detection

• Software calibration

• Cold junction compensation for thermocouple input

• Retransmission output & communication port

• Robust industrial enclosure

  Technical Specifications Performance Characteristics

Number of Bar-Graph Segments: 101
Number of Channels: 01

Input Types

1. Linear Inputs:

   • 4–20 mA, 0–20 mA, 0–6V, 1–5V, –20 µA to +20 µA

2. RTD Inputs:

   • PT-100 & PT-200 (–100°C to 400°C)

3. Thermocouples:

   • Types: J, K, R, S, T, B, E

4. Current Inputs:

   • 0–20 mA / 4–20 mA

5. Voltage Inputs:

   • 0–5 V DC / 0–0.1 V DC

Display

• 4-digit, 0.3” red LED for process value

• 101 bi-color LED bar-graph

Range

• Programmable for mA & voltage: –999 to +9999

• Fixed for RTD & thermocouple

Accuracy

• R & S thermocouples: ±0.5% of F.S.

• Other inputs: ±0.1% of F.S.

Open Sensor Indication

• Displays “OPEN” for RTD & thermocouple faults

Power Supply

• 90–250 V AC or 24V DC ±10%

• Power consumption: <10 VA

Environmental & Operational

• Temperature drift: <0.01% of F.S./°C

• Response time: <100 mSec

• Isolation: 1.4 KV (Input / Output / Power)

• Operating Temperature: –20 to 55°C

• Humidity: 5% to 95% non-condensing

Mechanical

• Enclosure: DIN Standard

• Bezel size: 36 mm (H) × 175 mm (W)

• Mounting: DIN Rail or Field Mount

• Weight: Approx. 2 kg

  Optional Features

• Transmitter power supply:

  • 24V DC / 30 mA or 24V DC / 100 mA

• Retransmission output:

  • 4–20 mA or 0–5 V (Isolated per channel)

• Alarm output:

  • 2 configurable potential-free relay contacts (High, Low, High-High, Low-Low)

  • 1 C/O, 1 Amp @ 230 V AC