Our Products
Our Complete range of products are Hydraulic Paper Cutting Machine, Hydraulic Programmable Paper Cutting Machine and Simple Paper Cutting Machine.
| |||||||||||||
| Five Star - 92cm. | Five Star - 115 cm. | |
| Cutting Width | 92 cm / 36 1/4" | 115 cm / 45 1/4" |
| Clamp Opening | 11.5 cm / 4 1/2" | 114 cm / 5 1/2" |
| Feed Depth | 92 cm / 36 1/4" | 115 cm / 45 1/4" |
| Power Required | 4 KW | 6 KW |
| Weight | 2300 kg | 3200 kg |
| Length x Width x Height | 90" x 82" x 60" | 100" x 93" x 65" |
| Maximum Cuts | 40 Cuts per/min | 40 Cuts per/min |
A new highly advanced programmable aper cutter with an economical price. The modern technology used on this machine accounts for its Ease of operation and maintain, efficient way it can handle routine cutting jobs. The outstanding advantage of the Five Star Programmable Cutting Machine is its simple operation.
. TFT -LCD Colour screen is used for controlling the machine and programming of backgauge.
High speed cutting is available by optimizing cutting process.
Three types of work mode - Manual mode, Programme Mode & Teach Mode.
2 steps backgauge speed control.
The body frame is cased as a single piece. Important construction Element are made directly assessable for ease of servicing.
BALL BEARING SCREW AND LM. GUIDE
A combination of ball bearing screw and linear motion slide way for the backgauge ensures smooth and uniform movement even at low speed, sensitive and correct movement corresponding to input and superb durability.
OPTICAL CUTTING LINE
An optical cutting line is illuminated
across the knife width. Operator can
memorize the cutting data withoutdescending the clamp.
Standard Features:
Complete electrical sys
50 Hz, or 220 V, 60 Hz, three-phase
current
Lockable main switch
Main drive motor with star-delta circuit
Protecting switches for all motors
Table light
Cutting line light and preclamping function
Cast-iron side air tables, right-hand and left-hand
Air bed unit for the cutting and side tables, complete with blower
Non-corroding (cladded) surfaces of the cutting and side tables
Rear and front side gauges on the left and right
Hydraulic clamping system
Self-monitoring light guard
Simultaneous two-hand cut control device
Self-monitoring diagnostic software
Two (2) heavy-duty cladded Steel knives
| Model | Unit | 76 | 92 | 115 |
| Cutting Table Width | mm/inch | 760/30" | 920/36" | 1150/45" |
| Feed Height | mm/inch | 100 mm/4" | 115mm/4.5" | 140mm/5.5" |
| Feed Width | mm/inch | 760/30" | 920/36" | 1150/45" |
| Continuous Cycle Rate | cuts/min. | 40 | 40 | 40 |
| Clamping Force (Min.) | kN/1bs (Max.) | 2/440 kN/1bs |
2/440 25/5500 |
2.5/550 30/661045/9920 |
|
Main Drive Power |
kW |
2.25 |
2.25 |
3.75 |
|
Net Weight |
kg |
1800 |
2300 |
3000 |
|
Dimension (1 x w x h) |
inch |
80"x 72"x 60" |
90" x 82" x 60" |
100" x 93" x 65" |
K. S. Khurana (Five Star Printing Machinery Co.)
Plot No- 266 East Mohan Nagar 100 Feet Road Near State Bank of Patiyala - 143006 , Amritsar, Punjab - 023628, India
Share us via
Write a Review
