Our Products
OPTIONAL EXTRA- WIRO PUNCHING DIE
PURPOSE:
THIS MACHINE IS USED FOR PUNCHING PRE-BOUND BOOKS, NOTE BOOKS OR CALENDERS, FEED SHEETS BY HAND.THE MACHINE CAN AUTOMATICALLY PUNCH AND COLLECT THE SHEETS IN ORDER. A WIDE RANGE OF PUNCHING BAR CAN BE AVAILABLE.
FEATURES:
1.EASY AND SIMPLE OPERATION.
2.SIMPLE AND FAST SIZE ADJUSTMENT, EASY AND QUICK CHANGE OF PUNCHING MOULDS.
3.DOUBLE PUNCHING SPEED COMPARE WITH THE NORMAL SEMI AUTOMATIC PUNCHING MACHINE.
With Electro magnetic clutch and power back gauge. Totally closed, for electric drive with manual rapid clamping device and mechanical feed. This new model of machine is operated by PUSH buttons only.
Features:
SM-83 | SM-92 | SM-109 | |
Length of Cut | 33" (83 cm) | 36" (90 cm) | 43" (109 cm) |
Width of Cut | 33" (83 cm) | 36" (90 cm) | 43" (109 cm) |
Pile Height | 4 1/2" (11.5 cm) | 4 1/2" (11.5 cm) | 5" (12.7 cm) |
Cuts per minute | 25 to 30 | 25 to 30 | 25 to 30 |
Motor Power required | 2.0 HP & 0.5 HP | 2.0 HP & 0.5 HP | 3.0 HP & 0.5 HP |
Space required (W x D x H) | 54 x 65 x 58" | 56 x 78 x 59" | 82 x 75 x 59" |
Simple in design sturdily built and totally enclosed for compactness to be operated at high speed. Ideally suited for cutting paper, card-board and other sheet materials. Friction/multi disc clutch system for maximum efficiency and minimum maintenance. Optional Foot clamp operation. Fine adjustment of knife-height by eccentric levers. Adjustable back-gauge for accurate parallelism with knife edge. To facilitate cutting of smallest strips of 25mm using the pronged side of the narrow cutting rake, the side gauges are positioned nearer to the cutting line. Centralised lubrication of moving parts. Illuminated cutting edge and measuring tape with magnifying lens for ease in fast-setting.
SA 84 | SA 92 | SA 109 | |
Cutting Length | 33" (830 mm) | 36" (920 mm) | 43" (1090 mm) |
Cutting Width | 33" (830 mm) | 36" (920 mm) | 43" (1090 mm) |
Pile Height | 4-1/2" (11.5 cm) | 4-1/2" (11.5 cm) | 5" (12.7 cm) |
Cuts per minute | 25 to 30 | 25 to 30 | 25 to 30 |
Power load (HP) | 2.0 | 2.0 | 3.0 |
Electric supply | 400/440 V AC 50 Hz 3 Phase | - | - |
Space required (W x D x H) | 54 x 65 x 58" | 56 x 78 x 59" | 82 x 75 x 69" |