One knob manual control, continuously variable through torodial auto transformer. : 2-20-100 mA.
Range: 0.1-5.00 kV Display: LED digital 3 digits Resolution: 0.01 kV Accuracy: ± 3% + 4 digits : Range: 0-2mA; 2-20mA and 20-100 mA Display: LED digital 3.5 digits Resolution: 2mA range: 1uA : 20mA range: 10uA : 100mA range: 100uA Accuracy: ± 3% + 4 digits
Settable : Thumbwheel switch:1-99 seconds Display: LED Digital 2 digits, countdown. Resolution: 1 second Accuracy: ± 5% : HV switched ON by remote switch. Timer does not funciton in this mode.
1) Self-check. if condition is abnormal, tester
shuts down & displays ‘Load unconnected’
2) Mains fuse.
3) Over voltage protection.
4) Over current protection.
5) Protective HV resistor connected inside. : In two units: Controller and Booster..
For high voltage testing, using hi-pot testers is quite a common practice. Working with high voltage is not an easy thing. First important thing is maintaining safety and a second important thing is analyzing data carefully. For this reason, you...
 Eases Up Your Testing Work By Generaeing 200kV: The Ac Hipot Tester will test the breakdown of the electrical insulating systems. The devices are required to test the high voltage for the manufacturing of diverse products like motors, generators, engineering research equipment...
CONTROL UNIT DETAILS : Meters, Switches, Indicating Lamps, Push Button, Fuses Etc. Are Fitted On The TOP Of Control Panel
  Comes With The Zero Start Interlock Facility The feature of the DC Hipot Tester is a convenient one that lets you stay safe from the defects that can happen in a system. The interlock installed inside the tester will keep you safe from any...
Panel mounted controls & indicators. » Variable from zero to 5 kV. » Digital kV and leakage mA meter. » Zero start interlock protection. » Selectable trip current. » Visual indication of status of test....
» Compact, rugged and portable BDV testers for AC or AC DC dielectric withstand breakdown testing of electrical equipments. » Voltage ramp up and down function. » Upper and lower preset function for leakage current. » Over voltage and over...
Output voltage:AC:5kV10mA; DC:6kV5mA, Randomly set Voltage rising time and testing time, Test voltage of insulation resistance:0.10kV-1.00kV, Test range of insulation resistance:1M -1000M...
The insulators testing device HVTS-HP is designed for testing the insulation of power cables and solid dielectric with the rectified voltage of up to 100 kV, as well as testing solid dielectrics with the sinusoidal voltage of up to 100 kV, 50 Hz....
Power Electronical’s PE-HVT-1 series of Automatic Hipot testers are build to test the Breakdown/flashover voltage of Insulation Dielectric, while ensuring that the user safety is never compromised. These testers are completely Automatic in...
the latest dc hi-pot tester provides a cost-effective solution to perform hi-pot testing of cables, generators, motors & other electrical products. User friendly front panel controls, high fault detection capability, insulated test probe to allow...
The latest DC Hi-Pot tester provides a cost-effective solution to perform Hi-Pot testing of cables, generators, motors & other electrical products. BENEFITS User friendly front panel controls High fault detection capability Non-destructive to...
Description :- These are electrical safety test devices that are commonly used for performing electrical compliance tests. There are different types of measurement performed by hipot testers including AC dielectric strength, DC dielectric strength,...
Electrical Safety Testing will Never be the Same With color touch LCD & high speed DSP technology, the compact & rugged V7X sets the standard for price/performance ratio. Made in the USA to meet tough UL, CSA, TUV and IEC Hipot requirements – the...
» Compact, rugged and portable BDV testers for AC or AC DC dielectric withstand breakdown testing of electrical equipments. » Voltage ramp up and down function. » Upper and lower preset function for leakage current. » Over voltage and over...
1) Self-check. if condition is abnormal, tester
shuts down & displays ‘Load unconnected’
2) Mains fuse.
3) Over voltage protection.
4) Over current protection.
5) Protective HV resistor connected inside. : In two units: Controller and Booster..
Application : Electrical Testing Laboratories,Transformer Manufacturing And Repair Industries Motor Manufacturing And Repair Industries,Pump Manufacturing And Repair Industries,Insulating Items Manufacturing Industries
Supply Type : Manufacturer
  Comes With The Zero Start Interlock Facility The feature of the DC Hipot Tester is a convenient one that lets you stay safe from the defects that can happen in a system. The interlock installed inside the tester will keep you safe from any...
The latest DC Hi-Pot tester provides a cost-effective solution to perform Hi-Pot testing of cables, generators, motors & other electrical products. BENEFITS User friendly front panel controls High fault detection capability Non-destructive to...
For high voltage testing, using hi-pot testers is quite a common practice. Working with high voltage is not an easy thing. First important thing is maintaining safety and a second important thing is analyzing data carefully. For this reason, you...
For Buyer 
For Seller 
Help 
Ask a question about 