Lathes in Kolkata

All Geared Bombay Lathe - 3000mm Admit

• Model : Bombay
• Make : Kirloskar
• Number Of Flower : All Geared Lathe Machine
• Admit Between Centres : 3000mm
• Condition : Defence Used, In Excellent Condition
• Centre Height : 14

WMW Niles Semi Automatic Mechanical Stainless Steel Facing Lathe Machine, For Turning, Drilling, Cutting

• Country of Origin : German
• Driven Type : Mechanical
• Material : Stainless Steel
• Automation Grade : Semi Automatic
• Brand Name : WMW Niles
• Bed Width : 1200mm
• Swing Over Bed : 3000mm
• Usage : Turning, Facing, Drilling, Cutting
• Condition : Used
• Speciality : Easy To Use, High Efficiency, Reliable, Robust Construction

HMT All Geared Lathe Machine

• Bed Material : Hardened
• Model : B32
• Type : Lathe Machine
• Brand Name : HMT
• Condition : Excellent
• Between Centres : 3000mm
• Spindle Bore : 104mm
• Centre Height : 320mm

Boyd Inc HMT Lathe Machine, Bar Capacity : Max 36 Mm

• Use : For cutting, finishing, etc.
• Travel Diameter : 180 mm
• Bar Capacity : Max 36 mm
• Layout : Horizontal
• Range of Spindle Speeds : 4000 rpm
• Speciality : Excellent functionality, Easy to operate, Optimum performance .
• Spindle Bore : 52.5 mm
• Country of Origin : 380 Volt
• Brand Name : Boyd Inc
• Phase : Three Phase

CNC Lathe Machine, Voltage : 240 Volt

• Automatic Grade : Automatic
• Lathe Machine Type : Horizontal Lathe
• Brand Name : Boyd Inc
• Phase : Single Phase
• Max Turning Diameter : 0-500 mm
• Country of Origin : 240 Volt
• Use : For finishing, shaping, cutting, etc.
• Power Source : Electric
• Material : Mild Steel
• Max Spindle Speed : 2000-3000 rpm

Automatic Turner Lathe Machine

• V Belt Size : 50 x 1880 mm
• Brand Name : Boyd Inc
• Lead Screw : 01.5" x 4 TPI
• Speciality : Strong construction, Minimal maintenance, Excellent performance .
• Movement of Compound Slide : 140 mm
• Weight : 1350 Kg
• Range of Spindle Speeds : 30 - 500 rpm (Low/High)
• Automation Grade : Automatic
• Swing over Cross Slide : 320 mm
• Bed Width : 12.3/4 Inch

Bore Lathe Machine, Voltage : 440 V

• Power : 2 hp
• Surface Finish : Galvanized
• Spindle Bore : 7 inch
• Country of Origin : 440 V
• Layout : Horizontal
• Brand/Make : Pathak
• Automation Grade : Semi-Automatic

Lathe Machines, Power : 2 HP

• Power : 2 HP
• Layout : Horizontal
• Automatic Grade : Automatic
• Model Name/Number : PLD-6G
• Spindle Bore : 38 mm
• Brand/Make : Pathak

Precision Cone Pulley Centre Lathe Machine

• SWING OVER SADDLE(DIA) : 10”
• CENTER FROM BED : 10”
• DIA. OF FEEDSHAFT : 1”
• ADMIT BETWEEN CENTRES : 2’3”
• WIDTH OF BED : 12”
•     MODEL : ST4
• POWER REQUIRED : 1HP
• SWING IN GAP (DIA) : 28”
• DIA. OF LEADSCREW : 1.3/8”
• NETT  WEIGHT (APPROX.) : 800 KGS.

CNC Trainer Milling Lathe Machine

• Condition : New
• Table Load Capacity : 100 Kg
• Operating Mode : CNC, Automatic, Semi-Automatic, Heavy Duty , Medium Duty , Old Gear Type
• Max. Depth Of Cut : 1 mm Possible
• Center Height : 6 and 1/2 Inch and above
• Minimum Increment : 0.001 mm
• Table Size : 200 X 600 mm
• Lathe Machine Type : Horizontal Lathe
• Lubrication System : Automatic (Motorized)

Panther - Extra Heavy Duty All Geared Lathe Machine

• SuitableFor : Conventional Lathes
• SpecialFeatures : Extra Heavy Duty
• Material : Metal
• Range : Wide Range
• SpecificPurpose : Very Specific Purposes
• Usage : Precision Tool Rooms
• Type : All Geared Lathe Machine

Metal Panther - All Geared Precision Lathes

• Application : Roll Turning, PVC Pipe Threading
• Type : All Geared Precision Lathe
• Material : Metal
• Special Features : Wide Range Of Lathe Machines Available

Metal Heavy Duty Precision Lathe Machine

• Packaging Type : Standard Packaging
• Special Features : Conventional Lathes
• Material : Metal
• Usage : PVC Pipe Threading, Turning Applications
• Specific Purposes : Roll Turning, PVC Pipe Threading

Metal Orbit Heavy Duty Lathe Machine, Color : Depends On Manufacturer

• Usage : Precision Tool Rooms, Roll Turning Applications
• Type : Lathe Machine
• Packaging Type : Depends On Manufacturer
• Supply Type : Manufacturer

All Geared Extra Heavy Duty Motorised Lathe Machine

• Usage : Machining Flat Surfaces Of Metal
• Type : Shaping Machine
• Supply Type : Manufacturer
• Material : Metal
• Motorised : Yes
• Accessories : Shaping Vice, Key Way Cutting Attachment

Metal Precision Lathe Machine

• Range : Conventional, Cone Pulley Belt, All Geared
• Material : Metal
• Suitable For : Precision Tool Rooms, Roll Turning
• Supply Type : Manufacturer
• Type : Lathe Machine

Heavy Duty Precision Lathe Machine

• Centre Height : 16"
• Bed Length : 10'0"
• No. of Spindle Speeds : 6
• We deal in a very wide range of Lathe machines.Our range consists of Conventional Lathes, cone pulley belt lathes, All...

Tool Room Lathe

• Approx. Weight in Kgs. : 900
• Bed Length : 4'6"
• We deal in a very wide range of Lathe machines.Our range consists of Conventional Lathes, cone pulley belt lathes, All Geared Lathes, Roll turning lathes, CNC Lathes, precision tool room lathes, general purpose lathes, pipe threading lathes and SPM...

Lathe Machines

• We deal in a very wide range of lathe machines.our range consists of conventional lathes, cone pulley belt lathes, all geared lathes, roll turning lathes, cnc lathes, precision tool room lathes, general purpose lathes, pipe threading lathes and spm...

Center Lathe Machine

• Width : 11
• Length : 1370
• Centre Height : 9
• Available in varied Bed Lengths with admit between Centres ranging from 1000mm to 3000mm. All major castings conform to...

Vertical Turning Lathe Machine

• Product Type : Vertical Turning Lathe Machine
• Brand Name : CNC Machine
• Supply Type : Manufacturer
• Dia Value : upto 12 mtr chuck dia
• Country of Origin : Delhi

Log Peeling Lathe Machine

• Features : Thrash Clipper for Waste Veneer Cutting, Veneer Transport
• Heavy Duty construction, High Speed, Hydraulic controlled Back-up Roller System, Pneumatic controlled Brake and Clutch System, Imported High Precision Screw System, Linear Guide ways system, Control Panel, Air Compressor, PLC with Variable Speed control with Manual Switch Drive...

Heavy Duty Log Peeling LATHE Machine-56

• Heavy Duty construction, High Speed, Hydraulic controlled Back-up Roller System, Pneumatic controlled Brake and Clutch System, Imported High Precision Screw System, Linear Guide ways system, Control Panel, Air Compressor, PLC with Variable Speed...

Spindle-less Peeling Lathe-4 Feet Size

•   This machine is ideal for peeling small diameter logs of 300mm and 1400mm length. Minimum peeling diameter of 30mm. The machine has adjustment for different veneer thickness....

Medium Duty Lathe Machine

• Application : MINI TOOL ROOM , EDUCATIONAL INSTITUTES, INDUSTRIAL TRAINING CENTRES, ENGINEERING COLLEGES, DIPLOMA COLLEGES .

Heavy Duty Lathe Machine

• Application : Tool Rooms , Steel & paper mills, Power plants, Ship building, Mining and textile industries, EDUCATIONAL INSTITUTES, REPAIRING & MAINTAINENCE, SUGAR MILLS .

Capstan Lathes

• HIPAT Capstan lathes are productive machines, suitable for turning, Drilling, Boring, Facing & Threading with full Norton Gear Box with Semi-Skilled operating pieces of jaw Chuck....

Lathe Machine

• We offer Lathe Machine. 1. 4.5ft - standard center height of 10” or 13” bore- 3", 2" "special bore"- 5" (if any) standard width of the bed geared, heavy. 2. 6ft- center height-12" , 14". bore- 3", 2" "special bore"- 5" (if any) standard width of...

Capstan Lathe

• Supply Type : Manufacturer
• HPSM’ Capstan Lathes are productive machines, suitable for Turning, Drilling, Boring, and Facing & Threading with full Norton Gear Box with Semi-Skilled operating pieces of Jaw Chuck. Being a leading manufacturer of Capstan Lathes, we have...

Turret Lathe

• Supply Type : Manufacturer
• Packing Size (Approx) : 5 x 3 x 5 fts.
• Capstan Lathes are productive machines, suitable for Turning, Drilling, Boring, and Facing & Threading with full Norton Gear Box with Semi-Skilled operating pieces of Jaw Chuck. Being a leading manufacturer of Capstan Lathes, we have dedicated...

Light Duty Lathe Machine

• Supply Type : Manufacturer
• Bed Length : 1065mm (3′-6")
• HPSM’ deals with latest technologies based light duty lathe machines that have been designed to make industrial tasks easier, faster and error free. Bed is made from 25 Grade Cast Iron of 180 BHN hardened, strictly inspected with Micro level,...

Used Lathe Machine

• We are offering used lathe machine. We want to sell hmt nh26 lathe machines with bed length 3000mm & height of center 260mm. Machines is in good working condition located in a plant in redi, maharastra. (also available in the same location, lathe...

Used Lathe Machine 2

• We are one of the leading supplier for selling idle plants & used machineries. we want to sell kirloskar lathe machine (centre) with bed length 3000mm height of centre 400 mm. Machines is in good working condition located in a plant in redi,...

Lathe Machine

• Supply Type : Manufacturer
• We Offer Lathe Machine. a Lathe is a Machine Tool Which Rotates the Workpiece On Its Axis to Perform Various Operations such as Cutting, Sanding, Knurling, Drilling, or Deformation with Tools that are Applied to the Workpiece to Create An Object...

Heavy Duty Precision

• Heavy Duty Precision Lathe Machine  are highly used in many industrial applications like heavy duty operations of turning, facing and screw cutting and other applications. Lathe Bed is of close grained alloy castings duly flame hardened & ground...

Chaser Holder General Purpose Lathe

• Chaser Holder For General Purpose Lathe  Suitable for all types of lathey machines. Solid steel construction for vibration free chasing of CTC Rollers. Can be used in both Clock-wise and anti clock-wise direction. Holds chaser firmly and reduces...

CNC Vertical Lathe

Horizontal Lathe

Used Lathe Machine

Used Lathe Machine

• Well condition. All size....