Lab and Life Instruments Pvt Ltd

Cbd Belapur, Navi Mumbai, Maharashtra

Simple, Secure -190C LN2 Vapor Storage

Ideal For:

• Laboratory, Repository or Clinical Use
• Active, Archive or Quarantine Collections

Simple, Secure -190C LN2 Vapor Storage

Ideal For:

• Laboratory, Repository or Clinical Use
• Active, Archive or Quarantine Collections

Simple, Secure -190C LN2 Vapor Storage

Ideal For:

• Laboratory, Repository or Clinical Use
• Active, Archive or Quarantine Collections

• Maintenance freebrushless DC motor
• Rare earth magnets give powerful stirring
• Stepless speed regulation 300-2000rpm
• Ultra silence and vibration-free design.
• PET top provides excellent chemical resistance
• Shaft can be fitted with a PH sensor or sensors for other purposes
  
  

  Features

  • Maintenance freebrushless DC motor
  • Rare earth magnets give powerful stirring
  • Stepless speed regulation 300-2000rpm
  • Ultra silence and vibration-free design.
  • PET top provides excellent chemical resistance
  • Shaft can be fitted with a PH sensor or sensors for other purposes

• High strength aluminum alloy bead with high thermal conductivity over wide temperature range.
• Flexible, convenient, easy to operate and adaptable to reaction vessels with different shapes and sizes.
• Accommodate the external temperature probe on the hotplate magnetic stirrer to achieve precise temperature control.
• The alloy bead does not adhere to the container inside surface, while the silicone oil is difficult to clean in the oil bath application.
• Eco-friendly, pollution free, poison free, fume free, highly safe and splash free heating.
• PTFE shell can effectively retain the heat and ensure human safety from burning injuries.
• The beads are easy to handle with. The contaminated portion can be cleaned and replaced separately.
  
  

  Features

  • High strength aluminum alloy bead with high thermal conductivity over wide temperature range.
  • Flexible, convenient, easy to operate and adaptable to reaction vessels with different shapes and sizes.
  • Accommodate the external temperature probe on the hotplate magnetic stirrer to achieve precise temperature control.
  • The alloy bead does not adhere to the container inside surface, while the silicone oil is difficult to clean in the oil bath application.
  • Eco-friendly, pollution free, poison free, fume free, highly safe and splash free heating.
  • PTFE shell can effectively retain the heat and ensure human safety from burning injuries.
  • The beads are easy to handle with. The contaminated portion can be cleaned and replaced separately.

ISLAND OR PENINSULA WITH SINK STATION AT THE END

Different islands can be assigned for different tasks. The Island design ensures a smooth traffic flow improving overall process control and usable space

ISLAND WITH SITTING WORKSTATION

The design of this islands allows multiple users to work independently at the same time. There is a possibility to work in both sitting and standing positions.

Lab&Life furniture is a systemic solution flexible, mobile and functional. The modular and adjustable design allows all modules to be connected in any custom configuration. This is easy to spot when designing island or wall-mounted casework. Worktops accessible from various angles, usually complemented with cabinets under the countertop. The position of reagent racks, uprights with modular shelving system, as well as sink units can be fully customized. This is a great solution, allowing to maximize space usage of your laboratory.

Tables are connected perpendicularly to rows of workstations or arranged independently of one another. The same modules can be used to create corner workstations. Rounded corners of hexagonal modules and island tables make it easier to move around the lab. This catalogue shows examples of furniture components, detailed description of which can be found on the following pages of the catalogue.

• SINGLE LEAF DOORS
• DOUBLE LEAF DOORS
• FOUR LEAF DOORS
• HATCH SINGLE LEAF DOORS
• HATCH DOUBLE LEAF DOORS
• EMERGENCY SINGLE LEAF DOORS
• EMERGENCY DOUBLE LEAF DOORS
• Double skin door with or without view panels, with the construction same as modular panels assembled with the door profile.
• Material of construction GPSP GI Sheet (0.8 mm thick) & Frame (1.2 mm thick) & for fire rating doors GPSP GI Sheet(1.2 mm thick) & Frame (1.6 mm thick).
• Shutter-42/44/46 mm thick
• Paint / Finish used Powder coated & Stainless steel.
• Thickness of Powder Coating-60-80 micron
• Sizes-Thickness- 50mm, 80mm, 100mm & 150mm Frame Thickness.
• Width 750, 900, 1000, 1200, 1500, 1800, 2000, 2200 mm
• Height 2100/2200 mm & customised sizes available.
• Door Accessories Stainless steel hinges 3-4 nos. per door, Stainless Steel D type handles on the pull side of 20 mm dia. with 300 mm long, Stainless steel push plate on push plate on push side size 125 x 300 mm, Dorma make door closure std arm (TS 68)
• Both side key operated, locking arrangement, automatic door bottom seal at the bottom, view panel with 6 mm thick safety glass, panic bar for emergency door, flush tower bolt in double door, stainless steel kick plate of 300 mm height & door interlocking provision.
• Filler material-PUF 402 kg/m3 /PIR 48+2 kg/m3/ROCKWOOL96+2 kg/m3.
• 2 HOURS FIRE RATING DOORS
  
  
  

• The multi-purpose large capacity centrifuges designed for large-volume daily-working laboratories
• Max. speed of 12, 000 rpm with high capacity and a large assortment of rotor
• Fast cooling function to 4 in 5 minutes for fast startup of cooled samples
• The compressor-off function when lid is open minimizes unnecessary cooling and frosting.
• Intuitive control interface with numeric input buttons allows easy setting and editing of running conditions.
• Selectable time mode of at set SPEED for counting running time only when reached the set speed
• A separate PULSE key for quick spin
• Parameters can be changed during operation.
• Key lock function helps the set parameters secured during operation.
• With motorized lid mechanics, only a gentle touch is sufficient to close and open the lid.
• Lid drop protection design allows easiness and safety when loading or unloading samples.
• The multi-purpose large capacity centrifuges designed for large-volume daily-working laboratories
• Max. speed of 12, 000 rpm with high capacity and a large assortment of rotor
• Fast cooling function to 4 in 5 minutes for fast startup of cooled samples
• The compressor-off function when lid is open minimizes unnecessary cooling and frosting.
• Intuitive control interface with numeric input buttons allows easy setting and editing of running conditions.
• Selectable time mode of at set SPEED for counting running time only when reached the set speed
• A separate PULSE key for quick spin
• Parameters can be changed during operation.
• Key lock function helps the set parameters secured during operation.
• With motorized lid mechanics, only a gentle touch is sufficient to close and open the lid.
• Lid drop protection design allows easiness and safety when loading or unloading samples.
• A large assortment of rotors, buckets and adaptors support diverse application doable with one instrument.
• A large assortment of rotors, buckets and adaptors support diverse application doable with one instrument.
  
  
  

• Technical description Walk on / Non walk on ceiling panel made out of powder coating GI/Pre painted GI / stainless steel sheets on both side and inside filled with infill of specified thickness along with peripheral G.I. profile. panels will be in the form of planks of 1200 mm width and length as per the drawing
• Skin-PCGI / PCGI (GPSP), PPGI / PPGI & SS
• Structural framework GI & Thickness of Sheet -0.5, 0.6 & 0.8 mm
• Insulation PUF density 402 kg / m3, PI R density 482 kg/m3
• ROCKWOOL density 96 kg /m3 to 144 kg/m3
• Gap should not be more than 4 mm.
• Panel thickness 35 mm, 50 mm, 80 mm & 100 mm Thick
• Load carrying capacity-75 to 250 kg per sqm.
• Support-Wall panels and suspension rods.
• Colour-RAL 9002 std colour & any other colour can be provided from the RAL chart.
• Cutout provision for HVAC & Electrical-Cutout can be provided with C type flashing.
• Hanging arrangement Panel will be hang with suspension rod, with adjustable turnbuckle & will be anchor fastened in slab

Incubator (Heating) are also known commonly as Bacteriological incubator:

This type of incubator is used majorly in laboratories mainly for the growth of bacterial cultures. It has a simple mechanism which maintains a constant set temperature as per the requirement. Accurate temperature maintained in the chamber is displayed on the display of the incubator.

Most of the incubators are programmable and can be set as per the requirement. These types of incubators come only with a heating system which maintains the temperature for growth of bacteria. These incubators are affected by the temperature of the surrounding environment so the prescribed set point is 10C above ambient temperature hence no cooling system is required or present in these chambers.

These chambers are unique offerings by Allyone are offered for a niche requirement from a client, wherein the users require a bigger chamber than a stand alone chamber, but the requirement is not as big as to opt for a Walk In Chamber. Also, if theres a space constraint these chambers are a perfect fit for such a requirement. This is a Golden Mean between the two!

The capacities we offer for our High Capacity Stand Alone Chambers are from 1500 Ltts (which is bigger than the max capacity of 1000 Ltrs that we offer for a Stand Alone Chamber) to 3000 Ltrs (which lesser than the min capacity of 4000 Ltrs that we offer for a walk in chamber)

Some of the features are similar as of Stand Alone Type of chambers, such as it have heavy duty insulated doors: two or more-depending on the capacity, with imported hinges & locks for easy operation & inner glass door with latch to observe samples without disturbing the set condition, also the control panel with display is fixed at the top of chamber & can be easily visible & accessed.

Standard Chamber Features & Provisions:

Construction:PCGI/SS 304/SS 316 Tongue & Groove type panels with PUF Density of 40Kg/m with thickness of 80 mm.

Sample Storage:

1. Racks: Heavy Duty SS 304 Frame secured strongly to chamber walls for strength.
2. Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

Doors:PUF Insulated External doors mounted with imported hinges & locks, Inner glass doors with latches. Door frame is secured with a silicone gasket on the entire perimeter to ensure an air tight, leak tight chamber.

Door Operation:Passcode protected door operation from software & HMI

Control System:

1. Ergonomically designed Control Panel.
2. Ferrule printed wiring.
3. Advanced PLC Program with built in processor-based Auto Tuning.
4. 4.3 HMI Color LCD Display.
5. Built in Redundancy & Safety.
6. Advanced High Accuracy Transmitter based sensors with output of 4-20 mA.

Temperature Control:

1. Efficient, Reliable, Time tested & Trustworthy Refrigeration Design.
2. Built in redundancy with PLC based Auto Change Over during power outage or component failure
3. PLC Controlled U Shaped SS Air Heater Banks.

Optional Backup System:PLC based Auto Changeover Backup system for Refrigeration.

Safety:Dedicated Thermostats for all key points: Chamber High Temperature, Utility High Temperature

PLC Safety Cut Off for Temperature: High, Higher & Low, Lower safety cut off.

Incubator Is a device in which the incubation process is done, an enclosure conditioned to a predetermined temperature to provide and maintain an artificially created optimal conditions for growth of microbial culture.

Incubation is a process -a period of time in which temperature and other environmental variables are provided at a desired temperature level for the growth and development of microbial culture.

Incubator those works at low temperature are used for incubation of biochemical reactions

Industries like pharmaceutical, research laboratories, agriculture, Food & beverages requires Cooling Incubators for their testing purposes.

Allyones top of the line Cooling Incubators are the most preferred choice to maintain accurate temperature & its uniformity throughout the chamber where high degree of constant temperature accuracy is required.

Incubators are mainly used for the growth & storage of bacterial cultures, Media Preparation, gentle incubation & conditioning and other purposes.

Standard Chamber Features & Provisions:

Construction:PCGI/SS 304/SS 316 Tongue & Groove type panels with PUF Density of 40Kg/m with thickness of 80 mm.

Sample Storage:

1. Racks: Heavy Duty SS 304 Frame secured strongly to chamber walls for strength.
2. Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

Doors:PUF Insulated External doors mounted with imported hinges & locks, Inner glass doors with latches. Door frame is secured with a silicone gasket on the entire perimeter to ensure an air tight, leak tight chamber.

Door Operation:Passcode protected door operation from software & HMI

Control System:

• Ergonomically designed Control Panel.
• Ferrule printed wiring.
• Advanced PLC Program with built in processor-based Auto Tuning.
• 4.3 HMI Color LCD Display.
• Built in Redundancy & Safety.
• Advanced High Accuracy Transmitter based sensors with output of 4-20 mA.

Temperature Control:

1. Efficient, Reliable, Time tested & Trustworthy Refrigeration Design.
2. Built in redundancy with PLC based Auto Change Over during power outage or component failure
3. PLC Controlled U Shaped SS Air Heater Banks.

Optional Backup System:PLC based Auto Change Over Backup system for Refrigeration.

Safety:Dedicated Thermostats for all key points: Chamber High Temperature, Utility High Temperature

PLC Safety Cut Off for Temperature:High, Higher & Low, Lower safety cut off.

Stability Chambers also known as Humidity chambersare a type of environmental testchamberthat are used to measure the effects of particular circumstances (Temperature & Humidity) on everything ranging from Pharmaceutical Drug substances, Formulations, Active Pharmaceutical Ingredients, biological materials, Chemicals, food and beverages, Cosmetics, Industrial materials, and even electrical components.

Thepurpose of stabilitytesting is to provide evidence on how the quality of a drug substance or drug product varies with time under the influence of a variety of environmental factors, such as temperature & humidity, establishes a retest period for the drug substance or a shelf life for the drug & establish product storage requirements and expiration dating.

In short, Stability is the ability of a pharmaceuticalproductto retain its chemical, physical, microbiological and biopharmaceutical properties within specified limits throughout its shelf-life.

Stability testing is of paramount and inseparable part when it comes to assessing the Assurance of Quality (QA)& Controlling the Quality (QC) of pharmaceutical Drug substance, formulations and products.

Testing stability of New Drugs, Formulations & Pharmaceutical Substances is one of the most important prerequisites in the licencing process those are defined by various Regulatory Authorities of the world like ICH (Guideline Q1AR2), US FDA (21 CFR Part 11), PICS, MHRA, Health Canada, TGA, WHO, ANVISA, ISPE & so on

These Regulatory Authorities define and harmonize the various stability Test conditions that are to be performed in order to provide authentic & verified evidence of the stability of the formulations.

Data from these Stability studies enable recommendation & establishment of storage conditions, retest intervals and shelf lives: projected shelf life & expiration and most importantly for New Product Development

The shelf life of a product is commonly estimated usingtypes of stability testing: Real-time, Intermediate, Long Term & Accelerated.

Inreal-time stabilitytesting, a product is stored at recommended storage conditions and monitored until it fails the specification.

Inaccelerated stabilitytests, a product is stored at elevated stress conditions of high temperature & humidity.

ALLYONE mastered & perfected the art & science of manufacturing Stability (Humidity) Chambers: an ability to maintain a stable temperature, and thus, maintain a stable value of relative humidity. We have a wide range of chambers for you to choose from as per your requirement: Standard & Customized.

Our Stability (Humidity) Chambers have a reputation to quickly achieve & maintain the defined setpoint to simulate the condition perfectly & flawlessly with extraordinary control on both Temperature & Humidity along with outstanding uniformity

Our Stability (Humidity) Chambers are conceptualized, meticulously designed and are built by artisans & professionals which meets and encompasses all the statutory regulatory requirements laid by worlds leading Regulatory Authorities & can be used to perform Stability Studies defined by ICH Guideline Q1AR2 for Real, Intermediate, Long Term & Accelerated types.

We have gained mastery in designing Specially designed chambers for Low Temperature-Low Humidity & High Temperature-Low Humidity operating conditions as well.

ALLYONE Stability Chambers comes with a dynamic, User Friendly, Future ready, most advanced proprietary software ALLYSOFT INTE GRO 2.0 compatible with US FDA 21 CFR Part 11 norms offering complete control & freedom in the hands of user so that the user can focus on the more important tasks on his/her hands!

ALLYSOFT INTE GRO 2.0 software precisely orchestrates all the utilities of the machine to achieve the Set Point at the quickest and maintains the condition even in the most demanding conditions without compromising on performance. The software records the test data accurately at all times without missing a single bit of data.

Extra emphasis has been given on the safety of users and equipment by providing multiple Safety Features in the form of Audio Visual Alarms ensuring trouble free performance & extended life of the machine.

ALLYONE Stability (Humidity) Chambers comes with the complete statutory Qualification & Validation Documentation part as laid down by cGMP Norms & ISPE recommendations which is of paramount importance in Pharmaceutical & Allied Industries: Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ) & Performance Qualification (PQ) of the equipment, as well as Operational Qualification (OQ) & Performance Qualification

(PQ) for the software ALLYSOFT INTE GRO 2.0

These chambers are unique offering by Allyone are offered for a niche requirement from a client, wherein the users require a bigger chamber than a stand alone chamber, but the requirement is not as big as to opt for a Walk In Chamber. Also, if theres a space constraint these chambers are a perfect fit for such a requirement. This is a Golden Mean between the two!

The capacities we offer for our High Capacity Stand Alone Chambers are from 1500 Ltrs (which is bigger than the max capacity of 1000 Ltrs that we offer for a Stand Alone Chamber) to 3000 Ltrs (which lesser than the min capacity of 4000 Ltrs that we offer for a walk in chamber)

Some of the features are similar as of Stand Alone Type of chambers, such as it have heavy duty insulated doors: two or more-depending on the capacity,

with imported hinges & locks for easy operation & inner glass door with latch to observe samples without disturbing the set condition, also the control panel with display is fixed at the top of chamber & can be easily visible & accessed

Vacuum oven also referred as Vacuum Drying Oven & Vacuum Dryer, is used for performing drying operations which generally comprise of removal of moisture from materials which are heat sensitive &/or highly hygroscopic in nature

The vacuum ovens avoids damage to the sensitive material while drying in vacuum as rapid temperature overshooting is avoided as the working principle behind the operation of a vacuum oven involves substantially lowering the ambient pressure to decrease the boiling point of the liquid in the substance via the use of a vacuum pump.

Vacuum drying is one of the most effective and gentle drying methods available. The aim of this method is to gently dry a high-grade product that contains water or a solvent without endangering the materials. Drying in a vacuum drying chamber is particularly recommended for compounds containing flammable solvents. Due to the oxygen in the air in particular, these compounds often develop an explosive atmosphere during the drying process. This is prevented when dried in a vacuum drying chamber. Vacuum drying also minimizes the risk of scaling or oxidation residue.

Standard Features:

Construction:Vacuum Oven comes in 2 different designs: Round & Rectangular. Internal- SS 304 with Mirror finish, Outer body SS 304.Body is dynamically designed from strength as well as working point of view.

Tray:SS 304.

Door:Viewing Glass door with heavy hinges and lock, secured with silicon gasket for air tight chamber.

Optional Systems:

• Vacuum Pump.
• Printer Interface.

Control system:Controller-Equipped with advanced PID based control system installed with Contactor, M C B, Sensors for operational accuracy & optimum performance. PID Controller Make: FUJI.

Allyone also provides PLC Based Control System for Vacuum Oven as per client requirement.

The Pharmaceutical & allied industries use Deep freezers for effective storage of drug products, life-saving vaccines and samples for diagnosis, but are also perfectly suited for temperature tests and aging subjected at sub-zero temperatures.

They can be used for storage of fresh and frozen blood supplies and vaccines, also for storage of enzymes for research.

Allyone Walk-In Deep freezers are available with Ante Chamber as a barrier between Ambient & Sub Zero, so as to cool down the samples from ambient temp to near zero, then shift them in the Deep Freezer so as to make the process more efficient & economical for your need for a precision-controlled storage equipment as low as -30C. Allyone deep freezers have great safety features and are trustworthy & reliable.

*Custom built Chambers are available in any dimensions and capacities.

Standard Chamber Features & Provisions:

Construction:PCGI/SS 304/SS 316 Tongue & Groove Type Panels with PUF density of 40Kg/m-Thickness: 120 mm for Deep Freezer With Pre-cooling Chamber (Ante-Room): Panel Thickness 80 mm

Sample Storage:

1. Racks: Heavy Duty SS 304 Frame secured strongly to chamber walls for strength.
2. Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

Door 1:For Ante Chamber: PUF Insulated door with Viewing window of Double Layered Toughened Glass, mounted with imported hinges & locks.

Door 2:For Deep Freezer: PUF Insulated door mounted with imported hinges & locks.

Door Operation:Passcode protected door from software & HMI.

Control System:

1. Ergonomically designed control panel.
2. Ferrule printed wiring.
3. Advanced PLC Program with built in processor-based Auto Tuning.
4. 2 Separate 4.3 HMI Color LED Display. (For both: Ante Room & Deep Freezer)
5. Built in Redundancy & Safety.
6. Advanced High Accuracy Transmitter Sensors with output of 4-20 mA.

Temperature Control:

1. Efficient, Reliable, Time tested & Trustworthy Refrigeration Design. Frost Free with De-frosting system.
2. Built in redundancy with PLC based Auto Change Over during power outage or component failure

Safety:

• PLC Safety Cut Off for Temperature: Low, Lower & High safety cut off.
• Human Safety: Person Trap button provided inside the Ante chamber, which triggers Audio Visual alarm. The button enables the trapped person to
• come out even if the door is physically locked from outside
• Emergency Stop: Button provided from outside.

EQUITRON advantages:

• PTFE coated variable drive energy efficient diaphragm pump manufactured with German technology
• Digital Controller with display of actual and set values
• Supplied with solvent trap

• For 19, 25 & 38 mm Test Tubes with notches light duty
• For 25 & 38 mm plain heavy duty also available

EQUITRON Round Baths with Digital control are ideal for reactions, extractions, analysis and tests.

Advantages:

Stainless Steel immersion heater peripheral shape to eliminate direct contact with flask even if flask touches the bottom. Digital Range: Ambient +10 to 250C.

• Double walled construction with efficient insulation system.
• Bath chamber of stainless steel.

Pharmaceutical & allied industries demand accurate standards to be followed when it comes to storage environments.

Cold Chambers, also known as Cooling Cabinets/ Pharma Refrigerator are an integral part of Stability studies within the Pharmaceutical & allied industries.

Storage in a controlled environment allows the indication of how safe products are to use and their optimum storage temperature.

Thus, manufacturers and distributors of pharmaceutical medicine, need to comply with regulations when it comes to the storage of raw materials, Refrigerated Products, Batch samples & other samples, working standards, reference standards, vaccines, reagents, and other critical items-such as Blood & Blood products, & are also called as Blood Bank Refrigerator (BBR).

Close monitoring of the temperature is mandatory as the nature of goods stored in Cooling Cabinet/ Cold Chamber is such that if temperature is not carefully maintained & monitored it may reach a critical point, so temperature fluctuations must be avoided at all costs.

Allyone has a long & rich experience of manufacturing state of the art Cooling Cabinets/ Cold chambers which are the most trustworthy equipment maintaining the exact set point, assuring absolute uniformity as they are meticulously designed & built for optimum performance keeping in mind environment friendly aspects: use of CFC Free gasses & low on power consumption.

Allyone provides professional services (software) for continuous monitoring of Hot & Cold spots based on Rational Studies/Mapping.

*Custom built Chambers are available in any dimensions and capacities.

Standard Chamber Features & Provisions:

Construction: PCGI/SS 304/SS 316 Tongue & Groove Type Panels with PUF Density of 40Kg/m with thickness of 80 mm.

Sample Storage:

1. Racks: Heavy Duty SS 304 frame secured firmly to chamber inner walls for strength.
2. Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

Door:PUF Insulated door with Full View double layered Toughened Glass, mounted with imported hinges & locks.

Door Operation:Passcode protected door operation from software & HMI

Control System:

1. Ergonomically designed control panel.
2. Ferrule printed wiring.
3. Advanced PLC program with built in processor-based Auto Tuning.
4. 4.3 HMI Color LCD Display.
5. Built in Redundancy & Safety.
6. Advanced High Accuracy Transmitter based sensors with output of 4-20 mA.

Temperature Control:

1. Efficient, Reliable, Time tested & Trustworthy refrigeration design.
2. Built in redundancy with PLC based Auto Change Over during power outage or component failure viz: Compressor.
3. PLC Controlled U Shaped SS Air Heater Banks.

Safety:Dedicated Thermostats for all key points: Chamber High Temperature, Utility High Temperature

PLC Safety Cut Off for Temperature: High, Higher & Low, Lower safety cut off.

Human Safety:Person Trap button provided inside the chamber, which triggers Audio Visual alarm. The button enables the trapped person to come out even if the door is physically locked from outside

Emergency Stop:button provided from outside.

Incubator Is a device in which the incubation process is done, an enclosure conditioned to a predetermined temperature to provide and maintain an artificially created optimal conditions for growth of microbial culture.

Incubation is a process -a period of time in which temperature and other environmental variables are provided at a desired temperature level for the growth and development of microbial culture.

Every organism has an incubation period for its growth and development. If incubation is not provided it will result in degenerated the growth of an organism, therefore incubation is an important aspect for the proper growth and development.

Incubator those works at low temperature are used for incubation of biochemical reactions

Industries like pharmaceutical, research laboratories, agriculture, Food & beverages requires a Cooling Incubators

Allyones top of the line Cooling Incubators are the most preferred choice to maintain accurate temperature & its uniformity throughout the chamber for incubation where high degree of constant temperature accuracy is required.

Incubators are mainly used for the growth & storage of bacterial cultures, Media Preparation, gentle incubation & conditioning and other purposes.

*Custom built Chambers are available in any dimensions and capacities.

Standard Chamber Features & Provisions:

Construction:PCGI/SS 304/SS 316 Tongue & Groove Type Panels with PUF Density of 40Kg/m with thickness of 80 mm.

Sample Storage:

1. Racks: Heavy Duty SS 304 frame secured firmly to chamber inner walls for strength.
2. Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

Door:PUF Insulated door with Full View double layered Toughened Glass, mounted with imported hinges & locks.

Door Operation:Passcode protected door operation from software & HMI

Control System:

1. Ergonomically designed control panel.
2. Ferrule printed wiring.
3. 3. Advanced PLC program with built in processor-based Auto Tuning.
4. 4. 4.3 HMI Color LCD Display.
5. 5. Built in Redundancy & Safety.
6. 6. Advanced High Accuracy Transmitter based sensors with output of 4-20 mA.

Temperature Control:

1. Efficient, Reliable, Time tested & Trustworthy refrigeration design.
2. Built in redundancy with PLC based Auto Change Over during power outage or component failure viz: Compressor.
3. PLC Controlled U Shaped SS Air Heater Banks.

Safety:Dedicated Thermostats for all key points: Chamber High Temperature, Utility High Temperature

PLC Safety Cut Off for Temperature:High, Higher & Low, Lower safety cut off.

Human Safety:Person Trap button provided inside the chamber, which triggers Audio Visual alarm. The button enables the trapped person to come out even if the door is physically locked from outside

Emergency Stop:button provided from outside.

Incubator Is a device in which the incubation process is done, an enclosure conditioned to a predetermined temperature to provide and maintain an artificially created optimal conditions for growth of microbial culture.

Incubation is a process a period of time in which temperature and other environmental variables are provided at a desired temperature level for the growth and development of microbial culture.

Every organism has an incubation period for its growth and development. If incubation is not provided it will result in degenerated the growth of an organism, therefore incubation is an important aspect for the proper growth and development.

Incubator those works at low temperature are used for incubation of biochemical reactions

Industries like pharmaceutical, research laboratories, agriculture, Food & beverages requires a Cooling Incubators

Allyones top of the line Cooling Incubators are the most preferred choice to maintain accurate temperature & its uniformity throughout the chamber for incubation where high degree of constant temperature accuracy is required.

Incubators are mainly used for the growth & storage of bacterial cultures, Media Preparation, gentle incubation & conditioning and other purposes.

*Custom built Chambers are available in any dimensions and capacities.

Standard Chamber Features & Provisions:

Construction: PCGI/SS 304/SS 316 Tongue & Groove type panels with PUF Density of 40Kg/m with thickness of 80 mm.

Sample Storage:

1. Racks: Heavy Duty SS 304 Frame secured strongly to chamber walls for strength.
2. Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

Doors:PUF Insulated External doors mounted with imported hinges & locks, Inner glass doors with latches. Door frame is secured with a silicone gasket on the entire perimeter to ensure an air tight, leak tight chamber.

Door Operation:Passcode protected door operation from software & HMI

Control System:

1. Ergonomically designed Control Panel.
2. Ferrule printed wiring.
3. Advanced PLC Program with built in processor-based Auto Tuning.
4. 4.3 HMI Color LCD Display.
5. Built in Redundancy & Safety.
6. Advanced High Accuracy Transmitter based sensors with output of 4-20 mA.

Temperature Control:

1. Efficient, Reliable, Time tested & Trustworthy Refrigeration Design.
2. Built in redundancy with PLC based Auto Change Over during power outage or component failure
3. PLC Controlled U Shaped SS Air Heater Banks.

Optional Backup System:PLC based Auto Changeover Backup system for Refrigeration.

Safety: Dedicated Thermostats for all key points: Chamber High Temperature, Utility High Temperature

PLC Safety Cut Off Temperature:High, Higher & Low, Lower Safety Cut Off.

Walk-In Humidity Chamber

Stability Chambers also known as Humidity chambersare a type of environmental test chamber that are used to measure the effects of particular circumstances (Temperature & Humidity) on everything ranging from Pharmaceutical Drug substances, Formulations, Active Pharmaceutical Ingredients, biological materials, Chemicals, food and beverages, Cosmetics, Industrial materials, and even electrical components.

The purpose of stabilitytesting is to provide evidence on how the quality of a drug substance or drug product varies with time under the influence temperature & humidity, establishes a retest period for the drug substance or a shelf life for the drug & establish product storage requirements and expiration dating.

In short Stability is the ability of a pharmaceuticalproductto retain its chemical, physical, microbiological and biopharmaceutical properties within specified limits throughout its shelf-life.

*Custom built Chambers are available in any dimensions and capacities.

Standard Chamber Features & Provisions:

Construction:PCGI/SS 304/SS 316 Tongue & Groove Type Panels with PUF Density of 40Kg/m3 with thickness of 80 mm.

Sample Storage:

• Racks: Heavy Duty SS 304 frame secured firmly to chamber inner walls for strength.
• Trays: Perforated types (CNC punched). Strengthened with support rails to prevent deformations.

Door:PUF Insulated door with Full View double layered Toughened Glass, mounted with imported hinges & locks.

Door Operation:Passcode protected door operation from software & HMI

Control System:

• Ergonomically designed control panel.
• Ferrule printed wiring.
• Advanced PLC program with built in processor-based Auto Tuning.
• 3 HMI Color LCD Display.
• Built in Redundancy & Safety.
• Advanced High Accuracy Transmitter based sensors with output of 4-20 mA.

Temperature Control:

• Efficient, Reliable, Time tested & Trustworthy refrigeration design.
• Built in redundancy with PLC based Auto Change Over during power outage or component failure viz: Compressor.
• PLC Controlled U Shaped SS Air Heater Banks.

Safety:Dedicated Thermostats for all key points: Chamber High Temperature, Utility High Temperature

PLC Safety Cut Off for Temperature:High, Higher & Low, Lower safety cut off .

Human Safety:Person Trap button provided inside the chamber, which triggers Audio Visual alarm. The button enables the trapped person to come out even if the door is physically locked from outside

Emergency Stop:button provided from outside.

Walk-In Humidity Chamber

Stability testing is of paramount and inseparable part when it comes to assessing the Assurance of Quality (QA)& Controlling the Quality (QC) of pharmaceutical Drug substance, formulations and products.

Testing stability of New Drugs, Formulations & Pharmaceutical Substances is one of the most important prerequisites in the licencing process those are defined by various Regulatory Authorities of the world like ICH (Guideline Q1 AR2), US FDA (21 CFR Part 11), PICS, MHRA, Health Canada, TGA, WHO, ANVISA, ISPE & so on

These Regulatory Authorities defines and harmonize the various stability Test conditions that are to be performed in order to provide authentic & verified evidence of the stability of the formulations.

Data from these Stability studies enable recommendation & establishment of storage conditions, retest intervals and shelf lives: projected shelf life & expiration and most importantly for New Product Development

The shelf life of a product is commonly estimated usingtypes of stability testing: Real-time, Intermediate, Long Term & Accelerated.

Inreal-time stabilitytesting, a product is stored at recommended storage conditions and monitored until it fails the specification.

Inaccelerated stabilitytests, a product is stored at elevated stress conditions of high temperature & humidity.

ALLYONE mastered & perfected the art & science of manufacturing Stability (Humidity) Chambers: an ability to maintain astabletemperature, and astablevalue of relative humidity. We have a wide range of chambers for you to choose from as per your requirement: Standard & Customized.

Our Stability (Humidity) Chambers have a reputation to quickly achieve & maintain the defined setpoint to simulate the condition perfectly & flawlessly with extraordinary control on both Temperature & Humidity along with outstanding uniformity.

Our Stability (Humidity) Chambers are conceptualized, meticulously designed and are built by artisans & professionals which meets and encompasses all

the statutory regulatory requirements laid by worlds leading Regulatory Authorities & can be used to perform Stability Studies defined by ICH Guideline Q1AR2 for Real, Intermediate, Long Term & Accelerated types.

We have gained mastery in designing Specially designed chambers for Low Temperature-Low Humidity, High Temperature, Low Humidity operating conditions as well.

ALLYONE Stability Chambers comes with a dynamic, User Friendly, Future ready, most advanced proprietary software ALLYSOFT INTE GRO 2.0 compatible with US FDA 21 CFR Part 11 norms offering complete control & freedom in the hands of user so that the user can focus on the more important tasks on his/her hands!

ALLYSOFT INTE GRO 2.0 software precisely orchestrates all the utilities of the machine to achieve the Set Point at the quickest and maintains the condition even in the most demanding conditions without compromising on performance. The software records the test data accurately at all times without missing a single bit.

Extra emphasis has been given on to the safety of users and equipment by providing multiple Safety Features in form of Audio-Visual Alarms ensuring trouble free performance & extended life of machine.

ALLYONE Stability (Humidity) Chambers comes with the complete statutory Qualification & Validation Documentation part as laid down by cGMP Norms & ISPE recommendations which is of paramount importance in Pharmaceutical & Allied Industries: Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ) & Performance Qualification (PQ) of the equipment, as well as Operational Qualification (OQ) & Performance Qualification (PQ) for the software ALLYSOFT INTE GRO 2.0

• High centrifugation speed that goes up to 27, 590 xg (16, 000 rpm)
• Swing-Out bucket rotors accommodate tubes and bottles from 0.2 mL to 1, 000 mL
• Motorized soft-touch lid for easy effortless closing
• Highly visible display screen with integrated touch buttons for easy maintenance
• Numeric keys for quick setting
• Fast-Cool function that sets temperature to 4C in 5 minutes for a quick start
• Key-lock function to prevent any unintentional changes during operation
• High centrifugation speed that goes up to 27, 590 xg (16, 000 rpm)
• Swing-Out bucket rotors accommodate tubes and bottles from 0.2 mL to 1, 000 mL
• Motorized soft-touch lid for easy effortless closing
• Highly visible display screen with integrated touch buttons for easy maintenance
• Numeric keys for quick setting
• Fast-Cool function that sets temperature to 4C in 5 minutes for a quick start
• Key-lock function to prevent any unintentional changes during operation
• Automatic rotor recognition and imbalance detection warning for safety
• Automatic rotor recognition and imbalance detection warning for safety
  
  
  

• Technical description Supply and Installation of double glass 6mm thick view panel flush from both side of wall fixed with both side adhesive tape over GI frame width to match wall thickness with silica gel desiccant arrangement and made air tight with sealant.
• Material of construction Extruded aluminium profiles & Powder coated GI.
• Dimension view panel glass size depends on the size of each view panels.
• Glass thickness & type Toughened & 6mm thick.
• Border-20 mm black border ceramic paint.
• Tape-Both side adhesive or 3M tape.
• Silicone All four side will be filled with sealants to maintain uniformity.
• Desiccant material Silica gel provided inside the provide to absorb moisture.
• Type Single glass/both side glass, break open panels, civil windows & full glasspanels.

The task of weighing tables is to isolate specialized equipment from vibrations generated by other elements of laboratory
equipment. Anti-vibration stone slab mounted in tables suppress all vibrations that could affect the accuracy of
measurements and readings.

The function of weighing tables in both ST and LM versions is identical. The difference lies in the material used to fill the
structure. The ST version uses sheet steel panels, customized according to the type and colour of the casework in a
particular laboratory. The LM version is finished with laminated particle board. The tables can be additionally equipped with
a practical drawer.

• Two sizes designed for 60 & 90 mm plates
• Angular design ensures even pressure on entire surface and eliminates piercing of media layer
• Silicone grip ensures firm non slippery grip on the Spreader handle
• Environment friendly Reusable and sterilisable
• Can be autoclaved or spot sterilised using burner upto 200 C
  
  
  

• Three-dimensional rocking motion with an angle of 9
• Max. load capacity is 5kg with platform
• Speed range of 10-70rpm
• Double LCDs for independent display of time and speed
• Various of platform accessori
  
  

  Features

  • Three-dimensional rocking motion with an angle of 9
  • Max. load capacity is 5kg with platform
  • Speed range of 10-70rpm
  • Double LCDs for independent display of time and speed
  • Various of platform accessori

• Die punched Burr free holes.
• SS racks are polished and aluminium racks are powder coated.
• SS rings on two-sides (for Kahn Racks) for easy lifting.
• Top & Centre with holes & bottom plain.
  Advantages:
• • Die punched Burr free holes.
  • SS racks are polished and aluminium racks are powder coated.
  • SS rings on two-sides (for Kahn Racks) for easy lifting.
  • Top & Centre with holes & bottom plain.

• For small amount of sample mix;
• Touch operation;
• Fixed speed: 3000rpm;
• Small and beautiful;
• DC brushless motor, stable performance.
  
  

  Features

  • For small amount of sample mix;
  • Touch operation;
  • Fixed speed: 3000rpm;
  • Small and beautiful;
  • DC brushless motor, stable performance.

• Max. load capacity is 7.5kg(L330) and 2.5kg(L180) with platform
• Double LCDs for independent display of time and speed
• Wide range of platforms for use with a variety of vessels
• Maintenance- free brushless DC motor
• Over speed detection and protection
  
  

  Features

  • Max. load capacity is 7.5kg(L330) and 2.5kg(L180) with platform
  • Double LCDs for independent display of time and speed
  • Wide range of platforms for use with a variety of vessels
  • Maintenance- free brushless DC motor
  • Over speed detection and protection

• Max. load capacity is 7.5kg(O330) and 2.5kg(O180) with platform
• Double LCDs for independent display of time and speed
• Used with a wide variety of accessories
• Maintenance- free brushless DC motor
• Over speed detection and protection
• Remote function provides PC control and data transmission
  
  

  Features

  • Max. load capacity is 7.5kg(O330) and 2.5kg(O180) with platform
  • Double LCDs for independent display of time and speed
  • Used with a wide variety of accessories
  • Maintenance- free brushless DC motor
  • Over speed detection and protection
  • Remote function provides PC control and data transmission

• Maintenance-free brushless DC motor
• Max speed 1100rpm
• Max.temperature 120C
• Stainless steel work plate, covered with silicone cushion, provides the excellent performance of heating uniformity and skid resistance

• Speed range of 0-70rpm
• Six roller design for gentle rolling and easy to Specification
  
  

  Features

  • LCD displays the speed and time
  • Speed range of 10-70rpm
  • Six roller design for gentle rolling and easy to clean
  • Continuous or timer operation

• Max. load capacity is 7.5kg(O330) and 2.5kg(O180) with platform
• Double LCDs for independent display of time and speed
• Used with a wide variety of accessories
• Maintenance- free brushless DC motor
• Over speed detection and protection
• Remote function provides PC control and data transmission
  
  

  Features

  • Max. load capacity is 7.5kg(O330) and 2.5kg(O180) with platform
  • Double LCDs for independent display of time and speed
  • Used with a wide variety of accessories
  • Maintenance- free brushless DC motor
  • Over speed detection and protection
  • Remote function provides PC control and data transmission

• It can accommodate up to 10 510ml blood vessels, or 4 50ml tubes, with different silicon mattress
• accessories.
  
  

  Features

  • It can accommodate up to 10 510ml blood vessels, or 4 50ml tubes, with different silicon mattress
  • accessories.

• It can accommodate up to 16 510ml blood vessels, or 6 50ml tubes on each of the two layers with different silicon mattress accessories.
• Tilt angle up to 40.
  
  

  Features

  • It can accommodate up to 16 510ml blood vessels, or 6 50ml tubes on each of the two layers with different silicon mattress accessories.
  • Tilt angle up to 40.

Features

• Maintenance-free brushless DC motor
• Speed range of 0-1100rpm
• Stainless steel work plate covered with silicone cushion, provides excellent performance of skid resistance
  
  

  Key Features

  • Maintenance-free brushless DC motor
  • Speed range of 0-1100rpm
  • Stainless steel work plate covered with silicone cushion, provides excellent performance of skid resistance

Simple, Secure -190C LN2 Vapor Storage

Ideal For:

• Laboratory, Repository or Clinical Use
• Active, Archive or Quarantine Collections

• Brushless DC motor is maintenance free and explosion-proof
• Digital temperature control with max. temperature at 340C
• Digital speed control with max. speed up to 1500rpm
• Max. stirring quantity of H2O at 20L
• Safety circuits provide overheating protection
• The HOT warning will flash if the plate temperature is above 50C even when the hotplate is turned off
• Wide range timer function from 1min to 99h59min(MS-H-ProT only)
• High-resolution LCD display shows actual temperatures and speed (MS-H-ProT displays the time also)
• External temperature control is possible by connecting the temperature sensor(PT 1000) with accuracy at 0.2C
• Stainless steel work plate with ceramic coating provides good chemical-resistant performance
• Remote function provides PC control and data transmission
• A wide variety of accessories are available
  
  

  Features

  • Brushless DC motor is maintenance free and explosion-proof
  • Digital temperature control with max. temperature at 340C
  • Digital speed control with max. speed up to 1500rpm
  • Max. stirring quantity of H2O at 20L
  • Safety circuits provide overheating protection
  • The HOT warning will flash if the plate temperature is above 50C even when the hotplate is turned off
  • Wide range timer function from 1min to 99h59min(MS-H-ProT only)
  • High-resolution LCD display shows actual temperatures and speed (MS-H-ProT displays the time also)
  • External temperature control is possible by connecting the temperature sensor(PT 1000) with accuracy at 0.2C
  • Stainless steel work plate with ceramic coating provides good chemical-resistant performance
  • Remote function provides PC control and data transmission
  • A wide variety of accessories are available
  
  
  

• A wide range of speed from 0 to 1500rpm
• Used for various mixing applications with optional adapters
• Maintenance-free brushless DC motor
  
  

  Features

  • A wide range of speed from 0 to 1500rpm
  • Used for various mixing applications with optional adapters
  • Maintenance-free brushless DC motor

• Electronic adjustment of speed and time
• LCD display speed and time
• Speed range from10 to 70rpm
• Provides gentle but effective rolling
• A wide variety of accessories are available

Applications :

LaboratoryTubeRotatorsareidealforBiochemistry, MolecularBiologyandClinicalapplications.Providesagentlebuteffectivemixingofbiologicalsamplesin1.5mLto50mLmicrotubes, usedinavarietyofapplicationsincludingimmuneprecipitations, preventionofbloodcoagulation, latexdiagnosticsetc.

Features

• Electronic adjustment of speed and time
• LCD display speed and time
• Speed range from10 to 70rpm
• Provides gentle but effective rolling
• A wide variety of accessories are available

• Electronic adjustment of speed and timer
• Double LEDs for independent display of time and speed
• Speed range of 40-200rpm
• Fixed board facemax.load capacity is 2kg with platform
• Continuous operation (endless)
• Electronic time switching clock: 1min-19h59min
  
  

  LED Digital Orbital Shaker

  • Electronic adjustment of speed and timer
  • Double LEDs for independent display of time and speed
  • Speed range of 40-200rpm
  • Fixed board facemax.load capacity is 2kg with platform
  • Continuous operation (endless)
  • Electronic time switching clock: 1min-19h59min

It is widely used in chemical synthesis, physical and chemical analysis, bio-pharmaceuticals etc.

• Independent heating and stirring control
• LCD display shows actual temperatures and speed
• PID controller ensures a precise and steady heating process, Max.temperature up to 340
• Brushless DC motor enables more powerful speed control
• External temperature sensor(PT1000) with accuracy at 0.2
• Overheating protection temperature at 420
• Stainless steel work plate with ceramic coating provides good chemical-resistant performance
• A wide variety of accessories are available
  
  

  It is widely used in chemical synthesis, physical and chemical analysis, bio-pharmaceuticals etc.

  Key Features

  • Independent heating and stirring control
  • LCD display shows actual temperatures and speed
  • PID controller ensures a precise and steady heating process, Max.temperature up to 340
  • Brushless DC motor enables more powerful speed control
  • External temperature sensor(PT1000) with accuracy at 0.2
  • Overheating protection temperature at 420
  • Stainless steel work plate with ceramic coating provides good chemical-resistant performance
  • A wide variety of accessories are available

• Rocking motion angle 9(R330-Pro) and 7(R1807-S)
• Two options:
• 10kg (R330-Pro)and speed range 10-70rpm
• 2kg(R1807-S)and speed range 10-80rpm
• Double LCDs/LEDs for independent display of time and speed
• Continuous or timer operation mode
• Electronic time switching clock:1min-19h59min
• Wide range of platforms for use with a variety of vessels(R330-Pro)
• Fixed work plate(R1807-S)
• Simple appearance, save operating space
  
  

  Features

  • Rocking motion angle 9(R330-Pro) and 7(R1807-S)
  • Two options:
  • 10kg (R330-Pro)and speed range 10-70rpm
  • 2kg(R1807-S)and speed range 10-80rpm
  • Double LCDs/LEDs for independent display of time and speed
  • Continuous or timer operation mode
  • Electronic time switching clock:1min-19h59min
  • Wide range of platforms for use with a variety of vessels(R330-Pro)
  • Fixed work plate(R1807-S)
  • Simple appearance, save operating space