Swatch cutter 300 mm is accurate& convenient equipmentFor preparing swatches with pinking edges in multiple layers To a depth of 25 mm.

Features -

• Sample up to 300mm width & any length can be cut.
• Depth of the sample up to 25 mm can easily be cut.
• Pinking blade tip gives excellent look of swatches prepared
• New updated table top model.
• Metal body.
• Sample cutting plate(with marking line)
• Cutting blade (imported )
• User friendly handle.

MYQ Notch Cutter for Impact testing is designed to perform a very little stress concentration of notch in the testsamples to make sure that breaking of the sample takes place at the same position each time a test is initiated. Thetesting instrument is specially meant for the use in plastic industry to test plastic polymer materials. The machine iscapable of producing notch profiles to all international test standards like ASTM D256 – 10, ISO 180. It is a samplepreparation machine that prepares the sample for Izod Tester to test the plastic sheets. The instrument is used tomake the notch of the plastic sheets up to 5 mm.

Technical

• The testing instrument is equipped with depth micrometer.
• The range of the machine is 0 to 25mm with the minimum count of 0.01mm.
• The notch cutter cuts the sample from an angle of 45º.
• The power requirement for the laboratory equipment is single phase, 230 Volts, 50 Hz.

Swatch cutter 300 mm is an accurate & convenient equipment for preparing swatches with pinking edges in multiple layers to a depth of 10mm.

Features

• Sample up to 300 mm width & any length can be cut.
• Depth of the sample up to 10mm can easily be cut.
• A sturdy metal stand to keep the equipment stable during operation
• Pinking blade tip gives excellent look of swatches prepared.
• Metal top of the table
• Right side platform (to keep sample for cutting).
• Special cutting plate (Acrylic Plate).
• Cutting blade (imported).
• Handle
• Scale for making samples.

Swatch cutter 400 mm is an accurate & convenient equipment for preparing swatches with pinking edges in multiple layers to a depth of 10mm.

Features

• Sample up to 400 mm width & any length can be cut.
• Depth of the sample up to 10mm can easily be cut.
• A sturdy metal stand to keep the equipment stable during operation
• Pinking blade tip gives excellent look of swatches prepared.
• Metal top of the table
• Right side platform (to keep sample for cutting).
• Special cutting plate (Acrylic Plate).
• Cutting blade (imported).
• Handle
• Scale for making samples.

Swatch cutter 500 mm is an accurate & convenient equipment for preparing swatches with pinking edges in multiple layers to a depth of 10mm.

Features

• Sample up to 500 mm width & any length can be cut.
• Depth of the sample up to 10mm can easily be cut.
• A sturdy metal stand to keep the equipment stable during operation
• Pinking blade tip gives excellent look of swatches prepared.
• Metal top of the table
• Right side platform (to keep sample for cutting).
• Special cutting plate (Acrylic Plate).
• Cutting blade (imported).
• Handle
• Scale for making samples.

Packaging Details

• Main Unit :01 No.
• Special Grade – Cutting Pads: 02 Nos.

Features

• Economical equipment to determine GSM (Grams per square meter) of any type of fabrics
• Good grade of aluminum used in main body for light- weight , robustness & resilience .
• Stainless steel blade holders for lifelong excellent operations.
• Supplied with rubberized foam cutting pad for smooth cutting & long life of the blades

MYQ GSM SMART cutter is a single solid machine with 3 metal cutting wheels perfectly synchronized to get precise 100cms cut. It holds complete grip on fabric with minimum efforts with a smooth rotation the GSM sample will be apart. It has longlasting hardened metal wheels gives you long & smooth cutting life.

Accessories

• Main unit
• Instrument manual
• Calibration certificate.

My Q circular cutter use for various textiles laboratory like- Martindale abrasion test, Pilling test & GSM test from smaller test Fabric. Supplied with GSM pad.

Packaging Details

• Main Unit : 01 No.
• Special Grade – Cutting Pads: 01 Nos.

Features

• Economical equipment to determine GSM (Grams per square meter) of any type of fabrics
• Good grade of aluminum used in main body for light- weight , robustness & resilience .
• Stainless steel blade holders for lifelong excellent operations.
• Supplied with rubberized foam cutting pad for smooth cutting & long life of the blades.

Swatch cutter 300 mm is accurate& convenient equipmentFor preparing swatches with pinking edges in multiple layers To a depth of 25 mm.

Features -

• Sample up to 300mm width & any length can be cut.
• Depth of the sample up to 25 mm can easily be cut.
• Pinking blade tip gives excellent look of swatches prepared
• New updated table top model.
• Metal body.
• Sample cutting plate(with marking line)
• Cutting blade (imported )
• User friendly handle.

MYQ Notch Cutter for Impact testing is designed to perform a very little stress concentration of notch in the testsamples to make sure that breaking of the sample takes place at the same position each time a test is initiated. Thetesting instrument is specially meant for the use in plastic industry to test plastic polymer materials. The machine iscapable of producing notch profiles to all international test standards like ASTM D256 – 10, ISO 180. It is a samplepreparation machine that prepares the sample for Izod Tester to test the plastic sheets. The instrument is used tomake the notch of the plastic sheets up to 5 mm.

Technical

• The testing instrument is equipped with depth micrometer.
• The range of the machine is 0 to 25mm with the minimum count of 0.01mm.
• The notch cutter cuts the sample from an angle of 45º.
• The power requirement for the laboratory equipment is single phase, 230 Volts, 50 Hz.

Swatch cutter 300 mm is an accurate & convenient equipment for preparing swatches with pinking edges in multiple layers to a depth of 10mm.

Features

• Sample up to 300 mm width & any length can be cut.
• Depth of the sample up to 10mm can easily be cut.
• A sturdy metal stand to keep the equipment stable during operation
• Pinking blade tip gives excellent look of swatches prepared.
• Metal top of the table
• Right side platform (to keep sample for cutting).
• Special cutting plate (Acrylic Plate).
• Cutting blade (imported).
• Handle
• Scale for making samples.

Swatch cutter 400 mm is an accurate & convenient equipment for preparing swatches with pinking edges in multiple layers to a depth of 10mm.

Features

• Sample up to 400 mm width & any length can be cut.
• Depth of the sample up to 10mm can easily be cut.
• A sturdy metal stand to keep the equipment stable during operation
• Pinking blade tip gives excellent look of swatches prepared.
• Metal top of the table
• Right side platform (to keep sample for cutting).
• Special cutting plate (Acrylic Plate).
• Cutting blade (imported).
• Handle
• Scale for making samples.

Swatch cutter 500 mm is an accurate & convenient equipment for preparing swatches with pinking edges in multiple layers to a depth of 10mm.

Features

• Sample up to 500 mm width & any length can be cut.
• Depth of the sample up to 10mm can easily be cut.
• A sturdy metal stand to keep the equipment stable during operation
• Pinking blade tip gives excellent look of swatches prepared.
• Metal top of the table
• Right side platform (to keep sample for cutting).
• Special cutting plate (Acrylic Plate).
• Cutting blade (imported).
• Handle
• Scale for making samples.

Packaging Details

• Main Unit :01 No.
• Special Grade – Cutting Pads: 02 Nos.

Features

• Economical equipment to determine GSM (Grams per square meter) of any type of fabrics
• Good grade of aluminum used in main body for light- weight , robustness & resilience .
• Stainless steel blade holders for lifelong excellent operations.
• Supplied with rubberized foam cutting pad for smooth cutting & long life of the blades

MYQ GSM SMART cutter is a single solid machine with 3 metal cutting wheels perfectly synchronized to get precise 100cms cut. It holds complete grip on fabric with minimum efforts with a smooth rotation the GSM sample will be apart. It has longlasting hardened metal wheels gives you long & smooth cutting life.

Accessories

• Main unit
• Instrument manual
• Calibration certificate.

My Q circular cutter use for various textiles laboratory like- Martindale abrasion test, Pilling test & GSM test from smaller test Fabric. Supplied with GSM pad.

Packaging Details

• Main Unit : 01 No.
• Special Grade – Cutting Pads: 01 Nos.

Features

• Economical equipment to determine GSM (Grams per square meter) of any type of fabrics
• Good grade of aluminum used in main body for light- weight , robustness & resilience .
• Stainless steel blade holders for lifelong excellent operations.
• Supplied with rubberized foam cutting pad for smooth cutting & long life of the blades.