MYQ ENGINEERING PVT.LTD

Features :

• Automated sample discharging
• Filling of samples into the drum without removing the drum
• Unique front loading system
• Supports the friabilator and the abrasion drum
• 10 deg till of the bench top as per USP
• Variable speed from 20 to 40 RPM
• Programmable counter/ timer- validation of RPM and count.
• 24 x 2 character LCD display
• Calculation of result like % friability, weight- lost
• RS-232 interface for weighing scale, supports mettle, Sartorius.

• Parallel port for complete test report with validation printout. Real time clock

Features

• Complies with USP, IP, EP specification
• Support USP 1, 2, 5, 6 and intrinsic test method
• Ideal for sustain and controlled released products
• LCD display (20x4 lines)
• Menu driven software with ON-LINE help
• 8 paddle system with SNAP- fit shaft for paddles and baskets
• Vibration free system
• Precise individual vessel centering system
• Moulded clear water bath with sturdy top plate
• Ensure wobble free operation
• Programmable wake-up for temperature control
• Precise individual vessel centering system

• Low Evaporation vessel lid (optional)

• 20 programmable protocols & 12 programmable sampling intervals

• Inside and outside chamber, carrier (s) are fully stainless steel
• Hydraulically die pressed lid from stainless steel
• No flynuts tightening- new safe & user friendly lid locking-single ever lock
• Easy lifting & closing of the LID with assisted support
• Lid interlock for residual pressure
• Easy to access all critical components due to its square modular design
• Spring loaded safety valve
• Independent over temperature cut off.

• Audio & visual alarm for sensor break and low water level alarm.

Details :

• Supports USP I & USP II methods on the same unit
• Menu driven 24 x 2 LCD Display
• Time & date stamp for every test
• Online validation
• Calculation for tap density.
• Calculation for compressibility index
• Calculation for Hauser ratio
• Supports 250 ml & 100 ml cylinders

• Printer for complete documented result with validation report

This apparatus is designed to determine the melting points of solids or boiling points of liquids, with high accuracy. It is supplied with a silicon oil bath with heater the bath. It incorporates a microprocessor based circuitry and key to set the desired program for heating the bath. On pressing the START button, the instrument automatically executes the total program. The temp. Of bath rises fast in the beginning and is automatically controlled in suitable step and adjusts the final rate of heating at 1 °C/Min, towards the melting point. The sample is filled in capillaries and is suspended in the silicon bath through its Teflon cover. The temperature of bath is maintained uniform by a magnetic stirrer.

• Microprocessor-based circuitry, automatically controls ‘Rates of Heating’ in steps with audio signal
• Facility for determination of melting range of substances
• Silicon bath with built-in magnetic stirrer and highly sensitive PT-100 temperature sensor for accurate estimation of melting & boiling Points

Features

• Built in magnetic stirrer with soft touch key speed controller
• Simultaneous display of melting range as MP1 & MP2
• Automatic temperature compensation depending upon heating requirement
• Facility to enter expected melting point by using soft touch keypad
• Push button key to prevent contact problem
• On-site temperature calibration by calibrated thermometer
• Input : electrode connector
• Power supply : 230 volt ± 10%, 50 Hz
• Display > 16 x 2 line backlit LCD display
• Temperature range > +5°C above ambient to 300 °C
• Readability > 1.0°C

• Temperature Accuracy > ±1.0°C, ±10°C above ambient to 300°C

Features :

• Fully micro controlled operation, first time in india
• Simultaneous display of time and vacuum on display module
• Start delay / retention / vacuum hold time can be set as per requirement from 0-999 seconds
• 16 x 2 cm large size numerical from desiccators at the end of the test
• Automatic release of vacuum from desiccators at the end of the test
• Meet USP 28 packing practice specification
• Vacuum & time can be programmed

• Set required vacuum and countdown hold time
• Built in portable, maintenance free, oil free vacuum pump

Features :

• 16 x 2 line backlit LCD display
• Built in magnetic stirrer with soft touch key speed controller
• Rugged Teflon housing provision for holding dual platinum sensor & moisture  trap.
• Automatic end point detection with audio alarm.
• Auto drain facility for cleaning reaction vessel
• OVER TITER audio alarm save KF Reagent.
• Onsite Dispenser calibration / validation facility.

• Dispenser is made up of SS-316 for corrosion protection & maintenance free operation.

Flushing system for cleaning dispensing path