Speed, Simplicity and Affordability
The new OHAUS MB23 and MB25 Basic Moisture Analyzers combine high quality and durable construction into a sleek, compact design. The MB23 and MB25 offer dependable, accurate, results for a wide
variety of applications.

Standard Features Include:

• Flexible Performance –The
• OHAUS MB23 and MB25 provide accurate results at either 0.1% or
• 0.05% readability. And with your choice of infrared or halogen heating, they are ideal for textiles,
• wastewater, ceramics, food and other applications that require IR heating elements and
• measurements to 0.1% or 0.05%.
• Simple to Operate –Set
• up and operation is extremely easy. Just press and hold the temperature
• or time buttons to set drying parameters, add your sample and begin the test process. This makes
• the MB23 and MB25 ideal for routine tasks performed by operators of all skill levels.
• Compact, Easy-to-Clean Design –The
• compact footprint (17 x 13 x 28 cm) of the OHAUS MB23
• and MB25 is designed to take up less space. Their easy-to-clean heating chamber is ideal for
• frequent use and inexpensive maintenance.

Industry Leading Quality and Support
All OHAUS MB Series Moisture Analyzers are manufactured under an ISO 9001:2000 Registered Quality Management System. Our rugged construction and stringent quality control have been hallmarks of all OHAUS products for over a century.

MY Q HYDROSTATIC PRESSURE TESTER (MANUAL MODEL)

Based in Delhi, My Q Instruments has been recognized for offering the best machine calibration service. We have a team of calibration engineers who specialize in ensuring the instruments and machines are calibrated well, exactly for their standard readings and optimum tolerance range. Our team ascertains that all the incorrect measurements are carefully catered to so that production line is not at all compromised and high-quality products can be produced on a timely basis.

Features :

• These ultra low temperature freezers series are developed and manufactured in cooperation with KW, Italy and are ideal for storage of biological, pharmaceutical, plasma and other temperature sensitive material in laboratories and blood bank.
• Silent noise at a distance of 3 meter dose not exceed 55 db
• Large surface condensers with tubeless execution, unique solution that minimizes thermal resistance
• Triple step seal in silicone rubber for gasket prevention against air loss
• Gasket heated by means of the refrigerant pipes – the safest solution against ice formation
• Previous closing

• Password protected security for on/off, temperature set point

Features :

• Powerful and reliable cleaning
• Built-in microprocessor controller
• Selectable use with ultrasonic power controller
• Built- in digital thermometer and timer to set optimum condition for cleaning
• Easy to read operation status on digital display
• Built in drain value unit
• Using a silicon rubber heater for durability and stability
• Built-in alarm function for noticing operation stop
• CE-certified

• Suitable for scientific labs: laboratory glassware, test tube, pipettes, optical and contact lenses, eyeglass frame, components.

Features :

• UV-1800 the highest resolution in the class. The UV-1800 easily satisfies the standards of wavelength resolution demanded by the European Pharmacopoeia.
• Additionally using a spectroscope with a Czerny-Turner mounting result in a compact, bright optical system. Stray light, wavelength repeatability and baseline stability have also been advanced to meet user requirements.

• Offering an array of user-friendly features, the UV-1800 can be used either as a stand-alone instruments a PC-Controlled instruments

My QShade Card-Winding Machine consists of a set of grips between which the card is held with the help of knurling bolts. There is an arrangement of gears to rotate both grips at a time. Yarn is wind over the shade card at equal spacing under a desired tension. The yarns are guided on the shade card with the help of yarn guides, which are moves parallel to the shade card with the help of the worm / worm wheel and cam/ follower mechanism. The guide is positively linked to the rotation of the shade card with the help of the worm/ worm wheel, shaft and cam/ follower mechanism. There are a set of spring loaded adjustable tensioning arrangement provide the desired tension to the yarn. For holding the reels, there is a stand on which the holding pins and guides for yarn etc. are mounted for easy movement of the yarns.

The equipment is built on the fabricated base. It is finished in metallic or deco painting and bright chrome/ zinc plating to give it a corrosion resistance finish.

Features :

• Determination can be performed performed properly and efficiently in the bright field of view under stable light from built in illuminator.
• Dual graduation of refractive index and brix percentage are provided on the internal transparent scale.
• The scale is graduated on upper side for the refractive index and the lower side is graduated to read directly the percentage of sugar in solution.
• The main prism is always horizontal so that liquid can be placed on the prism and measured conveniently

• The glass transparent scale is clearly graduated on the glass plate so that reading can be obtained wisely with fatigue.

• The internal optical system is protected from moisture, in addition to protect the internal optical system by the sealed constructions of the interior portion of the instrument, maintain a dry condition of the moisture adsorbent.

Accuracy - For refractive index 0.001 by direct reading on scale & +0.0001 by estimation. For sugar solution 0.05% by direct reading scale & 0.1% by estimation.

Features :

• Ideal for particle size analysis and separation
• Tri-dimensional sifting motion
• Intermittent and continue sifting motion with 15 programmable levels of amplitude
• Very low noise operation with low maintenance.
• LCD display 16 x 2 line LCD
• Programmable shake time from 1 mint to 99 min
• Suitable for dry and wet sieving
• Capacity upto 8 sieves or up to 16 sieves is available

• Soft start in continuous model

• Test sieves SS are also available from 28 to 4.00mm with calibration certificate

Details :

• Ideal for reliable steaming/ evaporation.
• Fitted with a water level indicating device and a removable flat drop on lid for concentric rings that enables the bath to be used for other work also.
• Control accuracy of ± 1°C in Digital Mode.
• Full Stainless Steel Construction with energy efficient long  life heaters.
• 6 holes of 75 mm Φ with steps of 25 mm
• 12 holes of 75 mm Φ with steps of 25 mm

• 24 holes of 75 mm Φ with steps of 25 mm

The MYQ MAGNETIC STIRRER is specially designed for textile Laboratories to heat liquids continuously at high temperature.

This Evaluation Booard is Designed For evaluation of Smoothness in Appearance of Flat fabric and Seams and the Retention of Pressed Or crease in arments and other Texttile Products after Repeated Home Laundering. this is also Used to Evaluate the Wrinkling Recovery of The fabrics After Undertaking the Wrinkle Recovery test.

Equipment Details
the Myq Viewing Board (aatcc)consists of a Wide Board At 85° with the Cool white fluorescent Lamp Fixed At Top. Aspear 500 watt Flood Lamp with Standard
condition, a Light Shield is also Provided to Minimize the Interference of Flood lamplight Directly Going to the Viewer eye. the Board is Duly Painted as Per grey Chip No.2 of Aatcc Staining Grey scale to Meet the Specification Of american Standards.

Salient Features

• Specially Designed Evaluation Board is Used to Access The rating of Appearance After Repeated Home Laundering comparing with the Standard Replicas.
• And also to Evaluate Crease Comparing with the Standard replicas.
• Specially Designed with Wheel At Base to Move Anywhere.
• It Can also Be Used to Assess Durable Press Rating.
• with 500 Watt Cool White Food Lamp& Light Reflecting shield.
• Additional Attachment to Ascertain the Viewing Position.
• Dimensions &the Colour, Matching with the Grey Chip-2 Of colour Staining Grey Scale Strictly Adheres to The american Standards.
• Supplied with Three Sample /replica Holders & Magnets For fixing Sample On Sample Holder.

Test Method
AATCC- 88B/88C/124/128/143/178

My Q is one of the reputed manufacturers, suppliers, and traders of Home Furnishing Needle Detector.  Massively used for garment, shoes, home furnishing Items and toys, these efficient machines come with  user-friendly operating system. In the proffered series, magnetic induction method is used for detection.

Features:

• Portable
• Rugged in construction
• Easy to maintain

Colour Matching Cabinet is used for Colour Matching under different light sources the equipment is tted with ve Light Sources as per Intemational Standards.

Supplied with

• D-65 - Articial Daylight - 2 No's


• TFL LIGHT - Tungsten Filament - 4 No's (SHOWROOM LIGHT)


• TL-84 Light - Point of Sale - 1 No's


• UVB LIGHT - ULTRA VIOLET - 1 No


• CWF Light - Cool White Florescent - 1 No's


• 45 Degree Angle - l No.


• Hour Meter - 1 No.


• Dimensions - 28 x 18.5 x 23


• Warranty one year


• Calibration Certicate


• Instruction Manual


• Related Standards


• ISO-3664 / BS-950 / DIN-6713 ASTN-Z-8723

A Muffle furnace in historical usage is a furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash. After the development of high temperature electric heating elements and widespread electrification in developed countries, new muffle furnaces quickly moved to electric designs.

• Muffle Furnace Rectangular horizontal, powder coated
• Complete with indicator lamps
• Installed with Digital Temperature Controller

 Details

• Siedentopf observation head inclined at 30 degree rotatable at 360

• Diopter adjustment ring on ocular tube. Interpupillary distance from 55mm to 75mm

• Eyepiece EWF 10x fov 18MM

• Objectives E plans achromatic 4X, 10X, 40X, 100 oil

• Mechanical body – co-axial focusing system. Pre-focusing lever & tension adjustment ring. The slow motion has 1Div = 0.002 mm

• Reverse angle quadruple nosepiece revolves on ball bearing

• Mechanical stage size 125mm x 135mm having low positioned co-axial control on ball bearing

• Built in base illumination system with 6V /20w halogen bulb and power supply

• Cross movement 55mm x 74mm

• Stage condenser-abbe condenser N.A 1.25 swings out filter, iris diaphragm.

• Hidg resolution digital camera eyepiece- high resolution 1282 x 1024 CCD digital camera. It adopt it high performance USB. The transmission speed is 30 f/s.

MYQ  Melt Flow Indexer, often abbreviated as "MFI", is an affordable-price tabletop instrument used to test the melt flow resistance (MFR) of a wide range of thermo-plastic materials. The tester conforms to all National and International melt flow resistance standards, including BS EN ISO 1133 and ASTM D1238. Any temperature within 120°C-450°C (248°F-842°F) can be accurately controlled.

Included weights

• 1 600g
• 1 875g
• 1 960g
• 1 1000g
• 1 1200g
• 1 1640g
• 8 2000g

Features

• Built-in microprocessor maintains temperature control to within ±0.2ºC (±0.4ºF), with rapid ramp-up to set point.
• Temperature fluctuation is ±1% of set temperature.
• Extruded material automatically cut-off by built-in scraper mechanism at preset intervals, controllable to ±0.01 seconds.
• Clear multi-line LCD display and tactile-feedback membrane keypad allow fast, accurate input of test parameters and provide continuous display of settings during testing.

Accessories
The Melt Flow Indexer is supplied with all the accessories and weights necessary for maintenance and operation. Nothing else to buy!

• 2 Piston Rods
• 2 Tungsten Carbide Dies
• 3 Replacement Cut-Off Knives
• 1 Cleaning Tool
• 1 Charging Tool Die Ejector
• 1 Level Meter
• 1 Guide Bushing
• 1 Filling Funnel
• 2 Cylinders
• 1 Die Cleaning Tool

My Q Laboratory Padding Mangle is a versatile laboratory machine with wide applications in Dyeing, Printing & Finishing processes. By simulating the production level process parameters on laboratory scale satisfactory results can be obtained with JK &PC. Padding Mangle. Two bowl Vertical Padding Mangle has bowls coated with synthetic rubber. In standard supply, shore hardness of the rubber is 70 shore hardness.

My Q magna scope is useful to evaluate dyeing, printing , weaving defects or constructional difference in any type of fabrics. Light source from top & bottom facilities in the assessment.

Magnification- 10 x

Total weight 11 kg (approx)

My Q handy metal detector is useful to detect exact position of broken needle or any ferrous particle in garments. Highly accurate, hand held model for spot detecting.

Sensitivity - 1.2 mm

My Q AATCC Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.

Accessories

• Main unit : 1 No.
  
• Calibrated Load (SS 316) : 1 No.
  
• Number of Separator Plates : 21 Nos.

Features of Perspirometer:

• Can also be used for testing color fastness against sea water and water. Made of stainless steel frame.
• Made of stainless steel frame.
• User friendly and corrosion resistant.
• Smooth precision engineered components for excellent performance

Details :

• The vacuum chamber is robust stainless steel supplied with two stainless steel shelves. The chamber is heated by large area heater strapped to its outer surface and insulated with super fine area heater strapped to its outer surface and insulated with super fine mineral wool. A thick toughened glass plate sealing into neoprene rubber gasket closer the chamber. The door closer is screw threaded catch. This system provides excellent vacuum performance, a low outer surface temperature and operator safety in the unlikely event of the glass inner door breaking. The outer case in mild steel tough stove enamel white painted or stainless steel.
• Vacuum control one diaphragm valve and vacuum gauge are provided. The valve, which are intended for vacuum connection and the admission of either dry air or inert atmosphere, have nozzle conveniently located. The oven can be operated and the admission of either dry air or inert atmosphere, have nozzle conveniently located. The oven can be operated at any pressure less than the atmospheric. Oven temperature is controlled by Digital PID Temperature Indicating controller. Control panel consists of vacuum gauge, power panel, heating indicator suitable to work on 220/230 volts, A.C 50 cycles.

• System will be supplied with in-built vacuum oil free pump.

Details :

• The Refrigerated Circulating baths with a special control module provide excellent accuracy & uniformity essential for most demanding application in the temperature range of -10°C to +120°C (Accuracy -0.1°C). These heating cooling baths are ideal for both immersing sample & circulating controlled temperature liquid to external equipments.
• Extremely compact single table top- save bench and under – table space.
• Eliminates all the unwieldiness and hassles of using a separate bath &chiller.
• Built in circulator pumps to external devices.
• It offers highest level of performance, flexibility and control for the most demanding application.
• Quiet operation.
• Wide operation.
• Ideal for rotational viscosity test spectrophotometer, Refratometers, Electrophoresis isoelectric Focusing, calibration, Chromatogarphy, condensers, Densitometer, Polarimeter and general laboratory Cooling.
• Refrigerated bath provides heating and cooling.

• Models available in 6 liters & 20 liters capacity.

Delhi Based, My Q Instruments has been recognized for offering the best machine repairing service. We are working with an affluence of technical expertise and professionalism, our provided solutions comply with the codes of international quality norms. We have a team of engineers who are specialize in ensuring the machines are repaired well, exactly for their standard readings and optimum tolerance range.

We are the main supplier of this product.

We are the main supplier of this product.

Speed, Simplicity and AffordabilityThe new OHAUS MB23 and MB25 Basic Moisture Analyzers combine high quality and durable construction into a sleek, compact design. The MB23 and MB25 offer dependable, accurate, results for a widevariety of applications.

Standard Features Include:

• Flexible Performance –The
• OHAUS MB23 and MB25 provide accurate results at either 0.1% or
• 0.05% readability. And with your choice of infrared or halogen heating, they are ideal for textiles,
• wastewater, ceramics, food and other applications that require IR heating elements and
• measurements to 0.1% or 0.05%.
• Simple to Operate –Set
• up and operation is extremely easy. Just press and hold the temperature
• or time buttons to set drying parameters, add your sample and begin the test process. This makes
• the MB23 and MB25 ideal for routine tasks performed by operators of all skill levels.
• Compact, Easy-to-Clean Design –The
• compact footprint (17 x 13 x 28 cm) of the OHAUS MB23
• and MB25 is designed to take up less space. Their easy-to-clean heating chamber is ideal for
• frequent use and inexpensive maintenance.

Industry Leading Quality and SupportAll OHAUS MB Series Moisture Analyzers are manufactured under an ISO 9001:2000 Registered Quality Management System. Our rugged construction and stringent quality control have been hallmarks of all OHAUS products for over a century.

MY Q HYDROSTATIC PRESSURE TESTER (MANUAL MODEL)

Based in Delhi, My Q Instruments has been recognized for offering the best machine calibration service. We have a team of calibration engineers who specialize in ensuring the instruments and machines are calibrated well, exactly for their standard readings and optimum tolerance range. Our team ascertains that all the incorrect measurements are carefully catered to so that production line is not at all compromised and high-quality products can be produced on a timely basis.

Features :

• These ultra low temperature freezers series are developed and manufactured in cooperation with KW, Italy and are ideal for storage of biological, pharmaceutical, plasma and other temperature sensitive material in laboratories and blood bank.
• Silent noise at a distance of 3 meter dose not exceed 55 db
• Large surface condensers with tubeless execution, unique solution that minimizes thermal resistance
• Triple step seal in silicone rubber for gasket prevention against air loss
• Gasket heated by means of the refrigerant pipes – the safest solution against ice formation
• Previous closing

• Password protected security for on/off, temperature set point

Features :

• Powerful and reliable cleaning
• Built-in microprocessor controller
• Selectable use with ultrasonic power controller
• Built- in digital thermometer and timer to set optimum condition for cleaning
• Easy to read operation status on digital display
• Built in drain value unit
• Using a silicon rubber heater for durability and stability
• Built-in alarm function for noticing operation stop
• CE-certified

• Suitable for scientific labs: laboratory glassware, test tube, pipettes, optical and contact lenses, eyeglass frame, components.

Features :

• UV-1800 the highest resolution in the class. The UV-1800 easily satisfies the standards of wavelength resolution demanded by the European Pharmacopoeia.
• Additionally using a spectroscope with a Czerny-Turner mounting result in a compact, bright optical system. Stray light, wavelength repeatability and baseline stability have also been advanced to meet user requirements.

• Offering an array of user-friendly features, the UV-1800 can be used either as a stand-alone instruments a PC-Controlled instruments

My QShade Card-Winding Machine consists of a set of grips between which the card is held with the help of knurling bolts. There is an arrangement of gears to rotate both grips at a time. Yarn is wind over the shade card at equal spacing under a desired tension. The yarns are guided on the shade card with the help of yarn guides, which are moves parallel to the shade card with the help of the worm / worm wheel and cam/ follower mechanism. The guide is positively linked to the rotation of the shade card with the help of the worm/ worm wheel, shaft and cam/ follower mechanism. There are a set of spring loaded adjustable tensioning arrangement provide the desired tension to the yarn. For holding the reels, there is a stand on which the holding pins and guides for yarn etc. are mounted for easy movement of the yarns.

The equipment is built on the fabricated base. It is finished in metallic or deco painting and bright chrome/ zinc plating to give it a corrosion resistance finish.

Features :

• Determination can be performed performed properly and efficiently in the bright field of view under stable light from built in illuminator.
• Dual graduation of refractive index and brix percentage are provided on the internal transparent scale.
• The scale is graduated on upper side for the refractive index and the lower side is graduated to read directly the percentage of sugar in solution.
• The main prism is always horizontal so that liquid can be placed on the prism and measured conveniently

• The glass transparent scale is clearly graduated on the glass plate so that reading can be obtained wisely with fatigue.

• The internal optical system is protected from moisture, in addition to protect the internal optical system by the sealed constructions of the interior portion of the instrument, maintain a dry condition of the moisture adsorbent.

Accuracy - For refractive index 0.001 by direct reading on scale & +0.0001 by estimation. For sugar solution 0.05% by direct reading scale & 0.1% by estimation.

Features :

• Ideal for particle size analysis and separation
• Tri-dimensional sifting motion
• Intermittent and continue sifting motion with 15 programmable levels of amplitude
• Very low noise operation with low maintenance.
• LCD display 16 x 2 line LCD
• Programmable shake time from 1 mint to 99 min
• Suitable for dry and wet sieving
• Capacity upto 8 sieves or up to 16 sieves is available

• Soft start in continuous model

• Test sieves SS are also available from 28 to 4.00mm with calibration certificate

Details :

• Ideal for reliable steaming/ evaporation.
• Fitted with a water level indicating device and a removable flat drop on lid for concentric rings that enables the bath to be used for other work also.
• Control accuracy of ± 1°C in Digital Mode.
• Full Stainless Steel Construction with energy efficient long  life heaters.
• 6 holes of 75 mm Φ with steps of 25 mm
• 12 holes of 75 mm Φ with steps of 25 mm

• 24 holes of 75 mm Φ with steps of 25 mm

The MYQ MAGNETIC STIRRER is specially designed for textile Laboratories to heat liquids continuously at high temperature.

This Evaluation Booard is Designed For evaluation of Smoothness in Appearance of Flat fabric and Seams and the Retention of Pressed Or crease in arments and other Texttile Products after Repeated Home Laundering. this is also Used to Evaluate the Wrinkling Recovery of The fabrics After Undertaking the Wrinkle Recovery test.

Equipment Detailsthe Myq Viewing Board (aatcc)consists of a Wide Board At 85° with the Cool white fluorescent Lamp Fixed At Top. Aspear 500 watt Flood Lamp with Standardcondition, a Light Shield is also Provided to Minimize the Interference of Flood lamplight Directly Going to the Viewer eye. the Board is Duly Painted as Per grey Chip No.2 of Aatcc Staining Grey scale to Meet the Specification Of american Standards.

Salient Features

• Specially Designed Evaluation Board is Used to Access The rating of Appearance After Repeated Home Laundering comparing with the Standard Replicas.
• And also to Evaluate Crease Comparing with the Standard replicas.
• Specially Designed with Wheel At Base to Move Anywhere.
• It Can also Be Used to Assess Durable Press Rating.
• with 500 Watt Cool White Food Lamp& Light Reflecting shield.
• Additional Attachment to Ascertain the Viewing Position.
• Dimensions &the Colour, Matching with the Grey Chip-2 Of colour Staining Grey Scale Strictly Adheres to The american Standards.
• Supplied with Three Sample /replica Holders & Magnets For fixing Sample On Sample Holder.

Test MethodAATCC- 88B/88C/124/128/143/178

My Q is one of the reputed manufacturers, suppliers, and traders of Home Furnishing Needle Detector.  Massively used for garment, shoes, home furnishing Items and toys, these efficient machines come with  user-friendly operating system. In the proffered series, magnetic induction method is used for detection.

Features:

• Portable
• Rugged in construction
• Easy to maintain

Colour Matching Cabinet is used for Colour Matching under different light sources the equipment is tted with ve Light Sources as per Intemational Standards.

Supplied with

• D-65 - Articial Daylight - 2 No's
• TFL LIGHT - Tungsten Filament - 4 No's (SHOWROOM LIGHT)
• TL-84 Light - Point of Sale - 1 No's
• UVB LIGHT - ULTRA VIOLET - 1 No
• CWF Light - Cool White Florescent - 1 No's
• 45 Degree Angle - l No.
• Hour Meter - 1 No.
• Dimensions - 28 x 18.5 x 23
• Warranty one year
• Calibration Certicate
• Instruction Manual
• Related Standards
• ISO-3664 / BS-950 / DIN-6713 ASTN-Z-8723

A Muffle furnace in historical usage is a furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash. After the development of high temperature electric heating elements and widespread electrification in developed countries, new muffle furnaces quickly moved to electric designs.

• Muffle Furnace Rectangular horizontal, powder coated
• Complete with indicator lamps
• Installed with Digital Temperature Controller

 Details

• Siedentopf observation head inclined at 30 degree rotatable at 360

• Diopter adjustment ring on ocular tube. Interpupillary distance from 55mm to 75mm

• Eyepiece EWF 10x fov 18MM

• Objectives E plans achromatic 4X, 10X, 40X, 100 oil

• Mechanical body – co-axial focusing system. Pre-focusing lever & tension adjustment ring. The slow motion has 1Div = 0.002 mm

• Reverse angle quadruple nosepiece revolves on ball bearing

• Mechanical stage size 125mm x 135mm having low positioned co-axial control on ball bearing

• Built in base illumination system with 6V /20w halogen bulb and power supply

• Cross movement 55mm x 74mm

• Stage condenser-abbe condenser N.A 1.25 swings out filter, iris diaphragm.

• Hidg resolution digital camera eyepiece- high resolution 1282 x 1024 CCD digital camera. It adopt it high performance USB. The transmission speed is 30 f/s.

MYQ  Melt Flow Indexer, often abbreviated as "MFI", is an affordable-price tabletop instrument used to test the melt flow resistance (MFR) of a wide range of thermo-plastic materials. The tester conforms to all National and International melt flow resistance standards, including BS EN ISO 1133 and ASTM D1238. Any temperature within 120°C-450°C (248°F-842°F) can be accurately controlled.

Included weights

• 1 600g
• 1 875g
• 1 960g
• 1 1000g
• 1 1200g
• 1 1640g
• 8 2000g

Features

• Built-in microprocessor maintains temperature control to within ±0.2ºC (±0.4ºF), with rapid ramp-up to set point.
• Temperature fluctuation is ±1% of set temperature.
• Extruded material automatically cut-off by built-in scraper mechanism at preset intervals, controllable to ±0.01 seconds.
• Clear multi-line LCD display and tactile-feedback membrane keypad allow fast, accurate input of test parameters and provide continuous display of settings during testing.

AccessoriesThe Melt Flow Indexer is supplied with all the accessories and weights necessary for maintenance and operation. Nothing else to buy!

• 2 Piston Rods
• 2 Tungsten Carbide Dies
• 3 Replacement Cut-Off Knives
• 1 Cleaning Tool
• 1 Charging Tool Die Ejector
• 1 Level Meter
• 1 Guide Bushing
• 1 Filling Funnel
• 2 Cylinders
• 1 Die Cleaning Tool

My Q Laboratory Padding Mangle is a versatile laboratory machine with wide applications in Dyeing, Printing & Finishing processes. By simulating the production level process parameters on laboratory scale satisfactory results can be obtained with JK &PC. Padding Mangle. Two bowl Vertical Padding Mangle has bowls coated with synthetic rubber. In standard supply, shore hardness of the rubber is 70 shore hardness.

My Q magna scope is useful to evaluate dyeing, printing , weaving defects or constructional difference in any type of fabrics. Light source from top & bottom facilities in the assessment.

Magnification- 10 x

Total weight 11 kg (approx)

My Q handy metal detector is useful to detect exact position of broken needle or any ferrous particle in garments. Highly accurate, hand held model for spot detecting.

Sensitivity - 1.2 mm

My Q AATCC Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.

Accessories

• Main unit : 1 No.
  
• Calibrated Load (SS 316) : 1 No.
  
• Number of Separator Plates : 21 Nos.

Features of Perspirometer:

• Can also be used for testing color fastness against sea water and water. Made of stainless steel frame.
• Made of stainless steel frame.
• User friendly and corrosion resistant.
• Smooth precision engineered components for excellent performance

Details :

• The vacuum chamber is robust stainless steel supplied with two stainless steel shelves. The chamber is heated by large area heater strapped to its outer surface and insulated with super fine area heater strapped to its outer surface and insulated with super fine mineral wool. A thick toughened glass plate sealing into neoprene rubber gasket closer the chamber. The door closer is screw threaded catch. This system provides excellent vacuum performance, a low outer surface temperature and operator safety in the unlikely event of the glass inner door breaking. The outer case in mild steel tough stove enamel white painted or stainless steel.
• Vacuum control one diaphragm valve and vacuum gauge are provided. The valve, which are intended for vacuum connection and the admission of either dry air or inert atmosphere, have nozzle conveniently located. The oven can be operated and the admission of either dry air or inert atmosphere, have nozzle conveniently located. The oven can be operated at any pressure less than the atmospheric. Oven temperature is controlled by Digital PID Temperature Indicating controller. Control panel consists of vacuum gauge, power panel, heating indicator suitable to work on 220/230 volts, A.C 50 cycles.

• System will be supplied with in-built vacuum oil free pump.

Details :

• The Refrigerated Circulating baths with a special control module provide excellent accuracy & uniformity essential for most demanding application in the temperature range of -10°C to +120°C (Accuracy -0.1°C). These heating cooling baths are ideal for both immersing sample & circulating controlled temperature liquid to external equipments.
• Extremely compact single table top- save bench and under – table space.
• Eliminates all the unwieldiness and hassles of using a separate bath &chiller.
• Built in circulator pumps to external devices.
• It offers highest level of performance, flexibility and control for the most demanding application.
• Quiet operation.
• Wide operation.
• Ideal for rotational viscosity test spectrophotometer, Refratometers, Electrophoresis isoelectric Focusing, calibration, Chromatogarphy, condensers, Densitometer, Polarimeter and general laboratory Cooling.
• Refrigerated bath provides heating and cooling.

• Models available in 6 liters & 20 liters capacity.

Delhi Based, My Q Instruments has been recognized for offering the best machine repairing service. We are working with an affluence of technical expertise and professionalism, our provided solutions comply with the codes of international quality norms. We have a team of engineers who are specialize in ensuring the machines are repaired well, exactly for their standard readings and optimum tolerance range.

We are the main supplier of this product.

We are the main supplier of this product.