Features :

Weather Monitoring Station With 8 Channel Touch Screen Data Logger
• Monitors 6 parameters• Wind speed• wind direction• Temperature, • Relative humidity• Rainfall• Barometric PressureSensor

Specification: -• Wind Velocity & Direction TransmitterVelocity Range : 5 To 180 Kmtr /HrDirection : 0 To 360 Deg From North• Air temperature & Humidity SensorRain• Rainfall Sensor• Barometric Pressure Sensor

Specifications: - 6 Channel Data Logger - MYKO

Model No. : MK-8-DLInput : Universal Input (0 –5VDC, 4 – 20 mA, 0 – 20 mA) Input SignalStorage : 25000 reading per channel storageOnboard USB PortOutput : RS 485Memory : 100 MBAlarm : Individual Provided HI/LO AlarmWith 3.5 Inch touch screen DisplayRead system type - 32 Bit Operating type System(If only one channel used reading per channel willbe 50000)With Software

Model:MK-PHP-40

Range : Generation of Pressure : 40 bar

Generation of Vacuum : 0.95 bar

Medium :DryAir

EndConnectionForMaster:1/4"BSP(F)

Digital pressure gauge

MODEL :HP Series

Display : Alpha Numeric Display

Range : As Per Required

Resolution: 0.001 bar

Accuracy: ±0.1% of F.S.

Instrument Casting : SS304

Battery Backup : 200 hours

Process connection: 1⁄4” BSP (M)

Power Supply : 4 x 1.5 V Alkaline Battery

HSN/SAC: 90262000

Features :

• 8 universal input ( RTD. Thermocouple, 0-5Vdc, 0-20mA or 4-20 mA input signals.
• Onboard 32000 reading per channel storage .
• Parallel Port
• Individual HI / LO alarm with 2 relay outputs
• Additional relay outputs with optional Relay card
• Networkable using Ethernet Port (optional)
• Free PC Based Data Acquisition software
• 21 CFR Part 11 (optional)
• Front end IP65 protection
• 3.5 inch TFT with Touch Screen Control
• Onboard USB Port (Memory stick)

Specifications

Applications :

• Highly reliable and accurate fuel consumption measurement in trucks, Tankers, Infrastructure and Construction machinery, agriculture machinery, river boats and diesel engine.
• It define you an accurate consumption of fuel so difficult to theft fuel from vehicle

Features :

• Indicate total fuel consumption, Indicate total fuel supply toward engine, Indicate total fuel return from engine.
• Indicate total time of fuel supply, Indicate total time of Fuel return, Indicate total time of Fuel consumption.
• Indicate fuel consumption, supply fuel and return fuel flow rate : litter/hour.
• Total filling, Total consume, and balance fuel in tank

Three conial beaded edged cups 50 mm. In diameter, attached by arms to a central boss drive a vertical spindle at a rotary speed proportional to the wind velocity.

Aluminum, Brass and Stainless Steel are used throughout this instrument to ensure freedom from corrosion and long working life. A conical shield  protects the spindle and bearing from the rain.

An Infra Red Transducer connected to the vertical shaft gives pulses proportional to the number of rotations of the vertical shaft.

This signal is carried through interconnecting cable ( standard length 20 mtrs.) to the Transmitter unit.

4 - 20 mA OR 0 - 5 Volts Dc output proportional to the wind velocity is provided which can be fed to any Data Logger or PLC.

Hydraulic Hand Pump (MK-HP-700)

Model : MK-HP-700

Range : Generation of Pressure : 700 bar

Medium : Oil / Water

End Connection For Master : 1/4 " BSP (F)

For Gauge To Be Calibrated

Mechanical Oval Gear Flow Meter

Model : MK-MOGFM

Media : Diesel

Type : B (Cumulative total + Resettable total)

Maximum Working Pressure : 2 MPa

Accuracy : 0.5% FSD

Fluid & Ambient Temperature : -40 to 100°C

Repeatability : 0.03%

Viscosity : 1000 cps maximum

Rotor and casting : Cast iron

O-ring : NBR/VITON/SILICON

Shaft : Stainless Steel

Line size : As Per Required

Flow Range : -----------

LowPressureScrewPump(MK-LPSP)

Model : MK-LP-Cal

Range : 1/2/6 Bar

Generation of Vacuum : - 0.6 barMedium :DryAir

EndConnectionForMaster:1/4"BSP(F)

HSNCode:84136020

MYKO 500 MK Series transducers are ideally used to convert current or voltage input signal to a nearly proportional pneumatic output pressure. This versatile instrument is rugged and reliable force balance transducers for use in both process control and industrial applications, for standard process control applications which typically utilise 3 to 15psig output and industrial & high pressure application which typically utilise pressure output up to 120 psig.

MYKO 500MK Series transducers combines low cost, high accuracy and minimum air consumption with field proven technology. Versatile design features and rugged, compact housing with a choice of CMRI and ATEX* approved versions for explosion proof or intrinsically safe operation when used with a suitable barrier.

Principle of Operation
MYKO 500 MK Series transducer is a force balance device in which, when electrical current is passed through the coil of transducer magnetic field is created which acts on the magnet assembly, casuing the anvi & diaphragm to move away from or forward the nozzle (flapper nozzle) depending on the direction of current flow. Motion at the nozzle assembly is proportional to the amount of current passing through the coil.

The flapper/anvil move away from or forward towards the nozzle creates back pressure which acts as pilot pressure to an integral booster relay. when input electrical current increases (or decreases for reverse acting) causes proportional output pressure increases.

Zero and Span are calibrated by turning easily accessible adjusting screws on the front face of the unit. The zero adhusting screw causes the nozzle to move relative to the flapper/anvil. The span adjusting screw is a potentiometer that limits the current through the coil. A thermistor circuit in series with the coil provides temperature compensation.

Integrated Characteristics

• Compact Design.
• Low Air Consumption.
• Integral Volume Booster-flow capacity up to 20 SCFM is boosted by the built in Volume booster.
• Field Reversible – Output provides inversely proportional to input signal.
• Flexible Adjustments of Zero & Span.
• Standard Process Inputs.
• Split Ranging
• NEMA 4X (Ip65) Enclosure - Optional

Applications
500MK Series transducers converts electrical signal to a pneumatic output which can be used to operate the fallowings :

• Valve, Valve-Actuators,
• Damper and Louver Actuators
• Valve Positioners
• Air-Cylinders
• Relays
• Clutches
• Web Tensioners and Brakes

Used in :

• Petrochemical Processing Systems
• Energy Management
• HVAC Systems
• Textile Processing Systems
• Pharmaceutical Processing System
• Clutches
• Pulp and Paper Handling Controls

Features :

• MEASUREMENTS: Electrical measurements of mA & Volts. Peak pressure measurements (High & Low peak)
• PRESSURE SWITCH TEST FACILITY: Opening and closing pressures are easily identified by display hold while opening and closing contact
• DISPLAY: Large backlit alpha numeric display with 2 lines (one line Pressure and second line for electrical measurement) . ‘Auto OFF’ function for longer battery life
• KEYPAD: Feather Touch keypad for easy operation . Dedicated ZERO key for Zeroing before test

A Flow switch is normally a simple device that monitors flow and sends a trip signal to another device such as a Pump to protect it. Flow switches are used for Pump protection, Cooling Circuit protection, high & low flow rate alarm and general flow monitoring.

Digital Pressure Gauge

Model : LC Series

Make : MYKO

Range : As Per Required

Process connection: 1⁄4” BSP (M)

Accuracy:± 0.5% FS

Digital Pressure Transmitter

Make : MYKO

Model : MK-PX5-D

Range.As Per Required

Output : 4-20 mA

Process connection 1/4 BSP male

Accuracy : ± 0. 5% F.S

Max Temp : 125°C

Supply : 24 V DC

Mechanical Water meter

Make : Belanto

Line Size : As Per request

Connection : Flange , Class B

Float mounted at one end of rigid rod moves with change in level, magnetic capsule at other end of rod moves accordingly within fixed limits Switch contacts across the face change accordingly. As the tank fills up the float lifts up due to buoyancy. The other end of the float which is magnetic in nature goes down and during its downward motion, triggers the switch assembly and the contacts get closed, which can be used to operate an alarm or any other audio/visual load.

Table Top Comparison Test Pump

Range : Generation Of Pressure : 700 Bar

Medium : Water or Hydraulic Oil

End connection Of Master 1⁄4 BSP (F)

Flexible Hose With 1⁄4 BSP (F) For Gauge

To Be Calibrated

Highlights :

• Scaleable 0-5 V, type J or K output
• Wide -20°C to 500°C (-4°F to 932°F) temperature range
•  Rugged IP 65 (NEMA-4) stainless steel housing
• Rugged 13:1 optics at 90% energy
• 150 mSec (95%) response time
• Alarm output
• Sensor status/self diagnostic indicator LED
• RS232 digital communications for sensor set-up and monitoring
• Adjustable signal processing
• DataTemp® Multidrop software compatible
• Accessories for air purging and lens protection

A totally new, reliable and accurate system for liquid level measurement in tall and overhead tanks. Highly efficient and rugged in construction, this instrument is very suitable for large storage tanks for Water, Fire Water, DM Water, Oil, LSHS, Diesel, Lube Oil, Vegetable Oils, Molasses, Silicates, Glucose, All Non-Hazard, Non- Pressurised tanks. As the liquid rises in the tank, the large float also goes up, in turn moving the pointer on the graduated scale. The float is connected to the pointer with the wire rope which glides over almost frictionless nylon rollers, thereby ensuring trouble free operation.

Features :

• Dry Block


• Graphical Display


• Microcontroller Based


• Feather Touch Key Pad


• Fast Heating & Cooling


• Reads Set temperature and device input simultaneously


• Good Stability


• Loop Power Supply for Transmitters


• Facility to check Temperature Switch Test


• Measurement Facility for RTD, Thermocouple, mV, V, mA, Ohms


• Internal Cold Junction Compensation

A Top Mounted Magnetic Level switch is normally a simple device that monitors the liquid level in a tank and sends a trip signal to another device such as a Pump to protect it. These Level switches are used for Pump protection, Cooling Circuit protection, high & low level alarm and general level monitoring.

It is an instrument used to measure instant flow rate of Liquids and Gases. It is installed in the pipe line vertically upward with flanged or screwed connection.

Simple principle of mechanics and magnetism harnessed to offer an absolutely safe, reliable and trustworthy level indicator for dangerous and toxic liquids under high pressure and temperature.

As the liquid level rises in the tank, the float is lifted up due to buoyancy. The float carries a stem attached to it and on the other side of the stem a magnet is fixed. The float stem moves inside an SS enclosure. External to this enclosure is a glass tube, which carries the magnetic follower (Red in Colour). Due to magnetic attraction, the magnet on the float stem and the magnetic follower are coupled and move in union. As the float moves along with the liquid, the follower also moves inside the glass tube, and the position of the follower can be read against the scale.

Features :

Weather Monitoring Station With 8 Channel Touch Screen Data Logger
• Monitors 6 parameters• Wind speed• wind direction• Temperature, • Relative humidity• Rainfall• Barometric PressureSensor

Specification: -• Wind Velocity & Direction TransmitterVelocity Range : 5 To 180 Kmtr /HrDirection : 0 To 360 Deg From North• Air temperature & Humidity SensorRain• Rainfall Sensor• Barometric Pressure Sensor

Specifications: - 6 Channel Data Logger - MYKO

Model No. : MK-8-DLInput : Universal Input (0 –5VDC, 4 – 20 mA, 0 – 20 mA) Input SignalStorage : 25000 reading per channel storageOnboard USB PortOutput : RS 485Memory : 100 MBAlarm : Individual Provided HI/LO AlarmWith 3.5 Inch touch screen DisplayRead system type - 32 Bit Operating type System(If only one channel used reading per channel willbe 50000)With Software

Model:MK-PHP-40

Range : Generation of Pressure : 40 bar

Generation of Vacuum : 0.95 bar

Medium :DryAir

EndConnectionForMaster:1/4"BSP(F)

Digital pressure gauge

MODEL :HP Series

Display : Alpha Numeric Display

Range : As Per Required

Resolution: 0.001 bar

Accuracy: ±0.1% of F.S.

Instrument Casting : SS304

Battery Backup : 200 hours

Process connection: 1⁄4” BSP (M)

Power Supply : 4 x 1.5 V Alkaline Battery

HSN/SAC: 90262000

Features :

• 8 universal input ( RTD. Thermocouple, 0-5Vdc, 0-20mA or 4-20 mA input signals.
• Onboard 32000 reading per channel storage .
• Parallel Port
• Individual HI / LO alarm with 2 relay outputs
• Additional relay outputs with optional Relay card
• Networkable using Ethernet Port (optional)
• Free PC Based Data Acquisition software
• 21 CFR Part 11 (optional)
• Front end IP65 protection
• 3.5 inch TFT with Touch Screen Control
• Onboard USB Port (Memory stick)

Specifications

Applications :

• Highly reliable and accurate fuel consumption measurement in trucks, Tankers, Infrastructure and Construction machinery, agriculture machinery, river boats and diesel engine.
• It define you an accurate consumption of fuel so difficult to theft fuel from vehicle

Features :

• Indicate total fuel consumption, Indicate total fuel supply toward engine, Indicate total fuel return from engine.
• Indicate total time of fuel supply, Indicate total time of Fuel return, Indicate total time of Fuel consumption.
• Indicate fuel consumption, supply fuel and return fuel flow rate : litter/hour.
• Total filling, Total consume, and balance fuel in tank

Three conial beaded edged cups 50 mm. In diameter, attached by arms to a central boss drive a vertical spindle at a rotary speed proportional to the wind velocity.

Aluminum, Brass and Stainless Steel are used throughout this instrument to ensure freedom from corrosion and long working life. A conical shield  protects the spindle and bearing from the rain.

An Infra Red Transducer connected to the vertical shaft gives pulses proportional to the number of rotations of the vertical shaft.

This signal is carried through interconnecting cable ( standard length 20 mtrs.) to the Transmitter unit.

4 - 20 mA OR 0 - 5 Volts Dc output proportional to the wind velocity is provided which can be fed to any Data Logger or PLC.

Hydraulic Hand Pump (MK-HP-700)

Model : MK-HP-700

Range : Generation of Pressure : 700 bar

Medium : Oil / Water

End Connection For Master : 1/4 " BSP (F)

For Gauge To Be Calibrated

Mechanical Oval Gear Flow Meter

Model : MK-MOGFM

Media : Diesel

Type : B (Cumulative total + Resettable total)

Maximum Working Pressure : 2 MPa

Accuracy : 0.5% FSD

Fluid & Ambient Temperature : -40 to 100°C

Repeatability : 0.03%

Viscosity : 1000 cps maximum

Rotor and casting : Cast iron

O-ring : NBR/VITON/SILICON

Shaft : Stainless Steel

Line size : As Per Required

Flow Range : -----------

LowPressureScrewPump(MK-LPSP)

Model : MK-LP-Cal

Range : 1/2/6 Bar

Generation of Vacuum : - 0.6 barMedium :DryAir

EndConnectionForMaster:1/4"BSP(F)

HSNCode:84136020

MYKO 500 MK Series transducers are ideally used to convert current or voltage input signal to a nearly proportional pneumatic output pressure. This versatile instrument is rugged and reliable force balance transducers for use in both process control and industrial applications, for standard process control applications which typically utilise 3 to 15psig output and industrial & high pressure application which typically utilise pressure output up to 120 psig.

MYKO 500MK Series transducers combines low cost, high accuracy and minimum air consumption with field proven technology. Versatile design features and rugged, compact housing with a choice of CMRI and ATEX* approved versions for explosion proof or intrinsically safe operation when used with a suitable barrier.

Principle of Operation
MYKO 500 MK Series transducer is a force balance device in which, when electrical current is passed through the coil of transducer magnetic field is created which acts on the magnet assembly, casuing the anvi & diaphragm to move away from or forward the nozzle (flapper nozzle) depending on the direction of current flow. Motion at the nozzle assembly is proportional to the amount of current passing through the coil.

The flapper/anvil move away from or forward towards the nozzle creates back pressure which acts as pilot pressure to an integral booster relay. when input electrical current increases (or decreases for reverse acting) causes proportional output pressure increases.

Zero and Span are calibrated by turning easily accessible adjusting screws on the front face of the unit. The zero adhusting screw causes the nozzle to move relative to the flapper/anvil. The span adjusting screw is a potentiometer that limits the current through the coil. A thermistor circuit in series with the coil provides temperature compensation.

Integrated Characteristics

• Compact Design.
• Low Air Consumption.
• Integral Volume Booster-flow capacity up to 20 SCFM is boosted by the built in Volume booster.
• Field Reversible – Output provides inversely proportional to input signal.
• Flexible Adjustments of Zero & Span.
• Standard Process Inputs.
• Split Ranging
• NEMA 4X (Ip65) Enclosure - Optional

Applications
500MK Series transducers converts electrical signal to a pneumatic output which can be used to operate the fallowings :

• Valve, Valve-Actuators,
• Damper and Louver Actuators
• Valve Positioners
• Air-Cylinders
• Relays
• Clutches
• Web Tensioners and Brakes

Used in :

• Petrochemical Processing Systems
• Energy Management
• HVAC Systems
• Textile Processing Systems
• Pharmaceutical Processing System
• Clutches
• Pulp and Paper Handling Controls

Features :

• MEASUREMENTS: Electrical measurements of mA & Volts. Peak pressure measurements (High & Low peak)
• PRESSURE SWITCH TEST FACILITY: Opening and closing pressures are easily identified by display hold while opening and closing contact
• DISPLAY: Large backlit alpha numeric display with 2 lines (one line Pressure and second line for electrical measurement) . ‘Auto OFF’ function for longer battery life
• KEYPAD: Feather Touch keypad for easy operation . Dedicated ZERO key for Zeroing before test

A Flow switch is normally a simple device that monitors flow and sends a trip signal to another device such as a Pump to protect it. Flow switches are used for Pump protection, Cooling Circuit protection, high & low flow rate alarm and general flow monitoring.

Digital Pressure Gauge

Model : LC Series

Make : MYKO

Range : As Per Required

Process connection: 1⁄4” BSP (M)

Accuracy:± 0.5% FS

Digital Pressure Transmitter

Make : MYKO

Model : MK-PX5-D

Range.As Per Required

Output : 4-20 mA

Process connection 1/4 BSP male

Accuracy : ± 0. 5% F.S

Max Temp : 125°C

Supply : 24 V DC

Mechanical Water meter

Make : Belanto

Line Size : As Per request

Connection : Flange , Class B

Float mounted at one end of rigid rod moves with change in level, magnetic capsule at other end of rod moves accordingly within fixed limits Switch contacts across the face change accordingly. As the tank fills up the float lifts up due to buoyancy. The other end of the float which is magnetic in nature goes down and during its downward motion, triggers the switch assembly and the contacts get closed, which can be used to operate an alarm or any other audio/visual load.

Table Top Comparison Test Pump

Range : Generation Of Pressure : 700 Bar

Medium : Water or Hydraulic Oil

End connection Of Master 1⁄4 BSP (F)

Flexible Hose With 1⁄4 BSP (F) For Gauge

To Be Calibrated

Highlights :

• Scaleable 0-5 V, type J or K output
• Wide -20°C to 500°C (-4°F to 932°F) temperature range
•  Rugged IP 65 (NEMA-4) stainless steel housing
• Rugged 13:1 optics at 90% energy
• 150 mSec (95%) response time
• Alarm output
• Sensor status/self diagnostic indicator LED
• RS232 digital communications for sensor set-up and monitoring
• Adjustable signal processing
• DataTemp® Multidrop software compatible
• Accessories for air purging and lens protection

A totally new, reliable and accurate system for liquid level measurement in tall and overhead tanks. Highly efficient and rugged in construction, this instrument is very suitable for large storage tanks for Water, Fire Water, DM Water, Oil, LSHS, Diesel, Lube Oil, Vegetable Oils, Molasses, Silicates, Glucose, All Non-Hazard, Non- Pressurised tanks. As the liquid rises in the tank, the large float also goes up, in turn moving the pointer on the graduated scale. The float is connected to the pointer with the wire rope which glides over almost frictionless nylon rollers, thereby ensuring trouble free operation.

Features :

• Dry Block


• Graphical Display


• Microcontroller Based


• Feather Touch Key Pad


• Fast Heating & Cooling


• Reads Set temperature and device input simultaneously


• Good Stability


• Loop Power Supply for Transmitters


• Facility to check Temperature Switch Test


• Measurement Facility for RTD, Thermocouple, mV, V, mA, Ohms


• Internal Cold Junction Compensation

A Top Mounted Magnetic Level switch is normally a simple device that monitors the liquid level in a tank and sends a trip signal to another device such as a Pump to protect it. These Level switches are used for Pump protection, Cooling Circuit protection, high & low level alarm and general level monitoring.

It is an instrument used to measure instant flow rate of Liquids and Gases. It is installed in the pipe line vertically upward with flanged or screwed connection.

Simple principle of mechanics and magnetism harnessed to offer an absolutely safe, reliable and trustworthy level indicator for dangerous and toxic liquids under high pressure and temperature.

As the liquid level rises in the tank, the float is lifted up due to buoyancy. The float carries a stem attached to it and on the other side of the stem a magnet is fixed. The float stem moves inside an SS enclosure. External to this enclosure is a glass tube, which carries the magnetic follower (Red in Colour). Due to magnetic attraction, the magnet on the float stem and the magnetic follower are coupled and move in union. As the float moves along with the liquid, the follower also moves inside the glass tube, and the position of the follower can be read against the scale.