GST : 27AAECM7911R1ZT
Verified
Write a Review
Our Products
Calibrators And Monitoring Systems
2 Products availableMagnetic Switch
2 Products availableSensors
2 Products availableRotameters
2 Products availableCalibrators
2 Products availableCapacitance Level Indicator, Switch And Transmitter is ideally suitable for level measurement and control of liquids and some slurries of homogenous composition having a stable dielectric constant. The performance of these instruments is not affected by the properties of the liquid such as conductivity, corrosiveness and viscosity.
Features :
Weather Monitoring Station With 8 Channel Touch Screen Data Logger
• Monitors 6 parameters• Wind speed• wind direction• Temperature, • Relative humidity• Rainfall• Barometric PressureSensor
Specification: -• Wind Velocity & Direction TransmitterVelocity Range : 5 To 180 Kmtr /HrDirection : 0 To 360 Deg From North• Air temperature & Humidity SensorRain• Rainfall Sensor• Barometric Pressure Sensor
Specifications: - 6 Channel Data Logger - MYKO
Model No. : MK-8-DLInput : Universal Input (0 –5VDC, 4 – 20 mA, 0 – 20 mA) Input SignalStorage : 25000 reading per channel storageOnboard USB PortOutput : RS 485Memory : 100 MBAlarm : Individual Provided HI/LO AlarmWith 3.5 Inch touch screen DisplayRead system type - 32 Bit Operating type System(If only one channel used reading per channel willbe 50000)With Software
Model:MK-PHP-40
Range : Generation of Pressure : 40 bar
Generation of Vacuum : 0.95 bar
Medium :DryAir
EndConnectionForMaster:1/4"BSP(F)
Digital pressure gauge
MODEL :HP Series
Display : Alpha Numeric Display
Range : As Per Required
Resolution: 0.001 bar
Accuracy: ±0.1% of F.S.
Instrument Casting : SS304
Battery Backup : 200 hours
Process connection: 1⁄4” BSP (M)
Power Supply : 4 x 1.5 V Alkaline Battery
HSN/SAC: 90262000
Additional Information:
Delivery Time : 1 WEEK
Features:
Additional Information:
Delivery Time : 1 week
Features :
Benefits :
Specifications
| Certification | CE Certified |
| Voltage | 230V |
| Type | Paperless |
| Warranty | 1 Year |
Table Top Comparison Test Pump
Range : Generation Of Pressure : 700 Bar
Medium : Water or Hydraulic Oil
End connection Of Master 1⁄4 BSP (F)
Flexible Hose With 1⁄4 BSP (F) For Gauge
To Be Calibrated
Applications :
Features :
Three conial beaded edged cups 50 mm. In diameter, attached by arms to a central boss drive a vertical spindle at a rotary speed proportional to the wind velocity.
Aluminum, Brass and Stainless Steel are used throughout this instrument to ensure freedom from corrosion and long working life. A conical shield protects the spindle and bearing from the rain.
An Infra Red Transducer connected to the vertical shaft gives pulses proportional to the number of rotations of the vertical shaft.
This signal is carried through interconnecting cable ( standard length 20 mtrs.) to the Transmitter unit.
4 - 20 mA OR 0 - 5 Volts Dc output proportional to the wind velocity is provided which can be fed to any Data Logger or PLC.
Hydraulic Hand Pump (MK-HP-700)
Model : MK-HP-700
Range : Generation of Pressure : 700 bar
Medium : Oil / Water
End Connection For Master : 1/4 " BSP (F)
For Gauge To Be Calibrated
LowPressureScrewPump(MK-LPSP)
Model : MK-LP-Cal
Range : 1/2/6 Bar
Generation of Vacuum : - 0.6 barMedium :DryAir
EndConnectionForMaster:1/4"BSP(F)
HSNCode:84136020
Additional Information:
Payment Terms : T/T
Delivery Time : within 2 days
MYKO 500 MK Series transducers are ideally used to convert current or voltage input signal to a nearly proportional pneumatic output pressure. This versatile instrument is rugged and reliable force balance transducers for use in both process control and industrial applications, for standard process control applications which typically utilise 3 to 15psig output and industrial & high pressure application which typically utilise pressure output up to 120 psig.
MYKO 500MK Series transducers combines low cost, high accuracy and minimum air consumption with field proven technology. Versatile design features and rugged, compact housing with a choice of CMRI and ATEX* approved versions for explosion proof or intrinsically safe operation when used with a suitable barrier.
Principle of OperationMYKO 500 MK Series transducer is a force balance device in which, when electrical current is passed through the coil of transducer magnetic field is created which acts on the magnet assembly, casuing the anvi & diaphragm to move away from or forward the nozzle (flapper nozzle) depending on the direction of current flow. Motion at the nozzle assembly is proportional to the amount of current passing through the coil.
The flapper/anvil move away from or forward towards the nozzle creates back pressure which acts as pilot pressure to an integral booster relay. when input electrical current increases (or decreases for reverse acting) causes proportional output pressure increases.
Zero and Span are calibrated by turning easily accessible adjusting screws on the front face of the unit. The zero adhusting screw causes the nozzle to move relative to the flapper/anvil. The span adjusting screw is a potentiometer that limits the current through the coil. A thermistor circuit in series with the coil provides temperature compensation.
Integrated Characteristics
Applications500MK Series transducers converts electrical signal to a pneumatic output which can be used to operate the fallowings :
Used in :
Graph
Click Here To View More Detail
Mechanical Oval Gear Flow Meter
Model : MK-MOGFM
Media : Diesel
Type : B (Cumulative total + Resettable total)
Maximum Working Pressure : 2 MPa
Accuracy : 0.5% FSD
Fluid & Ambient Temperature : -40 to 100°C
Repeatability : 0.03%
Viscosity : 1000 cps maximum
Rotor and casting : Cast iron
O-ring : NBR/VITON/SILICON
Shaft : Stainless Steel
Line size : As Per Required
Flow Range : -----------
A Flow switch is normally a simple device that monitors flow and sends a trip signal to another device such as a Pump to protect it. Flow switches are used for Pump protection, Cooling Circuit protection, high & low flow rate alarm and general flow monitoring.
Features :
I/P Convertor 18 Non-FLP
Make : ABB
Model no.-TEIP11-PS
Type : V18311H-1829101
Input- 4-20 mA
Output- 0.2- 1 kg/cm2(3-15 psi)
Click Here To View More Detail
Catalogue
Temperature control is a process in which change of temperature of a space (and objects collectively there within) is measured or otherwise detected, and the passage of heat energy into or out of the space is adjusted to achieve a desired average temperature.
Float mounted at one end of rigid rod moves with change in level, magnetic capsule at other end of rod moves accordingly within fixed limits Switch contacts across the face change accordingly. As the tank fills up the float lifts up due to buoyancy. The other end of the float which is magnetic in nature goes down and during its downward motion, triggers the switch assembly and the contacts get closed, which can be used to operate an alarm or any other audio/visual load.
Mechanical Water meter
Make : Belanto
Line Size : As Per request
Connection : Flange , Class B
Digital Pressure Gauge
Model : LC Series
Make : MYKO
Range : As Per Required
Process connection: 1⁄4” BSP (M)
Accuracy:± 0.5% FS
Highlights :
ML-TR-800 series of level transmitter feature reliable and highly accurate liquid level measurement for water, diesel and gasoline and mild corrosive liquid.
This series adopt stainless steel housing, high performance sensor, and ASIC to ensure a wide range of applications.
Vented inside cable are provided as air reference. The products have been approved with intrinsic safety certificate, explosion proof certificate and CE certificate.
Applications :
Graph
Click Here To View More Detail
A totally new, reliable and accurate system for liquid level measurement in tall and overhead tanks. Highly efficient and rugged in construction, this instrument is very suitable for large storage tanks for Water, Fire Water, DM Water, Oil, LSHS, Diesel, Lube Oil, Vegetable Oils, Molasses, Silicates, Glucose, All Non-Hazard, Non- Pressurised tanks. As the liquid rises in the tank, the large float also goes up, in turn moving the pointer on the graduated scale. The float is connected to the pointer with the wire rope which glides over almost frictionless nylon rollers, thereby ensuring trouble free operation.
Pressure Transmitter With Controller
Media : Water
Make : MYKO
Model : MK - PX5
Range : 0 to 2 Bar
Output : 4 20 mA
Process connection: 1/4 BSP male
Temp : Max 125 D C
Accuracy: 0.25 % F.S
Supply : 9 35 V DC
Controller
Size : 98*96
Input : 4 -20 mA
Output : 2 Relay
Transmitter Supply : 24 V DC,
Supply : 230 V AC
Features :
A Top Mounted Magnetic Level switch is normally a simple device that monitors the liquid level in a tank and sends a trip signal to another device such as a Pump to protect it. These Level switches are used for Pump protection, Cooling Circuit protection, high & low level alarm and general level monitoring.
Digital Pressure Transmitter
Make : MYKO
Model : MK-PX5-D
Range.As Per Required
Output : 4-20 mA
Process connection 1/4 BSP male
Accuracy : ± 0. 5% F.S
Max Temp : 125°C
Supply : 24 V DC
It is an instrument used to measure instant flow rate of Liquids and Gases. It is installed in the pipe line vertically upward with flanged or screwed connection.
We are offering rotameter. A rotameter is a device that measures the flow rate of liquid or gas in a closed tube.
Simple principle of mechanics and magnetism harnessed to offer an absolutely safe, reliable and trustworthy level indicator for dangerous and toxic liquids under high pressure and temperature.
As the liquid level rises in the tank, the float is lifted up due to buoyancy. The float carries a stem attached to it and on the other side of the stem a magnet is fixed. The float stem moves inside an SS enclosure. External to this enclosure is a glass tube, which carries the magnetic follower (Red in Colour). Due to magnetic attraction, the magnet on the float stem and the magnetic follower are coupled and move in union. As the float moves along with the liquid, the follower also moves inside the glass tube, and the position of the follower can be read against the scale.
Ms. Mahejabeen Khan (Myko Electronics Pvt. ltd.)
204, B-2, Sakivihar Complex, Sakinaka, Saki Vihar, Mumbai, Maharashtra - 400072
https://www.mykoelectronics.in
Share us via
View Contact Number 
