Myriad Industrial Solutions LLP

Mumbai, Maharashtra

Compact micro-ohmmeter MIKO -10

FEATURES AND BENEFITS:

• Wide functionality and high accuracy of the measurements 0.2%
• 3 modes of resistance measurement
• Additional automatic functions
• Test current up to 10 A
• Wide range of accessories
• Built-in battery, portability and reliability
• 3 ways to fasten the instrument

MIKO-10 enables measurements at following objects:

• High-voltage or auto circuit breakers;
• Releasing, connecting or disconnecting switches, contactors and relays;
• Bolted, welded and brazed joints of current leadsand busbars;
• Rail connections and wagon wheel pairs;
• Electric motors, generators, compensators, and
• other objects (metallic bonding resistance measurement)

Different measurement modes are implemented in the instrument:

AUTO: is intended for contact resistance measurement of HV circuit breakers w/o CT and any demountable or non-demountable connections on test current 10 A. The measurement starts automatically by the circuit closing;

SINGLE: is intended for contact resistance measurement of HV circuit breakers w/o CT and any demountable or non-demountable connections on current 1 A or 10 A. The easurement starts bythe User command;

BUILT-IN CT: is intended for contact resistance measurement of HV circuit breakers with CT on current

10 A. The measurement starts by the User command.

Visualizing of gas leak position makes it easy to find with a glance

Features

• Small and lightweight! One hand operation available!
• New TFT LCD for easy detection outdoors!
• Newly equipped "Approximate Leak Amount Displaying Function"!
• Specifies leak position in wide range in short time.
• Detects gas leak from a distance.
• Suitable for elevated pipes. Optional waist bag* for easy portabilit

Weighs about 750 gm including batteries.

Field application examples:

Detect gas leak from pin-holes created by corrosion on pipe.

Detect gas leak from regulator joints. Detect gas leak from welder air-tube.

Detect leaks caused by deteriorated seals and loose flanges.

Detect leaks from sections with welding defects.

Detect suction into vacuum pipes.

*Type of gases does not matter if it is air, steam, nitrogen, argon, or any other kind of gas!

*MK-750ST may be unable to detect depending on detection environment

Procured from the reliable manufacturers, our Telescopic Hot Sticks are fabricated using the most advanced electrical grade insulated fiberglass. They are acclaimed for their strength, lightweight, and ability to withstand the rigors of daily use and misuse. Featuring round shape, Telescopic Hot Sticks are available in eight different sizes from 16’ to 50’, English or Metric versions. They facilitate easy and accurate measuring while still functioning as a normal telescoping hot stick. In addition, they are resistant to water absorption owing to the premium coating of epoxy resin on their fiberglass construction.  Further, Telescopic Hot Sticks are made available in two formats, Ground Operable and Bucket Operable. 
Formats Available :

• Ground Operable BLUE STRIPE telescopic hot sticks are available from 5 ft to 50 ft length in various lengths with 5 ft stick is single section and the 50 ft stick is 11 sections.
• Bucket Operable blue stripe hot sticks are available from 4 ft to 12 ft

The Medium Voltage Circuit Breaker Analyzer is developed for professionals and is meant for medium voltage circuit breakers. The Medium Voltage Circuit Breaker Analyzer fully tests and analyzes medium voltage circuit breakers. Expanding contact timing tests to include travel results, the Medium Voltage Circuit Breaker Analyzer weighs 8.6 kg/17 lb and it is known for being versatile and precise. The company is a highly acclaimed Exporter and Supplier of Medium Voltage Circuit Breaker Analyzers.

 

Features :

• Three contact input modules of SA5 are designated to be used as main contact channels, and three are designated for auxiliary contact use. It is possible however, by using BTS11, to dedicate any of the six channels to handle either.

• Number of main contact timing channels : 3(6)

• Number of auxiliary contact channels : 3

• Coils and motor : Automatically measures circuit breaker coil and motor current / voltage. Together with an adjustable power unit it is very easy to perform minimum function voltage test on the coils.
• The SA5 uses 1 analogue channel to measure coil voltage and current and 1 channel to measure motor voltage and current. For the coil, 35 A AC/DC is possible for continuous measurement, and for the motor, 50A AC/DC. However, if necessary, higher currents will pass for shorter periods.

• Motion measurements : The SA5 supports both analogue and digital transducers. A wide range of transducer fastenings can also be supplied. Elcon International is the official worldwide supplier of transducer fastenings for ABB Breakers.
• Number of digital transducer inputs : 1
• Number of analogue transducer inputs : 1
• Analog inputs : All in all, the SA5 has 9 analogue inputs, however since our intention is to provide you with a test equipment that is user-friendly and circuit breaker oriented, they have been preset to handle specific relevant functions such as coil and motor voltages, currents, analog motion transducers etc.

• Communication : Standard RS232 communication is default. However, in order to comply with safety regulations an optional Bluetooth interface is available, which allows the user to take his laptop pc and move up to 100 m (328 ft) away from the test-object.

Our Circuit Breaker Analyzer is used to analyze dynamic and static characteristics of Extra High voltage circuit breakers. User can analyze operating times, coil currents, Motor currents, Travel, velocity, Contact resistance and dynamic contact resistance.

The High Voltage Circuit Breaker Analyzer is rugged and compact and it is meant for professional circuit-breaker analysis. The High Voltage Circuit Breaker Analyzer can work with high and extra high voltage with switch analyzer SA10 and it has a built-in micro ohmmeter or ductor for measuring static and dynamic breaker pole resistance. The High Voltage Circuit Breaker Analyzer weighs 11.6 kg/26 lb and it offers versatility and precision in testing circuit breakers, while withstanding extreme high induction in substations.

 

Features :

• The well-known powerful analyzing software BTS11 included
• Built in a small metal carrying case
• Fully compatible with our factory line test equipment
• No panel switches, just two push buttons: Open and Close
• Supports both digital and analogue transducers
• The only field test equipment with a built-in micro ohm measuring function. 200A!
• Possibility to use the "first trip" analyzing method
• Weighs only 11, 6 kg/26 lb
• Automatic measurement of coil and motor current/voltage
• Designed for both offline and online analysis of circuit breakers

State of the art Protection relay test kits with different hardware configuration are available based on applicaiton. The test kits are based on plug in module technology and are easy to maintain. Some models have integrated front panel display and keyboard , others have to be operated through Laptop/ PC. Many advance features are available in PC based software . Calibration is also possible through software.

Features

We offer new generation intelligent high-current generator. Power, electrical industry needs a large current output in testing and debugging necessary equipment. Intelligent High current generator is widely used in power companies, power plants, power distribution stations, electrical factories and research institutes other departments.Features:1. Current, Voltage, time, status information are displayed on 4.7 large-screen LCD, and is very easy and clear to read. 2. Interface is in English, operation is very simple, can be used in a variety of applications; 3. All operations of the intelligent current generator are through front panel mounted keypad. All functions can be set via key pad and hence it improves the product safety and reliability. 4. Calibration is fully digital, no potentiometers are involved, it is extremely site friendly with password protection; 5. All status messages/ warnings are presented on the display and hence operation is possible without skilled manpower. 6. When the test is going on High voltage sign is continuously flashing on the display and adds to the safety of the operator.7. Pause function provides flexibility in operation. Rise and fall of current can be paused any time this it gives the operator to chance to observe the response of the test object to the injected current.

When to use this test set When you are interested in Performance and accuracy testing of single-phase grounded or non-grounded instrument voltage transformers of 0.2 accuracy class (or less accuracy class ) with 50-Hz frequency rated from 6kv to 220 The Test Set is suitable for primary (post-manufacture) or regular testing of transformers in load points defined by the standard or under an actual load on the secondary side of the VT under test;

Avail from us the best quality Transformer Frequency Response Analyzer. It is used to check the structural changes in winding structure. The analyzer does that by way of applying a voltage at one end of the winding and measuring the voltage at the other end at different frequencies. Transformer Frequency Response Analyzer is also efficient in measuring low voltage parameters and short circuit Impedance.  

Voltage Measurement Specifications :

• Input voltage measurement Measuring range 25V—500V
• Maximum voltage 600V
• Basic accuracy 0.1%
• External PT transformation ratio 110000

Current Measurement Specifications :

• Input current measurement  Measuring range 0.5A—50A
• Maximum current 60A
• Basic accuracy 0.1%
• External CT transformation ratio 110000
• Impedance measurement specifications
• Impedance range 0100…
• Impedance measurement accuracy 0.1

Power measurement specifications :

• Power Measurement  Measuring range 15W—10kW
• Active power 0.2 0.5

Major technical specifications :

• Test Host and PC Interface : USB or Ethernet.

• Excitation source:
  • Frequency Range : 10Hz 10MHz
  • Output Voltage : +/-10V, at 50 Ω.
  • Two high-speed : AD conversion channel parallel
  • Measuring range100dB0dB
  • Accuracy : 0.5dB100dB20dB
  • Acquisition : channel input impedance 1MΩ50Ω

• Scanning Distribution with linear or logarithmic sweep measurement
• Scanning Frequency Accuracy Sinusoidal signal source output signal frequency accuracy of less than 0.01%
• Swept frequency measurements10Hz 10MHz
• Number of Points : not less than 2000 Measurement points of measurement
• Meets the International standards for the power industryDLT911-2004
• Power Supply : AC220V±10%(50Hz)
• Operating temperature : 20ƒ60ƒ
• Relative Humidity : 10%90%
• HR1800E tester also measures low voltage parameters and short circuit Impedance
• Major technical specifications of low voltage measurement function of theHR1800E

• Voltage measurement specifications:
  • Input voltage measurementMeasuring range25V—500V
  • External PT transformation ratio : 10000
  • Current measurement specifications·: Input current measurement Measuring range0.5A—50A

• Impedance measurement specifications
  • Impedance range0100…
  • Impedance measurement accurac
  • Power measurement specifications· Power Measurementï Measuring range 15W—10k

Protection relays are of different kinds. Differenctial relayDistance relayfrequency relayOver current relayOver voltage relay

AC / DC Leakage current probe facilitatesLong Time Record of Measurement by Input Power SupplyFacilitates Detection of Both AC Current and DC Current At a timeFacilitates Detection of minute DC current Inside Large AC CurrentFreely Bending with Flexible Clamp Sensor of Inside Diameter 200mmUseful for difficult to Access Locations with Wide Ranges up to AC/DC 1000A

Three Phase Grounding Tool . Contact us with your detailed requirement . Imported from reputed manufactureres, Safety is not compromised.

Our high-precision Gas Leak Detector is designed for various outdoor applications and it meets IP65 requirements. Gas Leak Detector that we offer is used for indicating measured values and state of the system. The user-friendly menu of our Gas Leak Detector allows changing of operation modes, measurement units, recording measured values into system memory, etc. Our Gas Leak Detector is provided with a monitoring mode and USB interface for establishing connection to PC. It features the automatic function of subtracting the background concentration. Gas Leak Detector does not require additional transportation packaging owing to its high-impact watertight plastic case. Further, it is provided with all types of accessories like removable intakes, filters, and tweezers for changing filters.

 

Applications :

• Energy Distribution :SF6 LaserGasTest® was designed especially for precise detection of SF6 leaks in high-voltage gas-insulated switch-gear (HV GIS).SF6 LaserGasTest® can be used for quality control needs in manufacturing HV GIS, as well as while technical maintenance of already installed GIS.
• Military :Another one application of SF6 LaserGasTest® is precise leak control in gas-insulated RF waveguides.
• Medicine : SF6 gas is certified for medical applications as a biologically neutral substance. SF6 LaserGasTest® was successfully used in thoracic surgery for localization of smallest holes in lungs. Use of SF6 LaserGasTest® showed its advantages in comparison with traditional method and equipment. This application is experimental.
• Detection of gas leakage is an essential technology in many areas, especially when dealing with greenhouse gases.
• The patented working principle allows a sensitivity of up to 1×10-8 cm3/sec (0, 02g/year) for SF6.
• The device is portable, light-weighted and can run up to 6 hours battery driven.

 

Manufactured By

• Hypertech Laser Systems GmbH
• Maria-Goeppert Str. 1
• D-23562 Lübeck
• Germany

320 x 240 pixelsPanoramic Shooting ModeUser Vibration alarm within handle32 x 24 Wide View AngleImage Fusion - Parallel, SyntheticJPEG with data to SD Card10cm Macro ModeUser friendly display with icon GUISupplied with NS9500 Lite SoftwareIdeal for Predictive/preventative maintenance and building inspectionsHard Case, Battery Pack, Battery Charger, Ac Adapter, Wristband, Operation Manual

Easy power management by USB flash memory MPR-601W is a measuring and recording instrument for Voltage, Current, Active power and Power factor up to three phase 4wire power system. These factors are indispensable for your power management and can be stored in USB flash memory.Simply pull out USB flash memory from the recorder and insert it to USB port of PC. You can observe the recorded data easily without complex download work. FEATURES

Latest 4G LTE ready Android mobile with Thermal Imager (FLIR) Suitable for electrical maintenance, Building thermal imaging, Medical applications, Electronic product servicing etc. The first of its kind, the Cat S60 utilizes MSX Technology exclusive to FLIR. This rugged device captures shareable clear thermal imagery, video and even time-lapse footage. Multiple spot meters allow to retroactively pin point a temperature in image .It save thermal image instantly conveniently.

Summary: Most accurate instrument available for such application till now.Is least affected by external magnetic field.It indicates deterioration in quality of insulation of Lightening Arresters. Features : ALCL-40 is designed to test the diagnostic of OXIDE SURGE ARRESTER. The least influence from the external magnetic field and noise by triple shielding of CT.Compliant with IEC6099-5.Enabled with the measurement resolution of 100nA and harmonics current. GENERAL Lightning arresters are designed to protect a power distribution system by shunting to ground the high voltage surges caused by lightning.ALCL-40 measures to warn that an arrester is damaged or deteriorating and should not be energized.

Our establishment in Maharashtra(India) is well connected by varied modes of transport. Thus, we are capable of reaching patrons with ease. We are a reliable name when it comes to high quality electrical safety tools at competitively low prices.

We are based in Maharashtra(India) and ensure to make available the entire range of products to any required destination. Buy from us the extensive array of Infrared Camera; we are counted amidst the leading Suppliers in the sphere.

Backed by our dexterous professionals, we have emerged as a nonpareil Supplier and Exporter of High Voltage Indicators from Maharashtra, India.  The High Voltage Indicators we make available features user-friendly construction for overhead lines and long functional life. The entire range of the Voltage Indicators is quality-tested at our vendor’s end before the final dispatch. Owing to our reliable sourcing network, we are capable of delivering bulk orders of High Voltage Indicators within stipulated time.

Details

• ARCUSBASIC : Tested to IEC 61243-1, with visual indication. The state of voltage is indicated by LEDs. This product series was specially developed for switchgear and overhead line requirements up to Un=24 kV. It features high quality at low cost.
• ARCUSDETECT M : Tested to IEC 61243-1, with visual and audible indication. The ARCUSDETECT M series is specially developed for the medium voltage range (up to Un=36 kV).
• ARCUSDETECT H : Tested to IEC 61243-1, with visual and audible indication. ARCUSDETECT H is specially developed for the high voltage range (up to Un=420 kV).
• ARCUSDISTANT : User-friendly construction for overhead lines 110-380 kV (distance voltage detector)

Our company specializes in exporting and supplying precision engineered High Voltage Capacitors. Specifically designed to be the part of different types of measuring equipment, the High Voltage Capacitors are known for their supreme quality, high reliability and elevated durability.  High Voltage Capacitors find wide application in power industries, which include high-voltage labs, industrial plants, and power substations.

Models available :

• IHCs-10
• IHCs-35
• IHCs-110
• IHCs-220
• IHCs-330

 

Application :

• Electrical testing of various products meant for industrial applications (e.g. HV insulation tests including transformer oil)
• Providing traceability of measurements (calibration of instrument capacitors, voltage transformers and voltage dividers of 0.2 – 0.5 accuracy classes or less accurate).

Current measurements of terminal feeder, AC 1A200A, 23mmCompact sizeAC 1A200ACurrent measurements of terminal feeder

SPECIFICATIONSWithstanding Voltage AC 1000V, 1 minute (between CT and output)Insulation Resistance DC500V, More than 100M (between CT and output)Operating Temperature 040 Less than 80%RH Without condensationPower supply Button cell LR-44x2CT Inside Size 30mmOutput Cable 1.2m cable with banana plugsDimension 4414621mmWeight 100gsMeasuring Range DC 1A200A