West Mumbai, Maharashtra, India GST : 27AAZFM0054B1ZB Verified Supplier
We are leaders in the market for providing best range of Transformer Winding Resistance Tester, High Voltage Cable Tester, clamp earth tester, Power Transducer Tester and Energy Meter Tester (3.3)
Our organization is a budding Exporter and Supplier of Transformer Winding Resistance Tester based in Maharashtra. Designed for large power transformers and medium power transformers with on load tap changers, the Transformer Winding Resistance Tester is known for its high efficiency, accurate reading, reliability, and durability. It is suitable for measuring in charged substation as well as in the manufacturing plant. Available at market leading prices, our Transformer Winding Resistance Tester comes in different models to suit diverse requirements of our customers.
We offer High Voltage Cable Tester that is fully computer controlled. It is used as a pass or fail test for cables. Small size, lightweight, large screen LCD, test report, and easy usage are the prime highlights of our High Voltage Cable Tester. Available at very feasible prices, High Voltage Cable Tester comes in different specifications to suit all the requirements of our customers.
Highlighting Features :
Data of current and voltage are obtained directly through the sampling of High-Voltage side and it is true and accurate.
Over-voltage protection: the instrument will shut down to protection within 20 ms when the output voltage is exceeding limiting values of setting.
Over-current protection: designed for dual protection of high and low voltage, downtime protection can be accurately set in high-voltage side. Shut down to protection times is within 20 ms when the current of low-voltage sides exceeds reacted current.
High-voltage output protection resistor design in inbuilt and there is no need of additional external resistor.
Body Boost 55
Based in Maharashtra, India, we are #1 Exporter & Supplier of Power Transducer Tester in the Indian and overseas market. The main configuration of our PTC9300H Tester is a computerized 3-phase power source with built-in precision reference instrument. It sets new industry standards in the field of test & calibration measurements. Owing to its wide usage, we make it available in different technical specifications. For reasonable prices and timely deliveries, trust us!
PTC9300H fulfills three Important functions :
PTC9300H features software control system with multiple micro-processors fully integrated to produce highly stable 3 phase power outputs and reference readings. All control and selection functions are digitally accessible from the PTC 9300H's front control panel or optionally through a RS232 port to a remote PC. Test functions, results and file management are easily performed with the proprietary software. The PTC9300H's VFD illuminated display screen allows for clear readings and menu command operation.
Voltage Output :
Current Output :
Energy Meter Tester (3.3) is designed to generate three or single-phase system of current/voltage signals according to a user-specified signal model. Energy Meter Tester has harmonic range from 0th to 50th. Our Energy Meter Tester is widely acknowledged for providing accurate results and flawless functionality.
Sphere of applications :
Output Setting Range, by phase:
1st harmonic frequency, Hz
Phase; Phase angle between 1st and nth voltage harmonics of the same phase; Phase angle between 1st and nth current harmonics of the same phase, Angular degrees
Harmonic composition, of the signal
Power instability (during 1 minute or less ), %
Power output of:
voltage source, V.A
Compliant with IEC6099-5 standards, our Third Harmonic Leakage Current Testers have high accuracy and precision. Our company’s name figures in the list of reliable Suppliers and Exporters of Third Harmonic Leakage Current Testers from Maharashtra, India. The Third Harmonic Leakage Current Testers offered by us are least affected by external magnetic field and it indicates deterioration in quality of insulation of Lightening Arresters. Bulk orders of the Current Testers are catered by us.
|Testing Parameters||1. Waveform of Total Leakage Current||5. RMS and Peak Value of Fundamental Wave|
2. Capacitive Current Wave
|6. RMS of Fundamental Component for Resistive Leakage Current and
3, 5, 7 times RMS
|3. PT Voltage RMS||7. Peak Value of Resistive Leakage Current Component: Ir+ and Ir-|
|4. Power Consumption of Arrester||8. Phase angle difference of Total Voltage and Total Current|
|Dimensions||Host: 360 *260 *140mm Accessories Case: 420 *330 *200 mm|
|Weight||Host: 5kg Accessories Case: 9kg|
Handheld Digital Insulation Resistance Tester is featured with a big digital and bar graph LCD display having back light that enables easy observation. Our Handheld Digital Insulation Resistance Tester is useful when working in dark places. Handheld Digital Insulation Resistance Tester is a hand-free and continuous measurement system with custom made switch. It features a safe design with in-built automatic discharging function for any capacitors present in the circuit.The voltage in the circuit or capacitor can be checked by warning lamp for safe insulation measurements. Handheld Digital Insulation Resistance Tester features data hold and auto power off function. It is available in compact, lightweight, and heavy duty rugged case.
|Display||3 1/2-digit LCD; 4000 count; backlight-illuminated; logarithmic bar graph; extension bar graph-no fluctuations, as the display shows the digits of a reading in the order in which each digit settles.|
|Comparator Function||The MY40 alerts you by turning on the LOW symbol and sounding the buzzer if the measured value is smaller than the reference value. You can allocate as many as three user-defined reference values to each rating. The factory-set defaults are 0.1 MΩ, 0.2 MΩ and 0.4 MΩ.|
|Memory Function||For each rating, you can save as many as 20 measurements at desired memory address numbers.|
|Automatic Discharge Function||The MY40 automatically begins discharge when you turn off the MEAS switch. You can monitor the state of discharge by checking the bar graph and make sure discharge is complete by checking that the segment bar disappear.|
|High-Voltage Indicators||The high-voltage symbol and LED lamp come on to alert you when the MY40 is in insulation testing mode or if any voltage remains to be discharged.|
|Live-Line Alarm||If you apply an AC voltage of approximately 40 V or higher across the input terminals, the MY40 alerts you by blinking the LED lamp and sounding the buzzer.|
|Overrange Input Alarm||If the voltage being measured exceeds 600 V during AC voltage measurement, the MY40 alerts you by flashing the Maximum Value indicator and sounding the buzzer.|
|Auto-Hold Function||The tester retains the measured resistance for approximately 5 seconds after the MEAS switch is turned off.|
|Batteries||Four AA (R6P) batteries|
|Ambient Temperature/Humidity Ranges||23 ±5 /45-75% RH|
Handheld Analog Insulation Resistance Tester that we offer is featured with single and fluorescent scale indicator for three ranges insulation measurement that enables easy observation. Used for working in dark place, our Handheld Analog Insulation Resistance Tester provides continuous measurements and available along with custom made switch. Handheld Analog Insulation Resistance Tester has a safe design with built-in automatic discharging function. The voltage in the circuit can be pre-checked without any switch operation for safe insulation measurements. It is available in compact, lightweight, and heavy duty rugged case.
|Effective Measuring Range||0.01-20MΩ|
|Central Scale Value||0.5MΩ|
|AC Voltage Measurement||0 to 250 V|
|Rated Current||1-1.2 mA|
|Approx. Overall Scale Length||107 mm|
|Battery Life||Approx. 10 hours when continuously operated on manganese - oxide batteries with the pointer pointing to the central scale value.|
|Batteries||Four AA (R6P) batteries|
|Approx. Width||125 mm|
|Approx. Height||103 mm|
|Approx. Depth||53 mm|
|Approx. Weight||500 g|
|Compliance||EN61010-1:1993; EN61010-2-31:1995 (Overvoltage Category III, Pollution Degree 2 installations for indoor use)|
Energy Meter Tester (3.1 KM) is meant for adjustment or accuracy tests of reference-class or service-class instruments. It is available in accuracy class of 0.02, 0.05, and 0.1. Energy Meter Tester is a multifunctional reference standard designed for testing or adjustment of most precise reference or working standards and measuring instruments (electrical values and power quality parameters). The quality parameters of Energy Meter Tester is according to IEC 61000-4-30 including harmonic (up to 50th) and inter-harmonic measurements. We provide Energy Meter Tester in two design options that are portable and desktop. It can be used independently or with a PC, that provides extended functionality. It is intended for use in national centers of standardization, metrology and certification, industrial metrological labs, etc.
Suitable For Testing Of :
Portable Design (fitted into IP51 dust-tight enclosure) :
Portable Energomonitor 3.1KM complete with three-phase Phantom Power Source Energoforma 3.3 can be applied for testing of active, reactive single- and three-phase power and energy meters, voltage transformers, current transformers power quality analyzers, electric energy meters etc.
Desktop Design :
Energomonitor 3.1K-05 Provides :
Transformer Insulation Resistance Tester that we offer has an absorption ratio (IR 60 Sec/ IR 15 sec) and polarization index (IR 600 sec/ IR 60 sec), which are calculated and saved automatically. Transformer Insulation Resistance Tester features digital alphanumeric Display and its resistance range is up to 100 G. it operates on different test voltages such as 500V, 1000V, 2500V, 5000V, 10000V. It is suitable for testing generators, HV motors, power capacitors, transformers, cables, and lightening arresters. It is also ideal for site test in EHV substation. Its short circuit current is greater than 5 m A and offers automatic discharge after the test is over. Transformer Insulation Resistance Tester has internal rechargeable battery and charger for heavy duty operations.
The company is a prominent Exporter and Supplier of the Flexible AC DC Leakage Current Testers, with the range including Flexible AC DC Leakage Current Tester (FCM-100) and Flexible AC DC Leakage Current Tester (RLM-1). The Flexible AC DC Leakage Current Testers are the world’s first flexible DC current tester, with a measuring range is AC/DC 0.001A 2500A (FCM 100) and AC 3000mA/30A/300A/3000A (RLM-1). The RLM 1 signal output is Dc m V and the inside diameter of the Flexible AC DC Leakage Current Tester is φ200mm.
|Description||True RMS ACA, DCA, ACV, DCV|
|Method of detection||True RMS|
|Display||LCD (Digital display: 3999 counts)|
|DC Current Range||400/2000A|
|DC Current Resolution||0.1A|
|Response Time||Approx. 1 second (on DC current/voltage range) Approx. 2 seconds (AC current/voltage range, resistance range)|
|Operating temperature and humidity||0 - 40°C, 85% RH or less (no condensation)|
|Influence of external magnetic field||4A or less at 400 A/m|
|Influence of conductor position||±(1.5% rdg + 3 dgt) or less|
|Safety Standard||Conforms EN61010-1, EN61010-2-031, EN61010-2-032|
|Circuit voltage||1000 Vrms or less|
|Withstanding voltage||5.55 kV AC for one minute|
|Power Supply||6F22 (006P) 9V x 1 6LR61 x 1|
|Battery Life||Approx. 15 hours (continuous)|
|Consumed current||Approx. 15 mA|
|Sleep Function||Automatically powered down in about 10 minutes after the last switch operation|
|Diameter of measurable conductor||55 mm at maximum|
|Dimensions||Approx. 105 (W) x 250 (H) x 49 (D) mm|
|Weight||Approx. 540 g|
|Accessories||Batteries, carrying case (93034) Output plug (98012) Test Lead (98011) User's manual (IM CL250)|
|Peak Hold||On current / Voltage range|
Energy Meter Tester (3.3 T1-C) is a portable reference standard, power quality analyzer, data logger, comparator and oscillograph. Energy Meter Tester is available with different types of accessories such as clamps switch module, scanning heads, current transformer calibration switch, training program, etc. Our Energy Meter Tester is used for various applications and appreciated for providing precise results.
Energy Meter Tester (3.3-100) is a three-phase waveform generator (current/voltage source). It is used for generating three or single-phase system of current/voltage signals according to a user-specified signal model. Energy Meter Tester is used for testing of instruments that measure RMS of currents and voltages within commercial frequency range. Energy Meter Tester is widely used as part of mobile test laboratories, test systems in conjunction with reference measurement instruments including Energomonitor 3.3 T1-C and Energomonitor 3.1 KM. It can be used either as an independent device or as part of mobile test laboratories.
Sphere of applications :
The M700 AC/DC Clamp Milli-Ammeter (CE) or Precise AC DC Leakage Current Tester is accurate and sleek with a rugged and reliable design. The Precise AC DC Leakage Current Tester is capable of measuring 4-20 mA in control circuit and there are different internal opening diameters of the clamps. From small current leakage to high load currents, the Precise AC DC Leakage Current Tester can measure all currents in µA or ma while testing protection relays. The application area of the Precise AC DC Leakage Current Tester is automobile electronics and they can check earth leakage currents and small third harmonic leakage current from lightening arresters as well. There are special models for AC leakage clamps and AC/DC leakage clamps, and the Precise AC DC Leakage Current Tester can also be availed for clamps with multi meter functions, leakage current check and load current check in high voltage cables.
|Diameter of measurable conductor||6mm diameter max.|
|DC Current||Range and resolution [Measuring range]||Measuring accuracy (*1)|
|20.00 mA [0.00 to±21.49mA] 100.0 mA [±21.0 to ±126.0mA]||±(0.2%rdg+5dgt) (*2) ±(1.0%rdg+5dgt)|
|DC Voltage OUTPUT||20.00 mA [0.0 to±214.9mV] 100.0 mA [±210 to±1260mV]||(DCA Accuracy)+(±0.5mV) (DCA Accuracy)+(±3mV)|
|Display||4-digit LCD Numeric display|
|Response time||Approx. 1.5 seconds (2.5 seconds when across the range)|
|Range switching||Auto range|
|Operating temperature and humidity||-10oC to +50oC 80% RH or less (no condensation)|
|Safety Standards||EN61010-1, EN61010-2-030, EN61010-2-032|
|Withstanding voltage||2.21kV AC for 5 seconds (between the core and the case)|
|Power supply||Four AA-size alkaline batteries (1.5V LR6)|
|Battery life||Approx. 60hrs (continuous) backlight off and LED light off|
|Other functions||Data hold, Zero adjust function, Auto power off, LED Torch light, Back light display, Illuminant panel|
|External dimensions and weight||61 (W) x 111 (H) x 40 (D) mm Approx. 290g (including batteries)|
|Standard accessories||User’s Manual, Batteries, Soft case (93045)|
(*1) At 23oC ±5oC, 45% to 75%RH
Measurement accuracy: ±(% of reading + digits)
Terms of accuracy : Open and close the clamp sensor after power on and perform zero adjustment.
(*2) The 20mA range accuracy assurance is the average of 5 times measuring.
We are the trusted Exporter & Supplier of Water Insulation Resistance Tester. It is widely accredited for its precise construction and accuracy in results. We have associations with reliable vendors and our team of quality inspectors stringently checks each and every piece of Water Insulation Resistance Tester before procurement. In addition, we make available our Water Insulation Resistance Tester at the most competitive rates.