Mcon Wall Putty

Listing ID #1077894

Our company is a renowned Manufacturer, Supplier and Exporter of Mcon Wall Putty from Maharashtra. The Mcon Wall Putty we make available is white cement based and water resistant. Our Mcon Wall Putty is especially used to seal the pinholes and the blow holes getting exposed on concrete/plastered surfaces. It can be applied even on internal and external surfaces. The Wall Putty offered by us is known for its increased adhesion strength.
Shelf Life & Storage : MCON WALLPUTTY will have a shelf life of 12 months in unopened containers when kept in dry conditions at a temperature between 5ºC to 45ºC. Storage at higher temperature or high humidity may reduce shelf life.
Health & Safety : MCON WALLPUTTY is alkaline in nature. Avoid inhalation of dust and contact with skin and eyes. If contact with skin occurs rinse with plenty of water and seek medical advice.
Specification : MCON WALLPUTTY is a white cement based, water resistant requiring precise quantity of water for substrates and is an inert filler material available in 20 kg plastic lined sacks
Mcon Wallputty :
White Cement Based Wall Putty

• Synthetically bound ready to use compound for inert filler material
• Only precise quantity of water to be added
• Ensures use on all common types of building interiors
• Excellent adhesion
• Excellent thixotropicness
• Due to good bonding property it is more durable.
• Excellent whiteness, so gives good exposure.
• Excellent finishing and easy to apply
• Completely applied putty will not allow water penetration.
• Provides smooth, silky and featheredged finish to substrate to facilitate better texture of paint
• Application of MCON WALLPUTTY with workmanship makes exterior and interior look aesthetic
• No curing is required.
• Prevents growth of algae and fungi on walls
• It is in dry powder form and does not produce any kind of filth smell at the time of application.

Uses :
Mcon Wall Putty is suitable for :

• Use on both precast and concrete structures like sand cement plaster, level brick work and block work, exposed concrete.
• Plywood
• AC sheets
• Gypsum boards
• Can also be applied for redecoration on firm, old painted areas.

Application :

• Surface Preparation : Make sure that the surface is absolutely clean, dry and free from dust, grease and foreign materials. There should be a time gap of at least 10 days before MCON WALL PUTTY application is done on newly plastered surfaces. Ensure that the surface is fairly even. If concrete surfaces are to be painted, it shall be washed with a water jet at 3000 psi and all loose concrete should be getting removed and all pin holes and blow holes should get opened.
• Application : MCON WALL PUTTY is a ready to use material. Take 2.5 to 3 parts of powder to 1 part of water by volume and mix it thoroughly for 10-15 mins. Apply the prepared material with putty knife from bottom to top by ensuring complete filling of holes with putty material and featheredged finish. The coating should be about 1mm thick. Second coat of MCON WALL PUTTY depends up on the exposed surface after first coat (generally both coat do not exceed 2mm) and leave the surface to dry overnight. The drying time of each coat should be 3 hours, but will vary from surface to surface.(depending upon
• atmospheric conditions) Finishing  : Make sure that the material has fully covered the substrate and dried. If putty applied surface is rough, surface should be made smooth by rubbing suitable emery paper on it. Ensure that the paper is fine and does not cause scratches on the MCON WALL PUTTY coating area. The MCON WALL PUTTY area is now ready for painting.
• Painting : The smooth surface finished with MCON WALL PUTTY does not require any putty or primer before paint application. Just apply any paint as per the manufacturer's standard specification. Intact painting can commence within a few hours of MCON WALL PUTTY.

Packing & Coverage

• Packing : MCON WALL PUTTY is available in 5kg.and 20 kg. plastic lined sacks.
• Coverage : MCONWALL PUTTY has a coverage of 2.5 to 3m² per kg when applied at a thickness of 1mm.

Mcon Wallputty
White Cement Based Wall Putty TM

• AN  ISO 9001 - 2008 (QMS) CERTIFIED CO
• AN  ISO 14001 - 2004 (EMS) CERTIFIED CO
• AN  ISO 18001 - 2007 (OHSAS) CERTIFIED CO