Gurugram, Haryana, India
GST : 06AFNPS7627F1Z1
Verified
Add Review
Our Products
Lightweight Uncooled Binocular Recorder: SATIR UTR50/75 is a lightweight, user-friendly binoculars that has been specifically designed for observation and recording purposes.
SATIR thermal cameras has been used in a wide range of applications and it is because of this we believe we are leading the way in thermal imaging.
Features
Vehicle Thermal Imager: SATIR NV618W (La Moon) allows users to see a wide angle of the road which is not possible with normal headlights. The high resolution image allows users to have a clear view of the road layout and hazards that approach the vehicle while driving.
SATIR have been manufacturing high quality infrared thermal cameras for over 20 years and our aim is to have a thermal camera that will meet your thermal imaging needs and requirements.
Features
The LCI™ is intended for energised cable identification on secondary and primary circuits. It features a dual frequency technique that eliminates false identifications. The LCI™ is designed to be easy to use, safe for the user and cost-effective.
Features
Portable earthing equipment are safety equipment designed for discharging & grounding of dead equipment. the system is designed for high fault levels so that even if during shut downs, when technicians are on the job, by mistake if the supply is switched on, the portable earthing equipment saves human life as well as equipment under maintenance. special line end & earth end clamps along with operating socket and earthing lead are used. the line end clamps, earth end clamps & operating sockets are made of very special aluminum alloys which can withstand high short circuit currents.
Using portable earthing equipment, clamps are applied from remote just by turning the insulated operating pole and the operator never comes in contact with any conductor, so it is highly safe system. using the common operating pole clamps are applied on each phase one by one.
For dimensions of insulated rods please refer specifications of insulated sticks at the beginning of electrical safety
equipment section.
Accessories
Special grounding cables available in following types
Remotely detect partial discharge activity inside any energised cabinet using ndb Technologies PD Annunciator™ system. Probes are installed on the unit under test and will give instant status thus preventing long term damage to your switchgear equipment. Its unique design allows simultaneous TEV and Acoustic detection for optimized results. The flexible sensor's unique design allows for combined directional airborne acoustic and TEV detection.
Features
These are used for the retrieval of victims of electric shock, safeguarding the life of the rescuer. Required in all live line areas as part of Health & Safety risk assessment. Available for 11kv, 33kv and 66kv systems in lengths oftm, 1.25m, 1.6m and 2.0m The Rescue Sticks conforms to 100kv/feet dielectric strength Provided with 400mm dia rescue hook, anti slip grip and safety stopper.
Dual Field Automotive Night Vision Camera: The NV618S has been designed to work in both daylight and night time environment due to the improved low light and thermal camera technology. It has primarily been designed for the automotive market but has other application in the security and military markets. The NV618S is a safety device as it has built-in analytics to alert the driver on ongoing obstructions and pedestrians, the alerts are either visual or audible depending on the user configuration and can work in most weather conditions such as poor light , fog etc. The NV618S can be easily mounted onto the vehicle and with its robust casing it can withstand harsh environments.
Features
Portable Thermal Tablet:The PK-80 integrates tablet and thermal camera technologies, which makes the device a multifunctional, multi-application device. The PK-80 can access the internet via a Wi-Fi connection or a tablet network. Users can share thermal information with other people anytime, anywhere. It is easy to use and has been designed with the user in mind. If your company has their own App it can also be added to the PK-80.
Sphere Gaps are absolute standards for measurement & calibration purposes of high voltage equipment Sphere Gaps from 20mm to 1500 mm are available. The Sphere Gaps are provided with automated controls with digital display.
Non linear carbon discharge resistor type discharge rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. the earthing lead is made up of special highly flexible braided copper cable with transparent sheath. copper hook of 4” dia of ½” thick copper rod & earth end clamp of special alloy are provided.
For dimensions of insulated rods please refer specifications of insulated sticks in the beginning of electrical safety.
Features
When discharging inductive apparatus (transformers, reactors etc.) controlled discharging must be used. we provide non linear carbon discharge resistor for this purpose which prevents the lightning impulses appearing across the equipment being discharged. while discharging inductive loads the emf induced across the object is directly proportional to rate of change of flux i.e.
Since l (inductance) is usually large and the discharging takes place in microseconds, a huge impulse voltage resembling a 1.2/50 μsec pulse appears across the object (a typical waveform is shown in fig), thus subjecting the equipment under discharging to a lightning impulse voltage.
To overcome this non linear carbon discharge resistor is employed. the reverse temperature coefficient of carbon facilitates controlled discharging. as the current flows through the carbon resistance, this increases the temperature and by virtue of reverse temperature coefficient, the resistance falls. therefore as the current is flowing, voltage is reducing and since resistance is also reducing acontrolled discharging takes place.
The do fuse operating rods has and innovative design for fitting, removing & changing drop out fuses. the do fuse. operating rods has a spring loaded fuse jaw which accepts the do fuses easily and ensures that it does not fall while fitting or removing. the entire operation is carried out from ground level comfortably.
This method saves considerable amount of time and effort for fuse replacement and provides extremely safe procedure as compared to the conventional procedures.
The PDS allows online partial discharge detection on underground cable accessories and equipment for security maintenance purposes.
Features
The ADD™ allows online partial discharge detection on medium voltage accessories such as: Arresters, dry type transformers , bushings, insulators, etc. The partial discharge level is displayed by visual and audible indicators. The remote display module also allows to read the levels from a great distance for maximal safety.
Features
The AE-150™ is designed to detect and localize Partial Discharge activity by correlating acoustic and electric sensors' data. The AE-150™ has many acquisition modes, each used for detecting and locating Partial Discharge activity in a transformer. The AE-150™ unit is mounted on the transformer tank using its powerful magnets that also hold four acoustic sensors. Acquired data is sent to Mirador-Tx software where all advanced positioning functions are implemented. This cutting edge software allows easy data interpretation, reporting and monitoring.
Features
