Other Products / Services #1557300

Cecon Room Air Sterilizer with its exclusive three stage Air Purification and delivery control module is not only designed to produce high efficiency performance particulate and Odors removal but also increase air charges which are essential for clean & healthy environment required in these areas. Besides this various indoor air pollutants released from furniture, upholstery, drapery and carpet fabrics can produce irritating and health threatening allergens. Dust, pollen, smoke and odors are mong the common contaminants that need to be removed from the air we breathe and this compact high efficiency air cleaning system is designed to do that.

Content will come here.Content will come here.Content will come here.Content will come here.Content will come here.Content will come here.Content will come here.Content will come here.Content will come here.Content will come here.Content will come here.Content will come here.

Tube Sealer

Special featurers

• An ideal compact & light weight device for bench top use.

• Same hand held sealing unit.

• To seal the tube of blood bag containing blood without causing.

• Oscillition Frequency :- 40.68 Mhz.

• Power Supply : - Operatng voltage required is single phase 220-230 VAC 50 Hz.

• Maximum Sealing Time : 1.5 Sec.

• Power Consumption : 100 VA.

• Caps provided in front of electrodes are removable, so it is easy to clean.

• Electrodes are made from high grade metal for perfect sealing.

• Provision of canvas carrying bag.

Electrolyte & Blood gas analyser

BG 2100 is an innovative ISE Electrolyte and blood gas analyser complementing our existing ISE NG. The analyzer measures K+, Na+, Cl, Ca++, pH, PCO2 and PO2 in whole blood, serum and plasma. The analyzer has a compact design, is easy to operate, economical and is virtually maintenanace free. The aspirate probe has a self-cleasing mechanism affording enhanced operator safety, low carry-over and cross - contamination.

Technical Specifications

> Equipment interface : 240 X 128 dots LCD display with soft key pad> Analysis principle : Direct "Flow Thru" electrodes> Sample volume : 200> Sample type : Whole blood, serum, plasma.> Sample application : Sample cup, capillary or collection tube.> Throughput : 65 samples / hour> Calibration : Automatic two-point calibration with additional option for carrying out one-points and two-point calibration manually.> Pre adjusted standby mode with automatic calibration steps.> Quality control : 2 different levels of quality controla.> Printer : Built in stationary head graphical thermal printer.> Storage Capacity : 1000 samples.> Interface port : RS 232> Power : 110 230V AC, 50/60 Hz> Dimensions : 452(H) X 452 (W) X 500(D) mm appox.> Equipment weight : 15 kg appox> Operating environment : 15 to 30 C , 20% 80% RH, 86 106kPa

To increase patients reliablity by providing objective materials.
To satisfy patients needs with easily understandable results.
To differentiate your hospital service with high technoloty.

The TOC instrument uses the classical flow through concept for TOC online control. The efficient UV oxidation of organic compounds by "direct surface principle" in combination with conductivity detection guarantees the high precision of the measured values.
The automized functions of qualification allow a high standard of safety and minimized operation costs in controlling pharmaceutical water.
Operation control is achieved on the basis of windows XP embedded software.
It is an eays to use system which brings quality control at an affordable level to your lab. The TOC is a valuable accessory for all EDI and ultra pure water systems.

Calibration

Calibration can be done by the user himself. For calibration of the TOC instrument the online control mode has to be stopped and the calibration is performed.The operator has to connect the two intels with the calibration standard solution and diluting water sample. The programmable procedure of the calibration steps will be performed automatically.The statistical evaluation of the measurements and the corresponding calibration parameters will be shown on th escreen (plausibility test)

URINOVA UA-2800 Automatic urine analyzer is the upgrading analyzer for semi-automatic type. AU 2800 represents the highest technology of urinalysis field which contains the new computer technology, together with our 15 year's professional research experience for urinalysis, this analyzer is suitable for laboratories which typically have more than 100 urine samples per day.
URINOVA UA-2800 automatic urine analyzer is a fully automatic, bench top instrument. This instrument contains automatic sample continous loading, accurate quantitative sample dripping and precise controlled reagent reacting time. Such design enhances the test accuracy and repeatability.
With fully automation system, it help laboratories reducing time consumption and cost saving. Large LCD touch-screen and user friendly operation interface ensure the system's "easy to use" for daily routine tasks.

Benifits Of Urinova UA - 2800

Continuous fully automatic analsis Truly walk away automatic technology support 110 samples continuously being tested at one time. Sample auotmatic loading, dripping and controlled reagent reacting time. Reagent strip automatic loading. Automatic rectifying the test result influenced by ambient temperature, non specificity of the strip, pH, specifid gravity and color. Automatic collecting of waste strip and liquids. Self automatic calibration. Flexible software and user friendly system operation. Large LCD touch sreen, convenient for human instrument dialogue. Easy user operation interface . Large storage up to 10, 000 testing results. Self calibration is accomplished with our calibration strip which enables accurate result. Built in refractometer, Turbiddimeter and Reflective color sensor enchanced reliability.

Product Characteristics

> Adopting the advanced high luminosity cold light source with 4 wavelenght, which improves the sensivity, accuracy, specificity, and reduces the interference from ambient light.> Adopting automatic waste handling eqipment, which avoids cross contamination between samples.> Automatically rectify the test results influenced by ambient temperature, non specicity, pH, specific gravity, and color.> Built in thermal printer with high speed and low noise, external dot matrix printer> Connectable with external barcode reader> Connectable with urine sediment analyser> User can set an abnormal valve flag by themselves> With Chinese and English options> International, Regular and symbol system units available for option

designed for homogenization, emulsification and dispersion and mixing of fluids at high speed. The user has a choice of selecting from ac drive or ac/ dc drive with stepless speed regulationsfor continuous variation of speed as per requirements

ro-127a/d suitable for homogenizing of tissues at high speed available, chunck to hold shaft upto 10mm dia. Fitted with teflon grinding pestle. 50 ml. Glass homogenising cup with rod supplied as standard, optional available 5 ml, 15 ml, 25 ml. & 100 ml.

rq-127/d, rq-130/d, rq-130b/d are with ac/dc mtors, these unots are 3 bladed impeller (optional saw cutter) housed in flange type cage. Optional digital speed indicator for precise setting of speed.

rq-140/de specially designed brushless ac variable speed emulsifier driven by frequency inverter to ensure reproducible speed with any load. Steady & constant speed ideal for solution that change viscosity during mixing. Emulsifier has built in digital rpm indicator for process validation and reproducibility.

UV is effectively utilised in these cabinets, powerful UV tube lights are combined with carefully located optical reflectors to ensure uniform intensity distribution of the UV radiation throughout the cabinet. Acrylic windows offer exceptionally clear all round vision and do not allow transmission of UV.
Cabinet has flap front access as standard for easy access to the interior of the cabinet. Two service ports with covers are supplied in the side panels. Cabinet is supplied with handy corner shelves. 15W white lights, operated from an external switch, illuminate cabinet interior.
Control system allows the choice of the timed UV exposure from 5 to 30 minutes.

PCRUK Workstation additionally protects against contamination by bathing the PCR apparatus in sterile air and limiting risk of contamination from the operators arms or from any equipment bought into the otherwise sterile environment.

Range includes

BC UV Sterilisation cabinet

Features:

• Doors sensors switch off UV lamps if door flap is opened, ensuring operator safety
• Acrylic protects the operator from beta emissions from commonly used 32P labeled compounds.

Optional StandMild steel box section, finished in chemical resistant epoxy coating.

Cabinets Size & Part Number

Part number	External mm	Internal mm
BC UV SC	802 x 549 x 863	730 x 489 x 699

Construction and Materials:

>The housing is epoxy coated.> Transparent panels are manufactured from 8mm clear acrylic which is non-flammable, resistant to corrosion and easy to clean.> Aluminum uprights are anodised.> The base tray is manufactured from PVC colour black.

BW UV PCR Workstation

Bigneat feature:

• Auto speed increase on door opening maintains are velocity speed to 0.45m/s at the workstation front

Also:

• Doors sensors switch off UV lamps if door flap is opened, ensuring operator safety
• Acrylic protects the operator from beta emissions from commonly used 32P labeled compounds
• HEPA filtration system that delivers air to Class 100 quality
• Electronic low-flow alarm
• Quiet when operating - >50 d(B)a.

Cabinet Size & Part Number

Part number	External mm	Internal mm
BW UV PCR	802 x 549 x 998	730 x 489 x 699

Construction and Materials:The housing is epoxy coated.Transparent panels are manufactured from 8mm clear acrylic which is non-flammable, resistant to corrosion and easy to clean.Aluminum uprights are anodised.The base tray is manufactured from PVC color black.

Features

> Ideal for checking sealing integrity of blister, strip and pouch packs capped bottles etc.> Extremely compact construction> Very low noise level> Polycarbonate vacuum desiccators sustain vacuum for long time> Stainless steel (GMP) construction> Built in vacuum gauge and isolation valve> 0-5 minutes timer for auto-stop> Vacuum level up to 550 mm of hog

Specifications

This unit has double walled insulated PUF modular panels, which can easily be assembled at site without any major hassles. Interior is made of Stainless Steel and Exterior is either made of Mild Steel finished with powder coating or Stainless Steel. The unit is provided with perforated Stainless Steel trays. The unit has double walled leak proof metal door with lock, with a provision of opening door from inside. Forced air circulation for uniform temperature.

Exterior made of Mild Steel and Interior made of Stainless Steel. Exterior and Interior made of Stainless Steel(S). Intelligent Control System : The controlling system having is PLC Base and PC communication onEthernet Sensor : Temperature sensor PT-100 used for measurement. Temp. in degree Celsius with 0.1C. Cooling System : Consist of hermitically sealed compressor coupled with evaporation coil and condenser, safe guarded by time delay circuit. CFC free refrigerant. The cooling system is made up of split type so as one can place the compressor coupled with condenser coil (Condenser unit) in well-ventilated area and avoid hot air throw in the stability room. Alarms : Audio and visual alarms are generated for temperature variation. Safety : The unit is provided with safety devices for temperature under shoot in case of malfunction. The unit works on 230 Volts AC and 50Hz mains supply.

This unit is double walled chamber. Interior made of stainless steel and Exterior is either mild Steel finished with powder coating or stainless steel. Glass wool/PUF insulation between both the wall is provided. Full-length inner glass door and outside metal door with magnetic gasket & lock. Forced air circulation for uniform temperature. One Stainless Steel perforated tray is provided. The tray can be placed at various heights to accommodate the change in sample height. The purpose of doing so is to vary the exposure intensity to reduce the test duration. PU wheels for easy move ability.

IlluminationChamber is illuminated using 4nos of flourescent tube light to produce visible light (measure in lux). A one no. Near UV light of wavelength 365nm (measured in watt/sq. Meter) are fitted on topside of the chamber. Intelligent control systemTemperature Controller with Ethernet Communication Cooling system Hermitically sealed compressor coupled with evaporation coil and condenser, safe guarded by time delay circuit. CFC free refrigerant. SafetyA Safety thermostat to switch off the tube lights if temperature overshoots. Door switch to switch off the UV light when door is opened. The unit works on 230 Volts AC and 50Hz mains supply.Selection guide for photostability chamber Eqp- Equipment Shp- Shipping Election guide for photostability chamber with humidity Optionals A Calibrated Lux-Meter & UV Meter Common Software:Centralized work station for viewing, trending performance of equipment. Software complies to US FDA 21 CFR Part 11.

Construction :

The unit is a double walled chamber, with glass wool / PUF insulation. Interior is made of Stainless Steeland Exterior is either made of Mild Steel finished in powder coating paint (powder coating on both sides of the mild steel) or Stainless Steel. The unit has full-length inner glass door and outside metal door with magnetic gasket and lock. The unit is provided with perforated Stainless Steel trays. Forcedair circulation for uniform temperature. PU wheels for easy move ability.

• Temperature & Humidity Suitable for 25 C& 60% RH, 40 C & 75% RH, 30 C & 65% RH
• Specially designed chambers to carry out stability studies at low humidity conditions such as 25C & 40% RH, 40C & 25% RH NMT, 30C & 35% RH

Intelligent Control System :

The controlling system having is PLC Base and PC communication on Ethernet

Heating System :

Long lasting stainless steel tubular heaters with s.s. fins.

Humidity System :

Humidity is by steam injection. A humidifier tank is fitted with two nos of heaters. One heater works as a stand by in case the regular heater fails. A water reservoir tank is connected to the boiler tank. Two boiler tanks are fitted with magnetic float switch and float valve. Magnetic float switch is provided for the safety of boiler as it facilitates in cutting off the heater supply in case of low level of water.

Sensor :

Rotronic make temperature and humidity transmitter 4-20mA used for measurement. Temperature in degree Celsius and Humidity in %RH with 0.1C and 0.1%RH resolution.

Cooling System :

Hermitically sealed compressor coupled with evaporation coil and condenser, safe guarded by time delay circuit. CFC free refrigerant.

Alarms :

Audio and visual alarms are generated for temperature / humidity variation.

Safety :

This unit is provided with safety devices for temperature and humidity over shoot in case of malfunction.

The unit works on 230 Volts AC and 50Hz mains supply.

Air conditioning does not mean dust free atmosphere when you plan to protect your costly installations and equipments from airborne dust particles of sub-micron size. As you are aware that air-conditioning filters can stop dust particles upto 20/30 microns only (1 micron = 1000th of mm), it becomes extremely difficult to create and maintain dust free atmosphere merely by window type Air-conditioner or centrally air conditioning system. Cecon Air Cleaners are the only perfect solution to improve the air quality in any specific area for maintaining dust free atmosphere without making any change in your existing infrastructure. These COMPACT ELECTRONIC AIR CLEANERS are easy to install and are highly useful in places like Computer centres, Process Control rooms, Electronic Industries, Telephone Exchange, Research laboratories, Operation Theatres and many other places requiring clean and dust free atmosphere > Compact> Portable> Strong Laminated Body> Zero-Maintenance> Low Power Consumption Application > Computer room> Operation theatre> Cement industry> Steel plant> Control room> Tissue-culture lab> Thermal power station> Electronic industry> Pharmaceutical industry> Instrumentation / R & D laboratories> Defence production establishment

Cecon Air Curtains are scientifically designed air barrier to meet the present day concept of energy conservation. It maintains cool and clean inside atmosphere by isolating outer hot and dusty air in restaurants, computer room, production hall, O.T. room etc. while allowing free movement of man & material. Simple in operation with electronically controlled low power consumption, Cecon Air Curtains are installed on the outer or inner side of door opening leading to clean or air conditioned room, while in operation, it creates a powerful invisible barrier of air across the entrance, thereby isolating the outer and inner atmosphere to prevent the entry of outside hot air, humidity, insects, foul smell, fumes, smokes etc., even while your door is wide open. Cecon Air Curtains are very effective in controlling air-conditioning cost even while there is free movement of men and material.

Main Features

> Light weight metallic body> Electrically balanced centrifugal forward curve impellers for vertical drift> Especially designed motors to balance air load and RPM> Noise level less than 65db> Continuous rating for non-stop operation> Easy installation> Maintenance free> Mounting available for wood panel, aluminium panel, wall, ceiling and recess mounting> Rust free enamel spray coating in contrast colours to suit any decors> Available in different sizes and velocities

Application

> Electronic Industry> Pharmaceutical Industry> Thermal Power Plant> Food processing unit> Soft-drink manufacturing plant> Air-Conditioned Restaurant and hotel> R & D Centres> Hospital & Nursing Homes> Control Rooms> Electronic Exchange

Cecon Room Air Purifier cum Ionizer with its exclusive three stage Air Purification and delivery control module is not only designed to produce high efficiency performance particulate and Odors removal but also increase air charges which are essential for clean & healthy environment required in these areas. Besides this various indoor air pollutants released from furniture, upholstery, drapery and carpet fabrics can produce irritating and health threatening allergens. Dust, pollen, smoke and odors are mong the common contaminants that need to be removed from the air we breathe and this compact high efficiency air cleaning system is designed to do that.

Main Features

> Compact light weight body made with ABS. Plastic & maintenance free> Centrifugal blower on double ball bearing ensures noise free operation with low power consumption of 130 Watts only> Oscillating louvers for uniform distribution of cool, clean and ionized air> Unique self cleaning filter belt> High power air ionizer for air purification> Washable pre-filter with optional choice of activated charcoal filter> Caster wheel for easy mobility

Cecon Room Air Sterilizer with its exclusive three stage Air Purification and delivery control module is not only designed to produce high efficiency performance particulate and Odors removal but also increase air charges which are essential for clean & healthy environment required in these areas. Besides this various indoor air pollutants released from furniture, upholstery, drapery and carpet fabrics can produce irritating and health threatening allergens. Dust, pollen, smoke and odors are mong the common contaminants that need to be removed from the air we breathe and this compact high efficiency air cleaning system is designed to do that. Main Features > Compact light weight body made with ABS. Plastic & maintenance free> Centrifugal blower on double ball bearing ensures noise free operation with low power consumption of 130 Watts only> Oscillating louvers for uniform distribution of cool, clean and ionized air> Unique self cleaning filter belt> High power air ionizer for air purification> Washable pre-filter with optional choice of activated charcoal filter> Caster wheel for easy mobility Application > Operation Theatre> Clinical & Research Laboratories> Infant Recovery Area> Intensive Care Unit (I.C.U.)> Burn and Infections Disease Patients Ward> Tissue Culture Room> Labour Room>T.B./Asthmatic and General Patient Ward> Veterinary Hospital

The incineration process can be understood through a triangular puzzle. This triangle is an isosceles triangle with two equal and one unequal side. The three sides represent the 3Ts of incineration i.e. Time, Temperature and Turbulence. If one side is decreased then there has to be compensatory increase in the other two. A perfect balance between all three has to be maintained for successful incineration. AndBLACKHOLEincinerators have achieved this perfect balance -

1100C (Tp) + 2Sec (Tr) + Tb =BLACKHOLE

BLACKHOLE Incinerators

BLACKHOLEincinerators are twin chamber, fixed hearth, pyrolytic and controlled air incinerators available up to a capacity of 500 kgs/hr for solid and 1000 kgs/hr liquid wastes. For lesser amount of waste we also supply packaged incinerators with the capacity of up to 50 kgs/hr. Incinerators with capacity of more than 50kgs/hr are supplied in SKD conditions and are later assembled on site.

Optional Accessories Offered

Automatic solid waste feeding and ash removal systems.Liquid waste feeding systems for automatic feeding of liquids.Continuous emission monitoring and recording systems.Heat recovery systems.

Salient Features

Conforms to national & international pollution norms - CPCB, USEPA & EU.Suitable for a wide range of wastes.Auxiliary fuel option of oil or gas.CE certified burners sourced from Europe.Fully automatic, safe and easy to use.PLC based control panel.Castable and joint less refractory ensures longer life and durability.Packaged range of incinerators are shop assembled, Plug n Play type, ready for instant use, require minimum site work and space for installation.Equipped with ample number of safety interlocks.The controlling system is foolproof and cannot be tampered with thus ensuring that none of the safety interlocks and operating procedures are bypassed.The motors in the system are operated by VFDs which not only prolong their life but also reduce the energy consumption.

The biggest problem faced by all of us today is pollution caused by unsafe disposal of toxic & hazardous material. Since the materials like empty glucose bottles, hoses syringes, gloves etc when burnt, emit gases. Such materials have to be disposed off properly by alternate safe methods, which when thrown are collected and resold in a new packaging, giving the impression of a fresh one and results in the spread of deadly diseases amongst us. Cecon Shredder is designed to avoid such infections and make the environment pollution free.

The shredder shreds all kinds of waste like syringes, needles, glucose bottles, pet bottles of mineral water, plastic lumps, pellets, wood paper, cardboard etc.

Specification

Cecon Shredder consists of a shredding chamber which contains two counter rotating shafts fixed with circular blades with predetermined thickness, which may have one or more hooks depending on the material to be shredded. The material is fed through a hopper placed above the shredding chamber. The blades take material towards the center of the shredding chamber and as the material passes through the blades, it is shredded and falls in the container kept underneath the shredder.
Cecon Shredders are also provided with the system which stops the machine automatically in case of overloading and reverses the shaft's roational direction to free the blades from the material before automatically resuming its original "forward" running operation.

Features

> Solid body structure and casing> Low noise level> Heavy duty gear> Maintenance gear> Unit is protected against overloads and equipped with fuses> Auto reverse features with PLC control (optional)> Pneumatic feed control (optional)> Low budget machine

Application

> Finishing & Producing Industry> Hospitals / Nursing homes> Bio Medical Waste> Laboratories> Catering Industry> Supermarkets> Municipal Authorities> Pharmaceutical Industry> Plastic Industry> Card Board Industry

Sailent Features(Cecon High Pressure Autoclave) Latest engineering techniques, designs, validation for the system to meet all norms of cGMP. Cecon double walled sterilizer, the inner S.S. 304/316 chamber and outer carbon steel or S.S. 304 jacket. The function of jacket is to improve the temperature uniformity inside the chamber and reinforce the chamber from outside.The doors are provided with diaphragm clutch locking system which operates on chamber pressure and also with additional safety features which prevent:a. Simultaneously opening of both doorsb. Opening of doors when process is onSpecially designed and door shaped gaskets for better door sealingResin bonded glass wool for better temperature uniformity and for reducing heat losses Outer cover is of S.S.304The sterilizer will be supplied with S.S. Loading carriage with shelves and a S.S. Tubular trolley.

Customized Designs are also available

Application

> Sterilizers are suitable for solutions in glass containers like ampules, vials & bottles empty glass wares, utensils, instruments etc.> Drying of vessels, machine parts, change parts, rubber bungs etc.> Porous material like laboratories dresses, gloves, masks etc.> Bulk power sterilization

Controls

Cecon sterilizers have specially designed control system for process automation. The sterilizer will be provided with all mounting and fittings such as pressure gauge, compound gauge, dial thermometer, steam trap, steam inlets & outlets, safety valves. We also provide micro-based controlled processors i.e. Programmable Logical Control.

Salient Features(Cecon Vertical Autoclave)

> The chamber is usually made of S.S. 304/316 and outer carbon steel or S.S. 304 jacket. The function of jacket is to improve the temperature uniformity inside the chambers and reinforce the chamber from outside> The doors are provided with locking system for safety features which prevent opening of doors when process is on> Specially designed and door shaped gaskets for better door sealing

Application

Cecon Vertical Autoclave offers the customers maximum reliability in view of conducting small batches or operations for sterilizing like:> Solutions in glass container e.g. Ampules, Vials, Glass Bottle etc.> Empty glass utensils, Vessels instruments, machinery parts in contact with liquid / solutions etc.

Sailent Features(Cecon High Pressure Autoclave) Latest engineering techniques, designs, validation for the system to meet all norms of cGMP. Cecon double walled sterilizer, the inner S.S. 304/316 chamber and outer carbon steel or S.S. 304 jacket. The function of jacket is to improve the temperature uniformity inside the chamber and reinforce the chamber from outside.The doors are provided with diaphragm clutch locking system which operates on chamber pressure and also with additional safety features which prevent:a. Simultaneously opening of both doorsb. Opening of doors when process is onSpecially designed and door shaped gaskets for better door sealingResin bonded glass wool for better temperature uniformity and for reducing heat losses Outer cover is of S.S.304The sterilizer will be supplied with S.S. Loading carriage with shelves and a S.S. Tubular trolley.

Customized Designs are also available

Application

> Sterilizers are suitable for solutions in glass containers like ampules, vials & bottles empty glass wares, utensils, instruments etc.> Drying of vessels, machine parts, change parts, rubber bungs etc.> Porous material like laboratories dresses, gloves, masks etc.> Bulk power sterilization

Controls

Cecon sterilizers have specially designed control system for process automation. The sterilizer will be provided with all mounting and fittings such as pressure gauge, compound gauge, dial thermometer, steam trap, steam inlets & outlets, safety valves. We also provide micro-based controlled processors i.e. Programmable Logical Control.

Salient Features(Cecon Vertical Autoclave)

> The chamber is usually made of S.S. 304/316 and outer carbon steel or S.S. 304 jacket. The function of jacket is to improve the temperature uniformity inside the chambers and reinforce the chamber from outside> The doors are provided with locking system for safety features which prevent opening of doors when process is on> Specially designed and door shaped gaskets for better door sealing

Application

Cecon Vertical Autoclave offers the customers maximum reliability in view of conducting small batches or operations for sterilizing like:> Solutions in glass container e.g. Ampules, Vials, Glass Bottle etc.> Empty glass utensils, Vessels instruments, machinery parts in contact with liquid / solutions etc.

Blood collection monitor is compact instrument to provides smooth &gentle rocking for homogeneous mixing with anticoagulant without clot formation of blood cell during collection of blood from donor, Provision of pausing collection & changed programmed volume during pause.

 

 

Blood Collection Monitor Blood collection monitor is compact instrument to provides smooth &gentle rocking for homogeneous mixing with anticoagulant without clot formation of blood cell during collection of blood from donor Calibration The equipment is calibrated with the help of master calibrator , which is certified for its accuracy for its accuracy by Electronic regional Testing Laboratory (ERTL) Government of India recognized testing laboratory with traceable reference to National Physical Laboratories.(NPL      Special Features Volume can be set in 1 ml. increments . Provision of pausing collection & changed programmed volume during pause Micro controller based program. Volume can be set from 1ml to 999ml. Display of weight & volume Auto tare facility to accurate for the weight of the bag Motor activated clamping at the end of the collection Audio visual alarm to alert in case of any abnormal condition Auto calibration Overload indication Highly user friendly system with LCD messages. Display of the time taken for collection Diagnostic mode for technical analysis.

> User friendly menu based on windows application program.
> Real time evalution of live sperms cells by a high resolution CMOS camera.
> Counted numbers of cells and fileds determined by users.
> Simultaneous display of live image and analyzed data on the monitor.
> Estimation of each sperm's moving pattern and velocity.
> Various analyzed data.
> Save and replay of sperms cells live image.
> Fast anaysis speed (2sec / 400 cells)
> Vaterinary application (option)

These Water bath Shakers have wide applications in Biotechnology, Micro-Biology, Chemistry, Quality Control and other life sciences laboratories.The units are double walled with exterior body and insulation in between. The stainless steel bath has size of 355 mm (W) x 300 mm (D) x 165 mm (H). A special pyramid type cover provided avoids evaporation of water and makes condensed water to fall back in the bath. A cock is provided to facilitate draining of Bath contents.

The removable stainless steel tray houses lotus clamps for variety of flask capacities. Standard units are supplied with tray accommodating 12 flasks x 100 ml. Trays with the following capacity are available optionally. 50 ml x 12 flasks 150 ml x 9 flasks250 ml x 6 flasks 500 ml x 4 flasks1000 ml x 2 flasks 2000 ml x 1 flaskTest Tube racks Salient Features > Inner chamber and outer body of SS 304> Heating up to 95C> Di g i t a l Temp e r a t u r e I n d i c a t o r c um Controller with precise accuracy of 1C> A Shaking speed range from 40 to 180 strokes special pyramid type cover provided avoids per min>Stroke length 25 mm Supply: 220-240 Volts 50 Hz Single Phase.

We are the main supplier of this product.

The idea behind development of the said Furnace is to help the people of the nation, population is increasing day by day. It is indeed a news of pleasure that the death rate is reducing but the number of cremation are increasing day by day.

As you as all know the common method of conventional cremation is by putting the dead on the wood pier and then set fire. The said systems have many negative points than the positives one of the religion. If you consider the damage to the atmosphere due to the improper combustion of the wood, which generates a high volume of harmful carbon monoxide, to the human being as well as to the nature.

Second major disadvantage is the consumption of wood, a survey says that to cremate a normal adult dead body you require around 300 kgs. of wood and to meet such requirement we also harm our forests and thereby disturbing the rain cycle due to thinning of forest land.

Now to compare the above cost with the cost of cremation in electricity operated cremation furnaces, it consumes around 200 kwh. For Cremation at the rate of 4 to 5 dead bodies per day. If we consider unit price Rs. 4=00 per unit, it will come to Rs. 800=00 per day to maintain the Temp. upto 650oC, (Recommended for the proper cremation). The cost of cremation in electrical works out to Rs. 200=00 per Cremation this will definitely too less compared to wood.
Above all the electrical crematoria gives a better, hygienic, nature friendly odorless cremation which are most required in the big cities. Where now a days crematoria grounds are in the center of the city.

Salient Features

Modern Design
"CECON FURNACES" are designed with the all modern design features, unlike our competitors. We never believe to enforce age old designed on our customers. The CECON cremation furnaces are built with the use of modern insulating material like ceramic fibre, high alumina element holding refractories, calcium silicate boards etc. to ensure low thermal losses and highest possible efficiency.

Sturdy Construction
The "CECON FURNACES" built to last longer than constructed with superior quality of mild steel sheets, Angles and Structural material of adequate thickness as per our standard practice to work under required heavy duty requirements of our valued patterns.

Best Performers
The "CECON" Cremation Furnaces are semi automatic and can be operated with ease. The door operates with the touch of button (Optionally). A unique temperature indicating controller can control the temperature inside the cremation specially designed clean-out tools, allow for quick and easy removal of remains from the chamber.

> Accurate analsis of morphology by high technology.
> Classification of stained sperm cells for morphology.
> Improved analysis speed (2 sec /10 cells).
> Report of the statictic data (normal, abnormal and border line).
> Magnification of each sperm cell for optimal morphology analysis.
> Application to high tach filtering method.
> Veterinary application (option)

Fujifilm Dry Imagers mark a revolutionary breakthrough in dry imaging. They all provide extraordinary imaging capabilities, from clear and precise images with high diagnostic value, to advanced image networking potential. From small clinics to radiology departments in busy general hospitals, theres a Fujifilm DRYPIX imager exactly suited to every workload requirement.

Micro controller based Blood Bank Scale is designed for weighing Blood and blood Components. It can accurately measure the volume of blood components as the specificgravity of all components is taken into consideration. The equipment is calibrated with the help of master calibrator, which is certified for its accuracy by Electronics Regional Testing Laboratory (ERTL West) Government of India recognized testing laboratory with traceable reference to National Physical Laboratories (NPL).

Manufactured from the optimum quality raw materials, our Plastic Waste Bin is highly durable.

Our Garbage Waste Bin is light in weight, thus easily movable. We have firmly positioned ourselves as one of the distinguished Pedal Push Waste Bin manufacturers and suppliers based in India.

> Simple & cost effective fermenter system for colleges, universities, industries and research centers.
> Capacity of bottle is 1000ml which has working capacity 700ml
> Most commonly used for mass multiplication of bacterial and fungal cultures
> Used for development of seed medium
> Designed for aerobic fermentation.
> Systems is easily detachable for maintenanace.
> Minimum maintainance cost
> Effcient systems for R & D

Addional Features Of JBFS - 02

Bottle

> Bottle has screw cap and top plates contain ports for temperature, air inlet, vent, sampling and additional feed.> Baffles for effective mixing and to avoid vortex formation.

Temperature
Temperature is indicate by indicator by use of PT 100 sensor.Temperature is mainteined by temperature controller with the help of hot plate magnetic stirrer.

Sampling

By applying positive pressure, sample can be taken at regular intervals to check growth pattern of micro organism and sterility testing

Additional Port

For adding acid, alkali, anti foam or any extra feed if required

Designed to meet requirements of laboratories demanding wide flexibility of stirring operations, these stirrers are available in various models. Choice of model will be dependant on the batch size /volume to be stirred. Salient Features > Multipurpose stirrers for general purpose & PUF stirring.> Pulley driven / Heavy duty stirrers for polit plant, bench scale process & small batch production.> Models also available with digital speed indicator for speed indication & process validation. PMDC Lab stirrers PMDC Stirrers are specially designed for routine laboratory work, research and development. QA analsis and sample preparations. Stirrers have uniform speed control with digital RMP indicator which goves speed read outs, valuable for applications where process validation and reproducibility required. RQ-121/D. RQ-123/D and RQ-129/D models use direct drive motors & are ideal for day to day laboratoty use with aqueous & low viscosity liquids such as light oils. Sailent Features : > PMDC motor for powerful stirring.> Reliable performance even in continuous use.> Stepless eletronic speed regulator with digital display.> Hollow shaft in geared models permotting height adjustment.> Chuck for easy interchangeability of shaft.> Strirring shaft SS346; Retort Rods SS304.

An elegant design focused on superior, safety & hygiene, combined with maximizing comfort for the donor & the operator. The intelligent design significantly reduces the incidence of vasovagal attacks associated with blood donation.Quick Conversion to “shock position” within 10 seconds of actuation. Single profile design ensures that the donor position remains unchanged during conversion to the “shock Position” minimizing additional discomfort to the donor. The wedge shaped armrest aids a good venipunture thereby facilitating optimal blood flow. The resting surfaces are designed with every type of donor in mind – even the tallest donor will be comfortable on the comfy couch & a swing – out armrest facilitates seating.

 

An elegant design focused on superior, safety & hygiene, combined with maximizing comfort for the donor & the operator. The intelligent design significantly reduces the incidence of vasovagal attacks associated with blood donation. Superior Design Quick Conversion to “shock position” within 10 seconds of actuation. Single profile design ensures that the donor position remains unchanged during conversion to the “shock Position” minimizing additional discomfort to the donor. The wedge shaped armrest aids a good venipunture thereby facilitating optimal blood flow. The resting surfaces are designed with every type of donor in mind – even the tallest donor will be comfortable on the comfy couch & a swing – out armrest facilitates seating.

Safety Unique position of the feet ensures adequqte blood supply to the head consistent with the hermodynamic of the body , thus minimizing the incident of Vasovagal Attack . Our Couch  remote control buttons are logically placed to avoide any confusion during operational that may involve the donor or the operator. Low centre – of – gravity ensures that the Comfy Couch is very stable & dose not tip over. The donor Couch has the provision for placing all devices & accessories required for the donation – this helps avoid RSI (Repetitive Strain Injuries). Hygiene Single profile design ensures that all surfaces are smooth & easy to clean . Smooth dust resistant construction Removable trays for all the accessories facilitates easy cleaning. Special featurers Volume can be set in 1 ml. increments . Provision of pausing collection & changed programmed volume during pause Micro controller based program. Volume can be set from 1ml to 999ml. Display of weight & volume Auto tare facility to accurate for the weight of the bag Motor activated clamping at the end of the collection Audio visual alarm to alert in case of any abnormal condition Auto calibration Overload indication Highly user friendly system with LCD messages. Display of the time taken for collection Diagnostic mode for technical analysis. Technical Data

Bioline Technologiesmarkets products for personal hygiene. It Includes'Saniclean 2000Sanitary Napkin Burning Incinerator. Bioline combines product excellence with comprehensive after sales service. Our uniqueness is to develop products that address every single requirement in most cost effective way. The designing and manufacturing is done under the guidelines of GMP/UNICEF /MOEF /Ministry of Water & Sanitation and medical device standard ISO 13485. As technology continues to evolve, Bioline Technologies will keep abreast of the latest industry standards while maintaining technical support for previous generations of technology. And that is our motto.

Model SaniClean 2000 Easy to operate, maintain & works automatically on preset cycle every day. Napkin Disposal Machine is incorporated with a temperature controller which works on ON / OFF system to keep the temperature constant throughout the process. Napkin Disposal Machine is having an emission outlet the room for the fumes developed during the Incineration. Napkin Disposal Machine is lightweight & can be fixed on the wall with easy installation for the convenient use in the toilets. Napkin Disposal Machine is used to destroy soiled sanitary napkins both scientifically & hygienically. The Incinerator can be installed inside the room with SMOKE REMOVAL UNIT with absolute zero emission. The ash is collected in a tray present at the bottom of the Incinerator. The duration to destroy 20 Napkins is approximately half an hour. Low power consumption & can work on invertors. Only CE marked Product. Where to use Hostels/ Resorts / Tourist Girls school & colleges Airports, Railway & Bus station Public Toilets Hospitals, Waiting / Rest rooms Shopping mall & complexes Spinning mills, factories Offices IT companies them parks. Waiting / Rest rooms Movie malls Women Hostels.

Micro controlling Plasma Thawing Bath is a tabletop model for quick thawing of plasma at 37 degree. There is an audiovisual alarm if the temperature deviates from preset temperature along with display of set value and process value. It has a smooth acrylic tray for accommodating plasma bags. Thawing Bath which we manufacture has integrated pump for internal circulation and it maintains precise temperature uniformity throughout the liquid medium. Foamed in place PUF insulation improves temperature stability and energy efficiency. The outer chamber is of mild steel duly powder coated. Inner chamber is made of SS304. One of the leading Blood Bank Thawing Bath Exporters and Suppliers in India we make quality our prime concern and customer our main focus.

Key Points: Our Vending Machine can be calibrated to accept coins of any country. Our Vending Machine can be catered to specifications of the Sanitary Napkins of any brand. Our Vending Machine can be solar operated, manufactured for areas with no power supply. Advantages of SANI-Vend: Immediate access to napkins anytime of the day to meet the menstrual emergencies. Self dispensing of the Napkin at the drop of coin. Saves the embarrassment of seeking napkins in the peer group or from authorities.

Features:

• High solid state Electronic Technology
• Battery Backup for 10 days.
• It also works on Solar Energy (Optional).
• Available in various Models.
• Coin mechanism programmable for various denominations.
• Physical inspection window for availability of Napkins
• Wall Mountable.

Technical Specification:

• Housing: Mild Steel Powder Coated
• Model: SANI Vend
• Product Value: Programable - Coin Operated
• Capacity: 100 Napkins
• Dimension (WxHxD): 566x105x540mm
• Net Wt.: 15 Kg.
• Watts: 5W
• Power: 110V/220V
• Warranty: 1 Year

Where to Use:

• Hostels/Resorts/Tourist
• Girls Schools & Colleges
• Airports, Railway & Bus Station
• Public Toilets
• Hospitals
• Shopping Malls & Complexes
• Spinning Mills, Factories
• Offices
• IT Companies
• Theme Parks
• Waiting/Rest Rooms
• Movie Malls
• Women Hostels

Direct Driven High Vacuum Pumps are designed to meet the requirement of high vacuum applications of Freeze Drying. The Pump comprises of two stage offset rotary vane arrangement with a special inbuilt oil pump to take care of oil circulation and to assure continuous silent operation under high vacuum. Operation of the pump with the inbuilt gas ballast valve in open condition warms up the pump thereby preventing vapour condensation inside the pump. This increases the water handling capacity and thereby makes them ideal for use in Freeze drying operations.

Product code	Description
VP001	Vacuum Pump 100 LPM
VP002	Vacuum Pump 200 LPM
VP003	Vacuum Pump 250 LPM
EMF10	Oil Mist Filter

In clean room or biologically clean room, the greatest source of dust and bacteria is human being. Therefore, it becomes essential to install AIR SHOWER for control of contamination at the entrance leading to the clean room. Air Shower prevents a person entering the clean room from carrying with him dust and bacteria adhering to his body, clothing etc. Through air jets produced by the clean air circulatory system of the equipment. Air Shower also provides and effective air lock system which restricts the clean area in the event of door opening. Principle of Working As the person enters the shower room, the start switch activates the pre-selected shower time to produce flood of high velocity low pressure clean air through the fourteen concentric nozzles which washes away dust particles and other contamination adhere to the body and the same is swept away through the filtration media provided at the floor level exhaust of the equipment. The electronic timer also activates magnetic locking system of the unit which is synchronized with the Air Shower timing for entry and exit. High efficiency Micro-filtration medias are used for cleaning & recycling of the clean air in the Air Shower upto efficiency to produce Class 100 or Class 10000 clean air. Specification Cecon Air Shower is available in two models for single person entry & two person entry, having strong Galvanoized SS body construction, fitted with double Aluminium Frame Doors provided with glass panels. Illumination with two Fluorescent tubes, air cycle controlled through fan blowers assembly. High velocity air is discharged through the SS air shower nozzles. Filtration of air through set of micron filters having high quality HEPA filter with pre-fitted filtration element with cleaning efficiency 99.99% at 0.3 micron and Pre-Filter (washable) for return air. The noise level is less than 70 db during operation. The doors are provided with interlocking by solid-state electronic/microprocessor controlled magnetic door locking system. Air Flow is permanently lubricated direct drive centrifugal blower. Supplied complete with inbuilt control panel, operating switches, indicator lamps and four core lead connection. Easy to clean Stainless Steel Flooring, Emergency Escape Button, Automatic Swing Door, inbuilt Lighting Screen showing Text/Operating Instructions. Air Velocity = 20 MPS, Air Change > 350 times/hr., Fluorescent Light 20 Watts, 4 Nos. Application Cecon Air Shower - 'Clean Room Entry System' is ready to use equipment and find high utility applications in many industries and quality control divisions of:> Electronic and Pharmaceutical Industries> Research Centres> Semi-Conductor> Processing Areas> Computer Manufacturing and many other places requiring restrictive clean room entry.

We are the main supplier of this product.

Our range of Incinerators offers you the complete solution to your waste management problem from hospitals to industrial units, Bioline is the preferred choice for any type of waste management problem. BIOLINE INCINERATORworks on the principle of thermal destruction i.e. conversion of waste into ash by incineration at controlled temperatures. Our ecofriendly incinerators ensure total incineration with no unburnt residue and meet the emission standards laid down by the Pollution Control Board. Bioline's unique Digital Control Panelwith Digital Temperature Indicator & Controller ensures that electrical supply is automatically cut off on achieving the required temperature inside the Incineration Chamber, thus helping you save on electricity consumption.

Features Complete Solution- electrical and oil-fired models suitable for all types of waste Customized- available in all sizes with accessories, starting from 5 Kg. Convenient- Easy to install, easy to maintain and easy to use Safe- for the operator and for the environment Sturdy- built with MS Steel & well insulated Dual Chamber Construction Efficient- 99% Combustion efficiency Fuel Efficient- Economizes use of fuel and leaves no unburnt residue Trouble Free Performance All types of Pollution Control accessories available Quick disposal of hazardous hospital waste Protect environment & fight pollution by total Incineration Eradicate Infection and contamination spreading source Maintain clean & healthy pollution free surroundings of your Hospitals / Nursing Robust ConstructionBIOLINE INCINERATORS are constructed with Mild Steel and the body is reinforced with M.S. Angle. The body is painted with heat resistant paint. Incineration Chamber is insulated with high quality ceramic and rock wool blankets and refractory is made up of high grade Alumina and insulating bricks. The Incinerator comprises of two chambers, with heating at Primary Chamber 800oC50oC for burning waste and Secondary Chamber 1050oC50oC for exhaust gas combustion. Front Loading TypeA solid and sturdy unit having continuous front loading system. The Incineration chamber is made of Stainless Steel with ASH disposal from the bottom through ash scrapper. The heating in this Incinerator is done through Heating Elements of Kenthal A1/Nicrome Grade which are designed to work on low watt density thus ensuring long life of heating elements. The system is attachable to all types of Pollution Control Accessories. Available in capacities ranging from 5kg/hr to 500kg/hr. Suitable for wet/semi-wet and dry waste.

To complete the cycle and seal ampoules in the best possible condition, secondary drying manifold is used. 48-Port Manifold can be doubled to hold 96 ampoules by using the additional manifold supplied with a 'T' piece for connection.

8 - Port Acrylic Drum Manifold can be used with all three models of Lyodel.Manifold sealing gaskets are also supplied with this accessory.

8-Port or 24-Port Column Manifold is useful for drying of small volume of liquids in flasks. It is provided with quick seal valves for holding flasks up to 1 litre capacity. Manifold sealing gaskets and cone connectors are also supplied with this accessory.

The basic function of this manually operated isolation valve is to isolate the drying accessory and sample from the ice condenser and pump. This is also useful in injecting inert gas before sealing the vials and for determining the dryness of the sample by measuring the vapour pressure in the drying accessory.

Product code	Description
VSI VO1	Isolation Valve

Bulk Drying Accessory ( Chamber, Racks & Trays)

The system has acrylic vacuum chamber with lid and upto five shelf rack assembly and trays. The acrylic vacuum chamber gives a clear view of the product and transmits radiant heat energy for drying. It is easily sealed by drop on acrylic lid with lead through for heater accessories. A conveniently designed rack supports up to 5 one litre stainless steel trays, and is ready wired to accept low voltage, heater pads under each tray. The design allows selection of any tray & heater combination for maximum utilization. It can be easily lifted in and out of freezer units. This system can also be used with temperature control unit for careful control of drying rate.

Product code	Description
BA02200	Bulk rack assembly with acrylic cylinder to accommodate rack & 2 trays of 200 x 20 mm (dia x h)-For Mini Lyodel only
BA02230	Bulk rack assembly with acrylic cylinder to accommodate rack & 2 trays of 230 x 20 mm (dia x h)
BA03230	Bulk rack assembly with acrylic cylinder to accommodate rack & 3 trays of 230 x 20 mm (dia x h)
BA05230	Bulk rack assembly with acrylic cylinder to accommodate rack & 5 trays of 230 x 20 mm (dia x h)

Heater Control Unit

The heater control unit is a freestanding power supply unit designed to deliver a thermostatically controlled low voltage power supply to the heaters. The heat energy produced by the heater mat under each shelf enhances the drying rate.

Product code	Description
VSHC01	Heater control unit

Fujifilm Dry Imagers mark a revolutionary breakthrough in dry imaging. They all provide extraordinary imaging capabilities, from clear and precise images with high diagnostic value, to advanced image networking potential. From small clinics to radiology departments in busy general hospitals, theres a Fujifilm DRYPIX imager exactly suited to every workload requirement. General Usage Film Super HR-T30/HR-U30 Super HR-T30 is a new high-contrast, high-resolution film for general radiography that provides consistently superb image quality. Super HR-U30 is a practical all-round film for general applications. AD System for Chests The Fujifilm AD System is an orthochromatic system that incorporates advanced technologies to provide high speed and sharpness with exceptionally low noise. Mammography Film Systems AD Mammography System The Fujifilm AD Mammography System offers the latest film and screen technological advancements to ensure optimal image quality for mammographic applications. The system is designed to yield extremely high-contrast, D-max and sharpness with minimal noise. UM-MA HC Film UM-MA HC is a blue-base singleemulsion orthochromatic film for mammographic applications.

> 6 Types of Flasks ranging from 50 ml to 3000ml.> HAHNVAPOR is Equipped with speed control> Digital Water Bath Covers Ambient Temprature up to 180> If water Level At Heating bath goes Down, Power will be Cut Off automativally.> Speed Control 20 280 rpm.> Slant Condencer .> Standard Distillation.

PCR & RT PCR Polymerase chain reaction (PCR) is an important tool for the detection od DNA and RNA with application across all biotechnology / molecular biology research, including forensics, gene expression, identification and discovery. Tradional PCR has relied on agorose gelbased end point detection of the reaction, in the plateau phase, This has been time consuming, not very precise and with a degree of sample to samples variability. Real time PCR combines the amplification and detection steps into one single procedure, saving time. Real time PCR measures sample during the exponential phase of the PCR reaction and produces results while the reaction is in progess. This achives detection accuracy from very low initial concentrations of starting material. Real Time PCR is sufficiently sensitive to detect as low as 2-fold changes, allowing discrimination in yields that are not possible to achieve with Agarose gels. Features > Gradient function creates a temperature gradient of 24C across the sample block.> Volume sensor software automatically adjusts ramp rates tom accommodate differences in sample volumes.> A blue light diode for fluorescent dye excitation.> A direct current constant power supply improves thermal efficiency, performance and stability while reducing power consumption by 30% over compararively sized models.> An automatic hot lid with adjustable temperature.> All data is saved automatically in the event of a power failure occuring during the reaction.> An automatic over temperature function sounds an audible warning at excessive temperatures and automatically shuts down the instrument.> Ramps rates can be adjusted to allow the direct application of established protocols.> Advanced multi-point temperature control and monitoring permits more accurate and uniform temperature control throughout the heating block.> The system automatically holds samples at 4 C following completion of the cycle. This sample hold can be adjusted to any temperature.

Fujifilm Dry Imagers mark a revolutionary breakthrough in dry imaging. They all provide extraordinary imaging capabilities, from clear and precise images with high diagnostic value, to advanced image networking potential. From small clinics to radiology departments in busy general hospitals, theres a Fujifilm DRYPIX imager exactly suited to every workload requirement. DRYPIX PRIMA The DRYPIX PRIMA is a compact and lightweight unit that can be located on a tabletop or workbench making it particularly suitable for sites with limited space.The DRYPIX PRIMA's built-inDICOMPrint Server ensures fast, error- free connection, for instantaneous communication with anyDICOMprint- compliant modality on the net work. Features > 5 sizes of film are available by changing film trays> Clean and user-friendly dry processing> Speedy output of up to 70 films an hour DRYPIX 4000 The DRYPIX4000 combines proven reliability and convenience with remarkable operating efficiency, all in a compact body. Boasting unrivalled image quality, networkability, backup security and accessible price, DRYPIX4000 is the ideal imager for small- to medium-sized hospitals. Features > Adaptable to broader needs from small clinics to general hospitals> Superb capability realized by high maximum density (enables mammography use)> Available in a wide range of film sizes> Fits anywhere, allowing maximum freedom of placement within the medical facilities DRYPIX 2000 DRYPIX 2000 is a compact and efficient tabletop dry imager. It supports multiple film sizes and is expandable to two magazines. The DRYPIX 2000 is an optimal choice for small clinical settings or as a part of a dispersed systemin large hospitals. DRYPIX 7000 The remarkably efficient DRYPIX7000 is designed as a centralized imager with a maximum of three film trays. It has a built-inDICOMprint server, enabling easy connection with allDICOMmodalities through the network. Features > FUJIFILM's flagship model dry imager> High speed and high resolution imaging, ideal for large-scale data processing in general hospitals> Available in a wide range of film sizes> Fits anywhere, allowing maximum freedom of placement within the medical facilities

Stainless Steel Drum Manifold is available in 12 as well 16-Port versions. Each port is supplied with quick seal valve for holding flasks. Top and bottom manifold sealing gaskets are also provided. Drum manifolds are also useful for bulk drying in trays and beakers inside the drum.

Designed for the low temperature experiments of electronic components and other special materials, for storage of blood plasma, biological materials, vaccines etc.Used in research institutes, laboratories in electronic or chemical industries, blood banks, hospitals, epidemic prevention centres

Temperature ControlTemperature adjustable range in Cabinet: -25oC -40oCHigh & low temperature alarm can be set as required

Safety SystemTwo alarm conditions ( higher or lower temperature alarm, sensor malfunction alarm)Two kinds of alarm indicators ( audible buzzing alarm, visible flashing alarm)

Refrigeration SystemDanfoss compressor and Germany EBM condenser fan support excellent refrigerationThe temperature in cabinet can drop to -40oC in 25oC ambient temperature in 2 hoursHigh density insulation foam guarantees the cabinet temperature effectivelyReasonable design of evaporator and condenser guarantee perfect freezing performanceCFC-Free refrigerant

Ergonomic DesignSafety lock to prevent unauthorized access40 Test hole for testing (DW-40W380 is exclusive)Broad voltage tolerance design, applicable for voltage range 198v252vAnti-corruption step cabinet design, applicable for various of baskets