Series CCS Current Switch

Series CCS Current Switch

Solid or Split Core, LED Visual Confirmation, Fixed or Adjustable Set Point

The SERIES CCS Current Switches are ideal for monitoring the operating status of fans, pumps, and motors. These self-powered switches can be hung or tied directly to cables or wires. For use on existing installations, split core models can be installed without disconnecting cables. LED indicators provide a visual confirmation that the current is flowing through the core. Both fixed and adjustable set points are available. The adjustable models utilize a potentiometer to easily adjust the set point.

Product Applications

• BAS
• HVAC

ModelDescription

• CCS-111100Current switch, solid core, adjustable, normally open, red/green LED, min. set point 1.00.
• CCS-121050Current switch, solid core, with fixed set point @ 0.50, normally open, red LED.
• CCS-131100Solid core current switch with an adjustable set point at 1.0 A, normally open output
• CCS-211150Current switch, split core, adjustable, normally open, red and green LED, min. set point 1.50.
• CCS-221100Current switch, split core, fixed, normally open, red LED, min. set point 1.00.
• CCS-231150Current switch, split core, adjustable set point with min. set point 1.5, normally open output

Specifications

• Amperage Range:0 to 200 A AC.
• Maximum Switch Rating:For fixed set point models: 0.3 A @ 135 VAC/DC; For adjustable set point models: 1 A @ 240 VAC.
• Output:Normally open, NPN.
• Power Requirements:None, self-powered.
• Temperature Limits:-22 to 158F (-30 to 70C).
• Humidity Limits:0 to 95% (non-condensing).
• Isolation Voltage:2000 V.
• Frequency:40 to 400 Hz.
• Enclosure Rating:UL, 94 V-O flammability rated, ABS plastic housing.
• Approvals:CE, cUL, UL.

Features

• Integral mounting flange for quick installation
• Solid core or split core configurations
• LED Indicator

miniature current switch

series mcs miniature current switch

low cost, solid or no core, led confirmation, adjustable set point

the series mcs miniature current switches are ideal for monitoring the current usage in fuse boxes and small control panels. Both models have adjustable set points and led indication to show there is power to the unit and when the switch activates. Set points can be adjusted using the potentiometer next to the leds. Due to the size of the switch, it is only offered in solid core and no core versions. The no core version has terminal blocks which can accept currents up to 1 a directly into the unit.

product applications

• bas
• hvac

modeldescription

• mcs-111001no core terminal connect mini current switch.
• mcs-111050solid core mini current switch.

specifications

• amperage range:mcs-111050: 0.5 to 50 a ac continuous; mcs-111001: 0.01 to 1 a ac continuous.
• output rating:isolated, n.o. 0.3 a @ 130 v dc/ac.
• power requirements:none, self-powered.
• hysteresis:1%.
• response time:

series scs current switch

series scs current switch

optional relay output, solid or split core case

the series scs low cost current switches are ideal for monitoring whether fans, pumps, or motors are operating. The current flowing through the core of the device powers the circuit without an external power supply. All models have a built in solid state output and are easy to install. Optional led's and 10 amp relay modules are available. The series scs is available in both split and solid core configurations.

product applications

bas

hvac

modeldescription

• scs-111100solid core current switch with adjustable set point, amperage range 1 to 135 a.
• scs-111100-rsolid core current switch, adjustable set point, with attached control relay, amperage range 1 to 135 a.
• scs-120025solid core current switch with fixed set point at 0.25a, amperage range .25 to 200 a.
• scs-211125split core current switch with adjustable set point, amperage range 1.25 to 135 a.
• scs-211125-rsplit core current switch, amperage range 1.25 to 135 a. Adjustable set point, with attached control relay.
• scs-220015split core current switch with fixed set point at 0.15a, amperage range .15 to 200 a.
• scs-220150split core current switch with fixed set point at 1.5a, amperage range 1.5 to 200 a.
• scs-220150-rsplit core current switch, amperage rating 1.5 to 200 a, fixed set point at 1.5a, with attached control relay.

specifications

• output:isolated, 1 a @ 30 vac/dc max, no.
• external relay:spst n.o., 10a at 260 vac (5a at 30 vdc).
• power requirements:none, self-powered.
• temperature limits:5 to 140f (-15 to 60c).
• isolation voltage:600 vac rms.
• frequency:50/60 hz.
• enclosure rating:ul, 94 v-o flammability rated, abs plastic housing.
• agency approvals:ce, cul, ul.

features

• integral mounting flange for quick installation
• solid core or split core configurations

related products

• series ad air/duct temperature sensor
• series ad air/duct temperature sensor
• series rhp humidity/temperature transmitter
• series rhp humidity/temperature transmitter
• series ccs current switch
• series ccs current switch

thermal dispersion flow switch

series tds thermal dispersion flow switch

adjustable switch point, led indication

the series tds thermal dispersion flow switch offers solid state flow detection of non-coating liquids for pump and process protection. Spdt output allows for interfacing with remote plc or relay control device. The adjustable switch point is factory calibrated at 0.2 fps with led indication of flow and calibration status. Units feature selectable no or nc operation and are not damaged by over-ranging flow velocities.

modeldescription

• tds112thermal dispersion flow switch, pp/pps wetted parts, 3.0" (7.6 cm) length.
• tds122thermal dispersion flow switch, pp/pps wetted parts, 4.5" (11.4 cm) length.
• tds212thermal dispersion flow switch, pvdf wetted parts, 3.0" (7.6 cm) length.
• tds222thermal dispersion flow switch, pvdf wetted parts, 4.5" (11.4 cm) length.

specifications

• service:liquids.
• wetted materials:polypropylene/pps or polyvinylidene fluoride.range:
• range: 0.04 to 10 fps (1.2x10-2 to 3.05 m/s)
• temperature limits:32 to 140f (0 to 60c).
• pressure limits:150 psi (10 bar) @ 77f (25c), derated @ 1.667 psi (.113 bar) per c above 25c.
• repeatability:5% of setpoint.
• switch type:spdt.
• electrical rating:60 vac/60 vdc @ 1 a.
• electrical connections:22 awg 3-wire, 10 ft (3 m) length.
• process connections:3/4" male npt.
• mounting orientation:any orientation, for pipe sizes 3/4" to 1-1/2" use 3.0" (7.6 cm) length switch; for 2" to 16" pipe sizes use 4.5" (11.4 cm) length switch.
• setpoint adjustment:0.04 to 3 fps (1.2x10-2 to .91 m/s).
• setpoint drift:0.5% of setpoint.
• response time:1-10 seconds.
• viscosity range:1 to 200 centipoise.
• supply voltage:12 to 36 vdc.
• consumption:50 ma (nominal).
• indication:led for flow status.
• weight:3 oz (94 g).
• agency approvals:ce.

related products

• series sfi-800 sight flow indicator/transmitter