Enviro Tech Industrial Products

Gandhi Nagar, Delhi

GEMTECHMinihelic Differential Pressure Gauge Range 0-50 MM

GEMTECHMini Differential Pressure Gauges Are Typical Of The Concise Structure, Small Size, Lower Energy Consumption And High Accuracy. This Product Is Fully Applicable To Any Occasion. The Shell Is Made From Mineral And Glass-Flled Nylon. And The Lens Is Made From Polycarbonate. The Gauges Can Work Under Heavy Pressure, Blast, And The Maximum Pressure Can Be Up To 30 Pound/ Square Inch. 2.067 mb. When Pressure Is Too Great, The Rupture Disk Which Is Connected To Diaphragm Can Protect The Product.

SPECIFICATION

• Size - 2-29/32 Inch (73.82 MM) 2-7/16 Inch (61.93 MM)
• Weight - 6 oz (170.1g)
• Rated Total Pressure- Rated Total Pressure: 50 Pound/ Square Inch(3.445 Milli Bar)
• Accuracy - 5% of FS at 70F (21.1C)
• Connections - Barbed, for 3/16" ID Tubing (Standard); 1/8" Male NPT (Optional)
• Housing - Glass Filled Nylon; Acrylic Lens.
• Temperature Limits - 20 to 120F (-6.67 to 48.9C).
• Paint - Black
• Standard Fitting - 2 Pcs 4-401-5/8 Inch Construction Bolts 2 Pcs 4-40 Hexagonal Nuts 1 Pcs 0???050 Inch Hexagonal Spanner 1 Pcs Bracket Of Panel Mounting.
• Specifications - 125 Pa, 250 Pa, 500 Pa, 750 Pa, 1 KPa, 2 KPa.

GEMTECH Differential Pressure Gauge Range 0-100 KPA

GEMTECHMagnehelic Gauge Range 6-0-6 MM

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHDifferential Pressure Gauge Range 0-500 MM

Series G2000GEMTECHDifferential Pressure Gauges

Series G2000, GEMTECHDifferential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21 140 6 60
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70 21 3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-25 MM

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-100 Pascals

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-25 Inches

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-10 Inches

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-20 Kilopascal

Series G2000 GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMinihelic Differential Pressure Gauge Range 0-25 MM

GEMTECHMinihelic Differential Pressure Gauge

Combining High Accuracy, Compactness, Dependability, And Low Cost Combining Clean Design, Small Size And Low Cost With Enough Accuracy For All But The Most Demanding Applications Our Nextech Minihelic Differential Pressure Gauge Offers The Latest In Design Features For a Dial Type Differential Pressure Gage. It Is Our Most Compact Gage But Is Easy To Read And Can Safely Operate At Total Pressures Up To 30 PSIG.

NIST CALIBRATION Available In Product Configurator.

PRODUCT APPLICATIONS

• Room Positive Pressure Sensing
• Local Indication on Filter Status
• Face Velocity on Fume Hood
• Duct Pressures
• Cabinet Air-Purging
• Air Samplers
• Electronic Air Cooling Systems
• Laminar Flow Hoods

SPECIFICATIONS

• Service:Air And Compatible Gases.
• Wetted Materials:Consult factory.
• Housing:Glass Filled Nylon; Polycarbonate Lens.
• Accuracy:5% of FS at 70F (21.1C).
• Pressure Limits:30 psig (2.067 bar) Continuous To Either Pressure Connection.
• Temperature Limits:20 to 120F (-6.67 to 48.9C).
• Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
• Process Connections:Barbed, for 3/16" ID Tubing (Standard); 1/8" Male NPT (optional).
• Weight:6 oz (170.1g).
• Agency Approvals:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE NON-CORROSIVE GASES.

FEATURES

• Removable Lens And Rear-Housing Provides Easy, Cost-Effective Servicing
• Accuracy And Value Provides An Excellent Solution For OEM And User Applications
• Durable Housing Materials Make It Well-Suited For Rough Environments And Total High Pressure

GEMTECHMagnehelic Gauge Range 50-0-50 Pascals

Series G2000 GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-6 MM

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECH Instruments Digital Differential Pressure Gauge

With The Valuable Assistance Of Skilled Team Of Professionals, We Are Engaged In Offering An Extensive Range Of High-QualityGEMTECHDigital Differential Pressure Gauge.

GEMTECHDigital Differential Pressure Gauge

With The Valuable Assistance Of Skilled Team Of Professionals, We Are Engaged In Offering An Extensive Range Of High-QualityNextech Digital Differential Pressure Gauge.

GEMTECHMagnehelic Gauge Range 0-5 Inches

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECH Magnehelic Gauge Range 30-0-30 Pascals

Series G2000 GEMTECH Magnehelic Gauge

Series 2000,  GEMTECH Magnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature -  -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - ±2% of full span at 70???(21??????(±3% on -0, and ±4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-5 Kilopascal

Series G2000GEMTECHMagnehelic Gauge

Series G2000, NextechMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-50 Inches

Series G2000 GEMTECHMagnehelic Gauge

Series 2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-2.5 Kilopascal

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-10 MM

Series G2000 GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMinihelic Differential Pressure Gauge

GEMTECHMinihelic Differential Pressure Gauge

Combining High Accuracy, Compactness, Dependability, And Low Cost Combining Clean Design, Small Size And Low Cost With Enough Accuracy For All But The Most Demanding Applications Our Nextech Minihelic Differential Pressure Gauge Offers The Latest In Design Features For a Dial Type Differential Pressure Gage. It Is Our Most Compact Gage But Is Easy To Read And Can Safely Operate At Total Pressures Up To 30 PSIG.

NIST CALIBRATION Available In Product Configurator.

PRODUCT APPLICATIONS

• Room Positive Pressure Sensing
• Local Indication on Filter Status
• Face Velocity on Fume Hood
• Duct Pressures
• Cabinet Air-Purging
• Air Samplers
• Electronic Air Cooling Systems
• Laminar Flow Hoods

SPECIFICATIONS

• Service:Air And Compatible Gases.
• Wetted Materials:Consult factory.
• Housing:Glass Filled Nylon; Polycarbonate Lens.
• Accuracy:5% of FS at 70F (21.1C).
• Pressure Limits:30 psig (2.067 bar) Continuous To Either Pressure Connection.
• Temperature Limits:20 to 120F (-6.67 to 48.9C).
• Mounting Orientation:Diaphragm In Vertical Position. Consult Factory For Other Position Orientations.
• Process Connections:Barbed, for 3/16" ID Tubing (Standard); 1/8" Male NPT (optional).
• Weight:6 oz (170.1g).
• Agency Approvals:Meets The Technical Requirements Of EU Directive 2011/65/EU (RoHS II).CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE NON-CORROSIVE GASES.

FEATURES

• Removable Lens And Rear-Housing Provides Easy, Cost-Effective Servicing
• Accuracy And Value Provides An Excellent Solution For OEM And User Applications
• Durable Housing Materials Make It Well-Suited For Rough Environments And Total High Pressure

GEMTECHMagnehelic Gauge Range 0-60 Pascals

Series G2000GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHDifferential Pressure Gauge Range 0-30 Pascal

Series G2000GEMTECHDifferential Pressure Gauges

Series G2000, GEMTECHDifferential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi.

SPECIFICATION

• Ambient Temperature - -21 140 6 60
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die Cast Aluminum Case and Bezel, With Acrylic Cover, Exterior Finish is Coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70 21 3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHDifferential Pressure Gauge Range 0-100 MM

Series G2000GEMTECHDifferential Pressure Gauges

Series G2000, GEMTECHDifferential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21 140 6 60
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70 21 3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHDifferential Pressure Gauge

Series G2000, GEMTECHDifferential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

Ambient Temperature - -21 140 6 60

Rated Pressure -20 inHg30 inHg (-68103KPa)

Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).

Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy - 2% of full span at 70 21 3% on -0, and 4% on -00)

Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECHMagnehelic Gauge Range 0-50 MM

Series G2000 GEMTECHMagnehelic Gauge

Series G2000, GEMTECHMagnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature - -21???140??????-6???60??????
• Rated Pressure -20 inHg30 inHg (-68103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - 2% of full span at 70???(21??????(3% on -0, and 4% on -00)
• Range -20 inHg38 inHg (-68KPa130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.