Enviro Tech Industrial Products

Gandhi Nagar, Delhi

Aerosense Model ASG-Ol Differential Pressure Gauge Range 0-1.0 Inch WC

ModelASG-Ol

Range0-1.0 Inch WC

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory

aerosense model asg-06 differential pressure gauge range 0-6.0 inch wc

modelasg-06

range0-6.0 inch wc

series asg differential pressure gage with adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face.

aerosense model asg-60 differential pressure gauge range 0-60 inch wc

modelasg-60

range0-60 inch wc

series asg differential pressure gage with adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face.

aerosense model asg-15 differential pressure gauge range 0-15 inch wc

modelasg-15

range0-15 inch wc

series asg differential pressure gage with adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face.

aerosense model asg-25 differential pressure gauge range 0-25 inch wc

modelasg-25

range0-25 inch wc

series asg differential pressure gage with adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face.

Aerosense Model ASG-40 Differential Pressure Gauge Range 0-40 Inch WC

ModelASG-40

Range0-40 Inch WC

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face.

Aerosense Model ASG-50 Differential Pressure Gauge Range 0-50 Inch WC

ModelASG-50

Range0-50 Inch WC

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face.

aerosense model asg-120 differential pressure gauge range 0-120 inch wc

modelasg-120

range0-120 inch wc

series asg differential pressure gage with adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face.

AerosenseSingapore Differential Pressure Gauge

Backed by years of experience of this domain, we present clients with the premium quality ofAerosense Differential Pressure Gage.Used for measurement of differential pressure, the pressure gauge is manufactured by using latest technology. In order to ensure high standards of quality, the Aerosense differential pressure gauge is procured from trusted vendors.
Features:

• Excellent measurement accuracy
• Easy to use
• Requires less maintenance

Specifications:

• Indicating Pressure Reference: Differential Pressure Gauge
• Ambient Temp.Range: -7 60 c
• Weight: 1 Lb. 2oz (510g)

aerosense model asg-30kpa differential pressure gauge range 0-30 kpa

modelasg-30kpa

range0-30kpa

series asg differential pressure gage with adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• size:4" (101.6 mm) diameter dial face.

Aerosense Model ASG-25KPA Differential Pressure Gauge Range 0-25 KPA

ModelASG-25KPA

Range0-25 KPA

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-20KPA Differential Pressure Gauge Range 0-20 KPA

ModelASG-20 KPA

Range0-20 KPA

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-15KPA Differential Pressure Gauge Range 0-15 KPA

ModelASG-15 KPA

Range0-15 KPA

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-5KPA Differential Pressure Gauge Range 0-5 KPA

ModelASG-5 KPA

Range0-5 KPA

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face.

Aerosense Model ASG-2KPA Differential Pressure Gauge Range 0-2 KPA

ModelASG-2KPA

Range0-2 KPA

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face.

Aerosense Model ASG-1.5KPA Differential Pressure Gauge Range 0-1.5 KPA

ModelASG-1.5KPA

Range0-1.5 KPA

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face.

Aerosense Model ASG-1KPA Differential Pressure Gauge Range 0-1 KPA

ModelASG-1KPA

Range0-1 KPA

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-250MM Differential Pressure Gauge Range 250 MM

Model ASG-250 MM

Range 0-250 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-200MM Differential Pressure Gauge Range 200 MM

Model ASG-200MM

Range 0-200 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-125MM Differential Pressure Gauge Range 125 MM

Model ASG-125 MM

Range 0-125 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-100MM Differential Pressure Gauge Range 100 MM

Model ASG-100 MM

Range 0-100 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

aerosense model asg-201 differential pressure gauge range 0-1 psi

modelasg-201

range0-1 psi

series asg differential pressure gagewith adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gagewith additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face.

aerosense series asg differential pressure gage

description

series asg differential pressure gagewith adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gagewith additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

filter monitoring
blower vacuum monitoring
fan pressure indication
duct, room or building pressures
clean room positive pressure indication

specifications

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• size:4" (101.6 mm) diameter dial face

aerosense model asg-202 differential pressure gauge range 0-2 psi

modelasg-202

range0-2 psi

series asg differential pressure gagewith adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gagewith additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face

aerosense model asg-203 differential pressure gauge range 0-3 psi

modelasg-203

range0-3 psi

series asg differential pressure gagewith adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gagewith additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face

aerosense model asg-204 differential pressure gauge range 0-4 psi

modelasg-204

range0-4 psi

series asg differential pressure gagewith adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gagewith additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial fac

aerosense model asg-220 differential pressure gauge range 0-20 psi

modelasg-220

range0-20 psi

series asg differential pressure gagewith adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gagewith additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face

aerosense model asg-230 differential pressure gauge range 0-30 psi

modelasg-230

range0-30 psi

series asg differential pressure gagewith adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gagewith additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-10MM + Differential Pressure Gauge Range 10 MM

Model ASG-10 MM

Range 0-10 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-30MM Differential Pressure Gauge Range 30 MM

Model ASG-30 MM

Range 0-30 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-80MM Differential Pressure Gauge Range 80 MM

Model ASG-80 MM

Range 0-80 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-0.5KPA Differential Pressure Gauge Range 0-0.5 KPA

ModelASG-0.5KPA

Range0-0.5 KPA
Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar)
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-300MM Differential Pressure Gauge Range 300 MM

Model ASG-300MM

Range 0-300 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

aerosense model asg-210 differential pressure gauge range 0-10 psi

modelasg-210

range0-10 psi

series asg differential pressure gagewith adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gagewith additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face

Aerosense Model ASG-25MM Differential Pressure Gauge Range 25 MM

Model ASG-25 MM

Range 0-25 MM

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service:Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing:Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy:2% of full scale (3%on -0, -100 Pa, -125 Pa.l0MM and 4% on -00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure:Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits:20 to 140F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size:4" (101.6 mm) diameter dial face

aerosense model asg-10 differential pressure gauge range 0-10 inch wc

modelasg-10

range0-10 inch wc

series asg differential pressure gage with adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face.

aerosense series adpi/cdpi differential pressure indicator/ transmitter

series adpi/cdpi differential pressure indicator/ transmitter

series cdpi/adpi differential pressure indicator/ transmitter with circular standard differential pressure gage cut out & 0.5% accuracy of f.s

product applications:

pharma cleanrooms
hvac
environmental
pharma machinery
across filters
hospital violation rooms
operation theatres & laboratories
precision of measurement in hvac duct pressure application makes the instrument suitable for optimization of energy & thereby its conversation is ventilation systems.

built in high and low buzzer alarm for process set parameter.
violation with acknowledgment key.
integrated 4 digit red led 7 segment display of standard 0.5" size.
analog output & rs-485 communication lead to easy integration with variable frequency drives & scada/bms systems, ahus.

aerosense model asg-12 differential pressure gauge range 0-12 inch wc

modelasg-12

range0-12 inch wc

series asg differential pressure gage with adjustable bookmarks. Indicates positive, negative or differential pressure.

series asg differential pressure gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates air & non-combustible and compatible gases pressure - either positive, negative or differential.

product applications:

• filter monitoring
• blower vacuum monitoring
• fan pressure indication
• duct, room or building pressures
• clean room positive pressure indication

• service:air and non-combustible, compatible gases (natural gas option available). Wetted materials: consult factory
• housing:die cast aluminum case and bezel with acrylic over(mp model has polycarbinate cover)
• accuracy:2% of full scale (3%on -0, -100 pa, -125 pa.l0mm and 4% on -00, -60 pa, -6mm ranges), throughout range at 70f (21.1c).
• pressure limits:-20 in hg to 15 psig (-0.677 bar to 1.034 bar); mp option: 35 psig (2.41 bar); hp option: 80 psig (5.52 bar).
• overpressure:relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• temperature limits:20 to 140f*(-6.67 to 60'c).*low temperature models available as special option.
• size:4" (101.6 mm) diameter dial face.