We are engaged in offering efficient Digital Planimeter to the customers. Measuring capacity of the Digital Planimeter is remarkably enlarged. Measuring by 6-digit pulse count enables Digital Planimeter to measure 100 times larger accumulative area than ordinary planimeters. A part of Drawings instruments, our Digital Planimeter facilitates easy calculations of Cumulative and Average Value Measurement.

• Measurement by 6 digit pulse count : This N-Series can measure the area by pulse count of 6-digits. This method enables a larger cumulative measurement of area (Up to 1Om2)

• Maximum cumulative measurement value of 10m2 : With the measurement by 6-digit pulse count, the N-Series Planimeter can measure a larger area by 100 times than ordinary Planimeter. The conventional planimeter has a maximum cumulative area to measure only 0.1m2. If measurement value shows over 0.1m2 when measuring, the display is to be reset to â��Oâ��. This requires registering the numbers of how many times these resettings are occurred. With the New PLACOM N-Series, there is no need of these troublesome procedures.

• Easy conversion function of unit and scale : KP-90N and KP-80N can convert easily the measured area value into a new area value in a newly desired unit and with a newly desired scale value. KP-92N and KP-82N can convert the unit between in2 and cm2

• Hold memory function : In cumulative measurement, this Hold Memory function is effectively used. If an error occurs in measuring, press C/AC key. Then last measured value is appeared by pulse count. Since previous measured values before error are stored, there is no need for other measurements from the beginning.

• Automatic shifting of unit to upper unit : When the measured area value overflows the displayed figures of 8 digits, the measured area value is calculated and displayed by an upper unit. When the overflow is occurred in the uppermost unit, km2, acre, the measurement can be continued by pulse count display.

• Average value measurement : In order to get better result of measurement, Mean value measurement is recommended. This measurement can be easily done on this N-Series. Measurement of an area with different lateral and longitudinal Scale can be done.

• Construction and civil engineering
• Land developing planning
• Machine designing
• Data analysis in statistics
• Architecture and interior designing
• Forestry area
• Ship designing
• Medical research
• Agriculture

We are engaged in offering efficient Digital Planimeter to the customers. Measuring capacity of the Digital Planimeter is remarkably enlarged. Measuring by 6-digit pulse count enables Digital Planimeter to measure 100 times larger accumulative area than ordinary planimeters. A part of Drawings instruments, our Digital Planimeter facilitates easy calculations of Cumulative and Average Value Measurement.

• Measurement by 6 digit pulse count : This N-Series can measure the area by pulse count of 6-digits. This method enables a larger cumulative measurement of area (Up to 1Om2)

• Maximum cumulative measurement value of 10m2 : With the measurement by 6-digit pulse count, the N-Series Planimeter can measure a larger area by 100 times than ordinary Planimeter. The conventional planimeter has a maximum cumulative area to measure only 0.1m2. If measurement value shows over 0.1m2 when measuring, the display is to be reset to â��Oâ��. This requires registering the numbers of how many times these resettings are occurred. With the New PLACOM N-Series, there is no need of these troublesome procedures.

• Easy conversion function of unit and scale : KP-90N and KP-80N can convert easily the measured area value into a new area value in a newly desired unit and with a newly desired scale value. KP-92N and KP-82N can convert the unit between in2 and cm2

• Hold memory function : In cumulative measurement, this Hold Memory function is effectively used. If an error occurs in measuring, press C/AC key. Then last measured value is appeared by pulse count. Since previous measured values before error are stored, there is no need for other measurements from the beginning.

• Automatic shifting of unit to upper unit : When the measured area value overflows the displayed figures of 8 digits, the measured area value is calculated and displayed by an upper unit. When the overflow is occurred in the uppermost unit, km2, acre, the measurement can be continued by pulse count display.

• Average value measurement : In order to get better result of measurement, Mean value measurement is recommended. This measurement can be easily done on this N-Series. Measurement of an area with different lateral and longitudinal Scale can be done.

• Construction and civil engineering
• Land developing planning
• Machine designing
• Data analysis in statistics
• Architecture and interior designing
• Forestry area
• Ship designing
• Medical research
• Agriculture