Company Information
Member Since 3 Years
Nature of Business Manufacturer
GST No. 07IJPPK0798K1ZBAsk for more detail from the seller
Contact Supplier
ELECTROMAGNETIC FLOWMETER
The D&C are flanged or insertion type
Electromagnetic flow meters used for pipe 1/2” to
above in wastewater, chemical, industrial water or
municipal application. MICROMAG has no moving
parts and has round headed self-cleaning type
electrodes designed to discourage fouling, magmeter
performs well and requires minimum maintenance in
applications where debris or sand would impede
propeller meters. There is no rotor to stop turning or
bearings to wear out. Minimal straight pipe
requirements allow MICROMAG meters to be used in
piping configurations where there is little space
between the meter and an elbow. Flow rate and total
indications are standard on all models. Flow
measurement units are customer-selected and factory
set and can only be changed in the field by an
authorized D&C TECHNOLOGIES.
ELECTROMAGNETIC FLOWMETER
The D&C are flanged or insertion type
Electromagnetic flow meters used for pipe 1/2” to
above in wastewater, chemical, industrial water or
municipal application. MICROMAG has no moving
parts and has round headed self-cleaning type
electrodes designed to discourage fouling, magmeter
performs well and requires minimum maintenance in
applications where debris or sand would impede
propeller meters. There is no rotor to stop turning or
bearings to wear out. Minimal straight pipe
requirements allow MICROMAG meters to be used in
piping configurations where there is little space
between the meter and an elbow. Flow rate and total
indications are standard on all models. Flow
measurement units are customer-selected and factory
set and can only be changed in the field by an
authorized D&C TECHNOLOGIES.
INSTALLATION AND GROUNDING
POSITIONING THE METER
These meters can be installed horizontally, vertically and radial position.
STRAIGHT PIPE RECOMMENDATION
As with most flow meters, the MICROMAG requires some straight pipe before and/or after the meter
for best accuracy. However, the ability of electromagnetic meters to average the flow across the entire pipe
allows forshorter straight pipe recommendations than most mechanical meters.
Connect with us
For Buyer 
For Seller 
Help 
Laxmi Nagar, Delhi 
Send Enquiry