In fuel tanks, the fuel level sensors are used to make accurate measurements of the fuel level. At Jaycee Technologies, we are credited with being the most reliable and trusted fuel level sensor manufacturers in India. We are based in Pune and we offer fuel level sensors that...
We are offering speed transmitters to convert output of speed transducers to 4-20 ma form. Speed sensors frequency to 4-20 ma. Frequency to current converter is an ideal device for transmission of speed signals generated by devices like proximity switches. The pulses received...
How many Transmitter Device product listings are available in Pune?
In Pune, there are currently 75 Transmitter Device products listed, offering a wide options available for purchase.
Where can I find a Transmitter Device near Pune?
You can find Transmitter Devices around Pune, such as Bhosari, Shivane, Kondhwa. You can also use ExportersIndia to search for Transmitter Device suppliers in Pune.
What are some related categories to the Transmitter Device in Pune?
Some related categories to Transmitter Device in Pune include Field Mounted Transmitter, Gas Transmitter.
How many Pune-based Transmitter Device manufacturers are there?
There are many Transmitter Device manufacturers in Pune. You can explore ExportersIndia to find them and use filters to your search as per your specific requirements.
How many trusted sellers are available for Transmitter Device in Pune?
Trusted sellers for Transmitter Device in Pune include:
Max. measuring error : ± 0.5 % FSR , available for measuring spans > 1 bar ± 1 % FSR Including zero-point and span error, nonlinearity (by terminal base line), hysteresis and non-repeatability (EN 61298-2)
Min. measuring span : 1.0 bar
Temperature coefficient : ≤ 0.08 % FSR/10 K , measuring span ≤ 0.08 % FSR/10 K , zero point
Max. measuring span : 400 bar
Measuring range : -1 … 400 bar
Standard error of measurement (BFSL) : ± 0.3 % FSR , available for measuring spans > 1 bar ± 0.4 % FSR Including non-linearity, hysteresis and non-repeatability according BFSL
Without transmitter : 1 x Pt100, 4-wire,
1 x Pt100, 4-wire,
2 x Pt100, 2-wire
Degree of protection (EN 60529) : IP 67
IP 69K , with appropriate cable
Explosion protection : ATEX II 1G Ex ia IIC T4/T5,
ATEX II 3G Ex nA IIC T4/T5,
Ex ia Simple apparatus, gas and dust
EMC : EN 61000-6-2,
EN 61000-6-3,
EN 61326-1
Thermal response time, T50 : < 1.5 s , Ø4 mm,
< 6.1 s , Ø6 mm,
≤ < 7.6 s , Ø8 mm
Vibration (sinusoidal) (EN 60068-2-6) : 1.6 mm p-p (2 … 25 Hz), 4 g (25 … 100 Hz), 1 octave / min.
Process pressure : Refer to section "Operating conditions"
Sensor length : 20 … 3000 mm
Pt100 accuracy class (EN 60751) : B (± 0.3 °C at 0 °C),
± (0.3 + 0.005 × t)°C,
A (± 0.15 °C at 0 °C),
± (0.15 + 0.002 × t)°C,
1/3 B (± 0.1 °C at 0 °C),
± 1/3 × (0.3 + 0.005 × t)°C,
1/6 B (± 0.05 °C at 0 °C),
± 1/6 × (0.3 + 0.005 × t)°C
• Measuring ranges from 01+100 Pa to -1000/+2000 mbar (according to model, see "Configuration") • 0-10 V or 4-20 mA output, active sensor, power supply 24 Vac/Vdc (3- 4wires) or 4-20 mA output, passive loop, power supply...
We are a top-notch supplier of a temperature transmitter that is used for monitoring humidity and temperature levels. Known for its accurate readings and long service life our temperature transmitter is available at industry leading prices....
The Humidity sensor reacts very quickly on humidity leaps and measures accurately and free of any hysteresis. These characteristics suits especially good for a precise and quick control of the room climate. These are compact Transmitters for...
Pressure transmitters translate low-level electrical outputs from pressure sensing devices to higher-level signals that are suitable for transmission and processing. They use many different sensing technologies and can measure the pressure of...
Specifications:- Input :- Pt-100RTD, 2 or 3 wire. Thermocouple. Output :- 2 wire 4 to 20 mA corresponding to defined input temperature range. Operating Voltage :- Normally 24VDC, can range from 12V to 36V. Basic accuracy :- 0.5% of FSD Change of...
ITLPro Solutions offers variety of Sensors and Transducers i.e. Signal conditioners converting almost any sensor signals to Analog: 0-10V, 4-20mA, pulsed signals etc., Digital: Wired - RS232, RS485, Modbus, CAN, USB, Ethernet, Profibus, Field bus...
• Adsorption dryers of compressed air, medical compressed air and nitrogen gas • Measures dewpoints in the range -60 0 to +30 0 C td , -80 0 to + 15 0 C td A • Auto self-adjustment • Optional display with operation menu • P2A Software...
• For monitoring climate in building technology, BMS, AHU's and climatic chambers • Accuracy: ± 2.5% rH • Simple adjustment concept for adjustments on site • Connection to P2A Software for parameterization, analysis and adjustment...
FEATURES Developed for use in general industry and OEM applications, where versatility and economy are requirements Compact stainless steel construction with ceramic sensor Available ranges include in/Hg up to 5, 000 psi Wide range...
Ultrasonic Level Indicating Transmitter 2-Wire - MS LL 18 INTRODUCTION 2-Wire display system with Ultrasonic Level Transmitter is developed by MicroSet with advantages of a variety of similar products, using the latest energy-saving components,...
Bringing you top quality Temperature Transmitters that are manufactured to precision using high grade material under our team of qualified engineers. Products manufactured by us are known for their durability and long life. Our products are always...
Presenting Pressure Transmitters which are of the best quality for plant-use. The Pressure Transmitters manufactured by us are made from best grade raw material and manufactured to prevision under our team of qualified engineers. These are made for...
Flow transmitters are calibrated to read in gallons and liters per minute with two totals in which case one is resettable and gives you a cumulative flow total....