GST : 36GNLPS1299P1ZS
4.5/5
Our Products
SANDHYAFLEX Supplier of LDPE Sheet Thickness 75 Microns to 1500 Microns
A PVC water stopper, often referred to as a PVC water bar or PVC water stop, is a construction material used to prevent the passage of water through joints or expansion/contraction points in concrete structures. These water stoppers are typically made of polyvinyl chloride (PVC) or a similar plastic material, and they are designed to be embedded in concrete during construction to create a watertight seal. Here are some key points about PVC water stoppers:
1. **Purpose**: The primary purpose of a PVC water stopper is to prevent the ingress or egress of water through concrete joints, such as expansion joints, construction joints, and around penetrations like pipes and conduits. They help maintain the structural integrity of the concrete and prevent water leakage, which can cause damage and corrosion.
2. **Types**: There are different types of PVC water stoppers designed to suit specific applications and conditions. Common types include:
- **Bulb Type**: These have a bulbous shape and are used in expansion joints or where high movement is expected.
- **Ribbed Type**: Ribbed water stoppers have a ribbed surface to improve bonding with concrete.
- **Dumbbell Type**: Dumbbell-shaped water stoppers are often used in construction joints.
- **Center Bulb Type**: These have a central bulb and are used in areas with limited movement.
3. **Installation**: PVC water stoppers are typically installed by embedding them into the fresh concrete at the desired location. They are placed so that they create a continuous barrier against water penetration when the concrete cures and hardens. Proper installation is essential to ensure an effective water seal.
4. **Advantages**:
- PVC water stoppers are resistant to water and chemicals, making them suitable for a wide range of applications, including in sewage treatment plants, dams, reservoirs, and basements.
- They are flexible, allowing them to accommodate movement and settlement in the concrete without losing their sealing properties.
- PVC water stoppers are durable and have a long service life.
5. **Maintenance**: Once installed correctly, PVC water stoppers require minimal maintenance. Regular inspections may be necessary to ensure that they remain in good condition and are effectively sealing the joints.
6. **Compatibility**: PVC water stoppers are compatible with concrete and do not corrode or react with it. They are also compatible with a variety of construction materials, making them versatile for use in different projects.
7. **Environmental Considerations**: PVC is a plastic material, and its use has raised environmental concerns due to issues associated with its production and disposal. Efforts have been made to develop more environmentally friendly alternatives in some cases.
PVC water stoppers are crucial components in many construction projects, especially in situations where waterproofing is essential. Proper selection and installation of the appropriate type of PVC water stopper can help ensure the integrity and longevity of concrete structures while preventing water infiltration.
Additional Information:
Payment Terms : T/T
Water stoppers (also known as waterstops) are critical components used in construction to prevent the passage of water through concrete joints, especially in water-retaining or water-excluding structures like basements, tunnels, dams, reservoirs, water tanks, and retaining walls. Here are the main advantages of water stoppers:
rnrn 1. Prevents Water LeakagernWater stoppers seal construction joints, expansion joints, and movement joints, preventing water from passing through. This is vital for:
rnUnderground structures
rnWater tanks and reservoirs
rnSewage treatment plants
rnBy keeping water out, water stoppers help protect the steel reinforcement (rebar) from corrosion, thus increasing the durability and life of the structure.
rnrn Protects the EnvironmentrnIn structures like sewage treatment plants, water stoppers prevent contaminated water from leaking into the surrounding soil and groundwater.
rnrn Easy InstallationrnMany modern water stoppers (like PVC, rubber, or bentonite types) are designed for easy installation during construction. They are embedded in the concrete joints during pouring.
rnrn Allows Controlled MovementrnCertain types of waterstops (especially those used in expansion joints) allow for controlled movement due to temperature changes, seismic activity, or settling, without compromising water tightness.
rnrn Cost-Effective in the Long RunrnThough they add to initial construction cost, water stoppers reduce maintenance costs and potential damage from water leakage, making them economically beneficial over time.
rnrn Versatile Types for Various ApplicationsrnDifferent materials are available (PVC, rubber, HDPE, metal, swellable bentonite, etc.), allowing engineers to choose the best fit for:
rnFreshwater vs. chemical exposure
rnInternal vs. external joints
rnStatic vs. dynamic structures
rnWould you like a comparison between types of water stoppers or guidance on which is best for a specific project?vvvv
Additional Information:
Payment Terms : D/A
Packaging Details : Sure! Heres a general overview of **packaging details** typically used for **water stoppers (like PVC, rubber, or bentonite types)** in construction:
---
### **Standard Packaging Details for Water Stoppers**
**Packaging Element** **Details**
-----------------------------------------------------------------------------------------
**Product Form** Coiled rolls (for strip-type water stoppers)
**Material Types** PVC, Rubber, HDPE, Bentonite, Metal
**Roll Length** Usually **15 to 30 meters** per roll
**Width** Common widths: **150mm, 200mm, 250mm, 300mm**
**Thickness** Varies from **5mm to 10mm**
**Roll Weight** Depends on dimensions, typically **2550 kg per roll**
**Packaging Type** - Plastic/Polyethylene wrapping- HDPE/LDPE sheeting- Wooden pallets (for bulk export)- Corrugated boxes (sometimes)
**Labeling** - Product name- Size- Batch number- Manufacturing date- Handling instructions
**Palletization (Export)** Usually palletized and shrink-wrapped for container loading
**Container Load (Export)** 2024 tons in a 20' container, depending on size and weight
---
### **Optional Inclusions**
- Technical data sheet
- MSDS (Material Safety Data Sheet)
- Installation guide/manual
---
Would you like packaging specs for a **specific brand**, **material type** (PVC/rubber), or for **domestic vs. export**? I can tailor the details further.
Delivery Time : 7to 15days
low density polyethylene sheethas many names. It goes by the namespoly sheeting, plastic sheeting, plastic film, polyethylene sheet, andpoly filmto name a few. polyethylene sheeting is a plastic film made from petroleum. That is why the price of the product can vary depending on what oil prices are doing. It is sold in rolls where in additives can be added to change the functionality of the film. additive such as u.v. Inhibitors, fire retardants, anti-static additives are added so each variation can best serve its intended use. ldpe plastic sheet, ldpe sheets mono industries were established in the year 2016 at Hyderabad, india. We are an iso 9001:2015 certified company and a reckoned name in the field of supplying a vast collection of ldpe sheet. We are specialized in offering an expansive range of ldpe plastic sheet to high standards. Our specialization is in supply hdpe sheet of 30 micron to 1000 microns and width of 1 meter to 6 meter. Our production procedures conform to is-2508/1984. Few application areas of our products are: LDPE (Low-Density Polyethylene) sheet is a versatile plastic material commonly used in various industries for its excellent flexibility, durability, and chemical resistance. LDPE is a thermoplastic polymer that is known for its low density, making it lightweight and easy to work with. Here are some key features and uses of LDPE sheets: 1. Material properties: LDPE sheets have excellent flexibility, allowing them to conform to irregular surfaces and withstand bending and stretching without cracking. They also exhibit good impact resistance, making them suitable for applications where impact or shock absorption is required. LDPE sheets are resistant to many chemicals, moisture, and UV radiation. 2. Versatility: LDPE sheets have a wide range of applications across different industries. They are commonly used for packaging materials, including bags, films, and wraps, due to their moisture resistance and sealing properties. LDPE sheets are also used in construction for vapor barriers, protective covers, and liners. Additionally, they are employed in agriculture for greenhouse films, pond liners, and irrigation systems. 3. Electrical insulation: LDPE sheets have excellent electrical insulation properties, making them suitable for applications in the electrical and electronics industry. They can be used as insulating barriers, gaskets, and components in electrical equipment. 4. Impact protection: The flexibility and shock-absorbing properties of LDPE sheets make them useful for impact protection applications. They can be employed as protective padding, bumpers, or liners to prevent damage to surfaces, equipment, or products. 5. Easy fabrication: LDPE sheets can be easily cut, formed, and welded using common fabrication techniques. They can be machined, drilled, or thermoformed to meet specific requirements. 6. Water and chemical resistance: LDPE sheets are highly resistant to water, moisture, and many chemicals. This makes them suitable for applications that involve exposure to liquids, such as chemical storage containers, water tanks, or lining for chemical processing equipment. 7. Food contact compliance: LDPE is commonly used for food packaging applications due to its low reactivity and compliance with food safety regulations. LDPE sheets that are designated as food-grade are safe for direct contact with food. It's important to note that LDPE has a lower temperature resistance compared to some other plastics. It begins to soften and deform at higher temperatures, limiting its suitability for applications involving high heat or prolonged exposure to sunlight. When considering LDPE sheets for a specific application, it is recommended to consult with suppliers or manufacturers who can provide guidance on material specifications, thickness options, and any additional requirements or certifications needed for your specific use case. LDPE (Low-Density Polyethylene) sheet is a
Additional Information:
Payment Terms : T/T
Packaging Details : Packing in Roll
Delivery Time : 7 to 15days
Selection of appropriate PVC water stopper Ribbed Type It has a multi-purpose water stopper design to be used for the expected differential settlement of poured concrete and a firm concrete grip desired. Dumbbell Type With greater variation in temperature, expansion and contraction of joints happen. Dumbbell type water stoppers are the suggested ones for these cases. Kicker (Surface Type) Where the embedded types cannot be used owing to interference of steel reinforcement, these are placed externally. Installation procedure: During installation, using small wires, the water stoppers are tied to the steel framework through the eyelets. Also, certain metal clamps are used to grip the water stop seal and keep it in proper position. Initially, half of the water stopper is places in the concrete. It leaves the other half extended. Then, the other half is embedded that leaves the centre bulb free for expansion and contraction movements. Applications Of PVC Water Stoppers Public Utilities:For bridges, road embankments, tunnels, water tanks, water filtration systems, swimming pools, sewage plants, clarifiers, dams, canals, reservoirs, aqueducts and irrigation projects cooling towers. Buildings:For basements, foundations slabs, masonry joints, retaining walls, terraces, overhead & underground water tanks and Industries:For fertilizer steel, chemical plants, waste treatment plants, atomic reactors, thermal & hydro power stations and shipyard & docks. Precautions to take while water stopper installation They are vulnerable to damage during the construction process The concrete compaction around the water stopper should be taken care of. If not, it can dislocate and lead to a risk of honeycomb formation. This might result in leakage through concrete instead of the joint. Methods for joining PVC water stoppers with heater blade Water stoppers can be joined on the site using a simple electrical heater blade. Water bars having the same width and design should be sharply levelled with a knife at the Turn on the Electric Heater Blade. Wait till it becomes hot Place the water stopper on both sides of heater blade. Press it until it melts but without burning Remove the heater blade upward Join the molten ends quickly. Hold them together firmly for approximately 20 to 30 seconds. PVC Water Stopper with Center Bulb 150 (6") x4mm 150 (6") x5mm 150 (6") x6mm. 150 (6" ) x8mm 150 6") x10mm 200 (8" x 8mm 200 )8") x10mm 240 x 8mm 240x10mm. 250 (10") x8mm 250 (10") x10mm 250(10" x12mm 300 (12") x6mm 300 (12") 8mm 300 (12") 10mm 300 (12" ) 12mm 300(12") 15mm A PVC water stopper is a device used in construction to prevent water from penetrating through joints or gaps in concrete structures, such as basements, swimming pools, water tanks, and underground structures. It is commonly used to provide a watertight seal and protect the structure from water damage. PVC water stoppers are typically made from high-quality polyvinyl chloride (PVC) material, which is durable, flexible, and resistant to water and chemicals. They come in various shapes and sizes to accommodate different types of joints and applications. The most common shapes include "dumbbell" or "center bulb" profiles, which provide effective sealing against water ingress. Installation of PVC water stoppers involves embedding them in the concrete joints before pouring the concrete. The water stopper is placed in the joint, and concrete is poured around it, ensuring a tight seal. The flexibility of the PVC allows it to accommodate slight movements or vibrations without compromising the water seal. PVC water stoppers are preferred over traditional alternatives like rubber or metal due to their excellent chemical resistance, cost-effectiveness, ease of installation, and long-term durability. They are also available in different grades to meet specific project requirements, such as resistance to hydrostatic pressure or chemical
Additional Information:
Payment Terms : T/T
Packaging Details : Selection of appropriate PVC water stopper
Ribbed Type It has a multi-purpose water stopper design to be used for the expected differential settlement of poured concrete and a firm concrete grip desired. Dumbbell Type With greater variation in temperature, expansion and contraction of joints happen. Dumbbell type water stoppers are the suggested ones for these cases. Kicker (Surface Type) Where the embedded types cannot be used owing to interference of steel reinforcement, these are placed externally.
Installation procedure:
During installation, using small wires, the water stoppers are tied to the steel framework through the eyelets. Also, certain metal clamps are used to grip the water stop seal and keep it in proper position. Initially, half of the water stopper is places in the concrete. It leaves the other half extended. Then, the other half is embedded that leaves the centre bulb free for expansion and contraction movements.
Applications Of PVC Water Stoppers
Public Utilities: For bridges, road embankments, tunnels, water tanks, water filtration systems, swimming pools, sewage plants, clarifiers, dams, canals, reservoirs, aqueducts and irrigation projects cooling towers. Buildings: For basements, foundations slabs, masonry joints, retaining walls, terraces, overhead & underground water tanks and Industries: For fertilizer steel, chemical plants, waste treatment plants, atomic reactors, thermal & hydro power stations and shipyard & docks.
Precautions to take while water stopper installation
They are vulnerable to damage during the construction process The concrete compaction around the water stopper should be taken care of. If not, it can dislocate and lead to a risk of honeycomb formation. This might result in leakage through concrete instead of the joint.
Methods for joining PVC water stoppers with heater blade
Water stoppers can be joined on the site using a simple electrical heater blade. Water bars having the same width and design should be sharply levelled with a knife at the Turn on the Electric Heater Blade. Wait till it becomes hot Place the water stopper on both sides of heater blade. Press it until it melts but without burning Remove the heater blade upward Join the molten ends quickly. Hold them together firmly for approximately 20 to 30 seconds.
PVC Water Stopper with Center Bulb
150 (6") x4mm 150 (6") x5mm 150 (6") x6mm. 150 (6" ) x8mm 150 6") x10mm 200 (8" x 8mm 200 )8") x10mm 240 x 8mm 240x10mm. 250 (10") x8mm 250 (10") x10mm 250(10" x12mm 300 (12") x6mm 300 (12") 8mm 300 (12") 10mm 300 (12" ) 12mm 300(12") 15mm
Delivery Time : 3 to 5 days
Ms. Sandhya Chaudhary (Sandhya Enterprises)
5-24-1223/5/1, Ambedkar Nagar, Gajularamaram, Quatubulapur, R. R. Dist, Hyderabad, Telangana - 500055, India
https://www.sandhyaflex.co.in
Share us via
