GST : 36GNLPS1299P1ZS
4.5/5
Our Products
Sandhya Enterprises Manufacturer and Supplierof Bridge Bearing Pad as per MoRTH, IRC 83 (Part II) 1987 and UIC 772 2R. Thickness 25mm to 144mm SANDHYA ENTERPRISES Plot No 5-24-1223/5/1, Ambedkar Nagar, Gajuramaram, R.R. Dist.500055, Hyderabad,Telangana State. India Profile We are pleased to introduce ourselves as Rubber Sheet, Textile Braided More..
we are pleased to introduce ourselves as rubber sheet, textile braided hose, rubber suction hose, elastomeric bridge bearing, rubber moulded products, extruded products and pvc water stop, bridge expansion joint. We have leading and reputed consumer as our valued customers. It will be our pleasure if we can be of any service to your good selves and welcome your inquiries for your requirements.
our service is well established with the, cement industries, granites industries, electric power industries, ready mix industries, construction company and civil construction works. We go through the test certificate, physical properties, processing condition of the finished goods, grades etc and after looking at the final product we confidently recommended our valued customer to buy the product.
ultimate compression strength 60mpa adhesion strength (stripping test) at 4mpa vl and 3mpa hl shear modulus test 5mpa vl and hl load 2h
technical details sr no. Test unit specification and testing method specimens 1 hardness irhd is: 3400 (part ii) cl.5.1.2.2 4.0mm (min ) thickness of test specimen 2 tensile strength mpa is:3400 ( part i) table 1 type -1 thick- 2.0 +.0.20mm width 6.0 + 0.40mm bench mark-25.0mm (max) 3 elongation at break % 4 adhesion strength (metal to rubber kn/m is:3400 ( part xiv) cl.3.3 length -125mm width-25mm 5 ash content % is:3400 (part xxii) cl. A-8.3.1 is 1 g (min) 6 polymer identification chemically 0.5 g (min) 7 percentage of polymers % 1 g (min) 8 compression set % is: 3400 (part x) cl. 5.1 thick -12.5 + 0.50mm dia-29 + 0.50mm 9 elastic modulus mpa irc 83 (part ii) 1987, uic 772 -2r and morth 2 nos from finish product 10 shear modulus mpa 11 ultimate compression strength mpa one specimen size of 100x200mm (cutting piece from
Additional Information:
Payment Terms : T/T
Packaging Details : Packing with HDPE Cover
Delivery Time : 7 to 15days
sandhya enterprises is a manufacturer and supplierof bridge bearing pad as per morth, irc 83 (part ii) 1987 and uic 772 2r. thickness 25mm to 144mm we are pleased to introduce ourselves as rubber sheet, textile braided hose, rubber suction hose, elastomeric bridge bearing, rubber moulded products, extruded products and pvc water stop, bridge expansion joint. We have leading and reputed consumer as our valued customers. It will be our pleasure if we can be of any service to your good selves and welcome your inquiries for your requirements. our service is well established with the, cement industries, granites industries, electric power industries, ready mix industries, construction company and civil construction works. We go through the test certificate, physical properties, processing condition of the finished goods, grades etc and after looking at the final product we confidently recommended our valued customer to buy the product. ultimate compression strength 60mpa adhesion strength (stripping test) at 4mpa vl and 3mpa hl shear modulus test 5mpa vl and hl load 2h technical details sr no. Test unit specification and testing method specimens 1 hardness irhd is: 3400 (part ii) cl.5.1.2.2 4.0mm (min ) thickness of test specimen 2 tensile strength mpa is:3400 ( part i) table 1 type -1 thick- 2.0 +.0.20mm width 6.0 + 0.40mm bench mark-25.0mm (max) 3 elongation at break % 4 adhesion strength (metal to rubber kn/m is:3400 ( part xiv) cl.3.3 length -125mm width-25mm 5 ash content % is:3400 (part xxii) cl. A-8.3.1 is 1 g (min) 6 polymer identification chemically 0.5 g (min) 7 percentage of polymers % 1 g (min) 8 compression set % is: 3400 (part x) cl. 5.1 thick -12.5 + 0.50mm dia-29 + 0.50mm 9 elastic modulus mpa irc 83 (part ii) 1987, uic 772 -2r and morth 2 nos from finish product 10 shear modulus mpa 11 ultimate compression strength mpa one specimen size of 100x200mm (cutting piece from An elastomeric bridge bearing, also known as a rubber bridge bearing, is a structural component used to support and accommodate movement in bridge structures. It is designed to transfer loads from the superstructure (the bridge deck and its components) to the substructure (piers, abutments, or supports) while allowing for various types of movement, such as rotation, translation, and rotation in multiple axes. Elastomeric bridge bearings are typically made of layers of elastomeric material, such as natural rubber or synthetic rubber compounds. The rubber layers are often reinforced with steel plates or fabric inserts to provide additional strength and stability. The combination of rubber and reinforcement allows the bearing to withstand the applied loads and movements while providing flexibility and resilience. The main functions of elastomeric bridge bearings are: 1. Load transfer: Elastomeric bearings distribute the weight and loads from the bridge superstructure to the substructure, reducing the stress on the bridge components and foundations. 2. Movement accommodation: They accommodate various types of bridge movements, including expansion and contraction due to temperature changes, horizontal and vertical displacements caused by live loads or settlement, and rotational movements due to bridge deck rotations or seismic events. 3. Vibration and shock absorption: Elastomeric materials have inherent damping properties, which help absorb and dissipate vibrations and shocks, improving the overall structural performance and comfort of the bridge. 4. Noise reduction: The rubber material helps to dampen and reduce noise generated by traffic or other sources, resulting in quieter bridge operations. Elastomeric bridge bearings are available in different types and designs, depending on the specific application and load requirements. Common types include pot bearings, spherical bearings, and strip bearings, each with their own characteristics and advantages. Proper installation and maintenance of elastomeric bridge bearings are crucial for
Additional Information:
Payment Terms : T/T
Packaging Details : Packing with HDPE cover
Delivery Time : 7 to 15days
Sandhya enterprises manufacturer and suppliers elastomeric rubber pad. 2mm to 144mm thickness.as per irc 83 (part ii) 1987 specification
Additional Information:
Payment Terms : T/T
Packaging Details : Packing with HDPE Cover
Delivery Time : 7 to 15days
We are manufacturing of Elastomeric Pad as per IRC 83 (Part II) 1987. We have 20 years experience in Rubber Industries. We have experience Manufacturing, Testing and Installation.
Additional Information:
Packaging Details : Packing in HDPE Cover
Sandhya enterprises manufacturer and supplier of strip seal expansion joint for railway and road bridge. Strip seal expansion joint as per morth specification. Rubber strip as per irc 83 (part ii) 1987 specification.An elastomeric bridge bearing is a specialized component used in bridge construction and infrastructure projects. It is designed to provide support, flexibility, and load transfer between the bridge superstructure and substructure while accommodating movements caused by thermal expansion, contraction, and other factors. The packing details of elastomeric bridge bearings may vary depending on the manufacturer and supplier. However, here are some general considerations:
rnrn1. Quantity: The packaging should indicate the number of elastomeric bridge bearings included in a single pack. It can range from one bearing to multiple bearings, depending on the packaging configuration and supplier\'s specifications.
rnrn2. Size and Dimensions: The packaging may specify the size and dimensions of the elastomeric bridge bearing. This information helps determine if the bearing is suitable for the intended application and the bridge design requirements.
rnrn3. Material: The packaging may mention the specific elastomeric material used for the bearing construction. Elastomeric bridge bearings are typically made from high-quality synthetic rubber compounds that offer excellent durability, resilience, and load-bearing capacity.
rnrn4. Design and Load Capacity: The packaging may provide information about the design type and load capacity of the elastomeric bridge bearing. This includes details such as the maximum vertical load, horizontal load, rotational capacity, and allowable displacements.
rnrn5. Surface Treatment: The packaging may indicate if the elastomeric bridge bearings have any specific surface treatment, such as an anti-slip or corrosion-resistant coating. These treatments can enhance the performance and longevity of the bearings.
rnrn6. Packaging Material: The packaging itself may be mentioned, indicating the type of material used, such as cardboard boxes or crates. The packaging should provide sufficient protection to prevent damage during transportation and storage.
rnrn7. Installation Instructions: The packaging may include installation instructions or guidelines, describing the proper installation methods and techniques for the elastomeric bridge bearings.
rnrn8. Quality Certifications: The packaging may mention any applicable quality certifications or standards that the elastomeric bridge bearings comply with, such as ISO or ASTM standards.
rnrnIt\'s important to note that the specific details and packaging may vary between manufacturers and suppliers. Therefore, it is always recommended to refer to the packaging or contact the manufacturer or supplier directly for accurate and up-to-date information regarding the packing details of a particular elastomeric bridge bearing.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Packing with HDPE Cover
The packing details of elastomeric bridge bearings can vary depending on the manufacturer, supplier, and specific product. However, here are some general packing details that you may commonly find:
1. Quantity: The packaging should indicate the number of elastomeric bridge bearings included in a single pack. It can range from one bearing to multiple bearings, depending on the packaging configuration and the supplier's specifications.
2. Size and Dimensions: The packaging may specify the size and dimensions of the elastomeric bridge bearings. This information helps determine if the bearing is suitable for the intended application and the bridge design requirements. The size typically includes the length, width, and height of the bearing.
3. Material: The packaging may mention the specific elastomeric material used for the bearing construction. Elastomeric bridge bearings are typically made from high-quality synthetic rubber compounds that offer excellent durability, resilience, and load-bearing capacity.
4. Design and Load Capacity: The packaging may provide information about the design type and load capacity of the elastomeric bridge bearings. This includes details such as the maximum vertical load, horizontal load, rotational capacity, and allowable displacements.
5. Surface Treatment: The packaging may indicate if the elastomeric bridge bearings have any specific surface treatment, such as an anti-slip or corrosion-resistant coating. These treatments can enhance the performance and longevity of the bearings.
6. Packaging Material: The packaging itself may be mentioned, indicating the type of material used, such as cardboard boxes or crates. The packaging should provide sufficient protection to prevent damage during transportation and storage.
7. Installation Instructions: The packaging may include installation instructions or guidelines, describing the proper installation methods and techniques for the elastomeric bridge bearings.
8. Quality Certifications: The packaging may mention any applicable quality certifications or standards that the elastomeric bridge bearings comply with, such as ISO or ASTM standards.
It's important to note that the specific details and packaging may vary between manufacturers and suppliers. Therefore, it is always recommended to refer to the packaging or contact the manufacturer or supplier directly for accurate and up-to-date information regarding the packing details of a particular elastomeric bridge bearing.
Delivery Time : 7 to 10days
Ms. Sandhya Chaudhary (Sandhya Enterprises)
5-24-1223/5/1, Ambedkar Nagar, Gajularamaram, Quatubulapur, R. R. Dist, Hyderabad, Telangana - 500055, India
https://www.sandhyaflex.co.in
Share us via
