Application: Fly Ash Rubber Hose, tank, truck, Bulker loading / unloading or in-plant transfer of dry bulk cement, sand, lime, slurry etc., suction or discharge of abrasive materials. Construction: Lining :Uniform seamless tube of natural and synthetic blend rubber compound with excellent resistance to abrasion. Reinforcement :Reinforcement of rubber impregnated woven textile applied on bias at approx.45 degree angle combination with galvanized steel wire Cover :Corrugated/plain cloth marked outer cover made from natural rubber compound with excellent weather and abrasion resistant. End Connections :Each Hose Length has soft ends for clamping or can be supplied with different type of nipples, flanges or fittings as per requirement. Cover: W.P. of 1.0 Mpa & Min. B.P. of 3.0Mpa. W.P. of 1.5 Mpa & Min. B.P. of 4.5Mpa . As Per IS: 13071-1991 Specification A bulker unloading rubber hose, also known as a bulk discharge hose or bulk material handling hose, is a specialized type of hose designed for transferring bulk solids or granular materials, such as dry cement, sand, grains, or powders, from a storage container or bulk carrier to a receiving system or storage facility. These hoses are commonly used in industries such as construction, mining, agriculture, and manufacturing. Here are some key details and features related to bulker unloading rubber hoses: 1. Material: Bulker unloading rubber hoses are typically made from abrasion-resistant rubber compounds that can withstand the abrasive nature of the bulk materials being transferred. The rubber material used is often reinforced with fabric or wire helix for added strength and flexibility. 2. Structure: These hoses are constructed with an inner tube, reinforcement layers, and an outer cover. The inner tube is designed to handle the specific material being transferred and is resistant to abrasion, static electricity buildup, and potential contamination. Reinforcement layers provide structural integrity and prevent the hose from collapsing under vacuum or high-pressure conditions. The outer cover protects the hose from external damage, weathering, and environmental factors. 3. Size and Diameter: Bulker unloading rubber hoses are available in various sizes and diameters to accommodate different flow rates and handling capacities. The sizes typically range from a few inches to several inches in diameter. 4. Flexibility: These hoses are designed to be flexible to facilitate easy handling and maneuverability during the unloading process. The flexibility allows the hose to bend and adapt to the movement of the bulk material being discharged. 5. End Connections: Bulker unloading rubber hoses come with specific end connections that enable them to connect to the bulk material storage container or carrier on one end and the receiving system or storage facility on the other end. These connections can include flanges, couplings, or other customized fittings to ensure secure and leak-free connections. 6. Features: Depending on the specific application and requirements, bulker unloading rubber hoses may include additional features like anti-static properties to dissipate static electricity, high-pressure ratings, or FDA-approved materials for handling food-grade materials. 7. Standards and Certifications: Depending on the industry and application, these hoses may need to comply with certain standards and certifications. Common standards include those related to pressure ratings, abrasion resistance, electrostatic discharge, or food-grade requirements. When purchasing a bulker unloading rubber hose, it's important to consider factors such as the type of bulk material being transferred, the required handling capacity, pressure and temperature limits, compatibility with end connections or equipment, and any necessary certifications or standards. Consulting with a trusted supplier or manufacturer specializing in bulk material handling hoses can help ensure you select the right h

SAE 100R6 is a specification for a type of rubber hose used in hydraulic systems. The SAE (Society of Automotive Engineers) sets standards for various hydraulic hoses and fittings to ensure compatibility and safety in hydraulic applications. SAE 100R6 specifies the requirements for a low-pressure, textile-reinforced rubber hose.

Here are some key characteristics and features of SAE 100R6 rubber hoses:

1. **Low Pressure:** SAE 100R6 hoses are designed for low-pressure hydraulic systems typically operating at pressures up to 300 psi (20 bar).

2. **Textile Reinforcement:** These hoses are reinforced with one or multiple layers of textile materials, such as braided or spiral-wound textile, to provide strength and flexibility.

3. **Rubber Material:** The hose is made from a synthetic rubber compound, which provides resistance to oil, abrasion, and other common hydraulic fluids.

4. **Application:** SAE 100R6 hoses are commonly used in a variety of low-pressure hydraulic applications, including hydraulic oil lines, fuel oil lines, and other general-purpose fluid transfer applications.

5. **Temperature Range:** They are typically designed to operate within a temperature range of -40C to +100C (-40F to +212F), although specific hoses may have slightly different temperature ratings.

6. **Compatibility:** These hoses are suitable for use with petroleum-based hydraulic fluids and certain water-based hydraulic fluids.

When using SAE 100R6 hoses, it's essential to follow the manufacturer's recommendations and ensure that the hose is properly installed and maintained. Additionally, the fittings and connectors used with these hoses should also be compatible with the SAE 100R6 standard to maintain system integrity and safety.

A dewatering rubber hose is a specialized type of rubber hose designed for the removal of water or other liquids from a specific area or location. These hoses are commonly used in various industrial, construction, and agricultural applications where water needs to be pumped or drained, and a flexible and durable hose is required. Here are some key features and considerations related to dewatering rubber hoses:

1. Material: Dewatering rubber hoses are typically made from high-quality rubber compounds that offer flexibility, durability, and resistance to abrasion and weathering. The choice of rubber material may depend on the specific application and the type of liquid being pumped.

2. Construction: These hoses are typically reinforced with layers of fabric or synthetic materials to provide strength and prevent collapse under suction or pressure.

3. Diameter and Length: Dewatering hoses come in various diameters and lengths to accommodate different flow rates and reach required locations. The selection depends on the specific dewatering needs of the application.

4. Couplings and Fittings: They are often equipped with couplings or fittings at the ends to connect to pumps, discharge outlets, or other equipment. These fittings should be compatible with the equipment being used.

5. Flexibility: Dewatering rubber hoses need to be flexible to allow easy positioning and maneuverability during use. This flexibility also helps prevent kinking or twisting.

6. Pressure Rating: The hoses should have an appropriate pressure rating to handle the expected pressure generated by the pump or other equipment.

7. Temperature Resistance: Depending on the application, dewatering hoses may need to resist high or low temperatures. Specialized hoses may be available for extreme temperature conditions.

8. Chemical Compatibility: If the pumped liquid contains chemicals or contaminants, it's essential to ensure that the hose material is compatible with the fluid to prevent degradation or chemical reactions.

9. UV Resistance: Some dewatering hoses may be exposed to sunlight, so UV resistance can be important for outdoor applications.

Dewatering rubber hoses are commonly used in various industries, including construction (for site drainage and excavation), mining (for water removal from mining sites), agriculture (for irrigation and drainage), and emergency response (for flood control and disaster recovery). Selecting the right dewatering hose for a specific application is crucial to ensure efficient and reliable water removal. It's also important to regularly inspect and maintain these hoses to prevent leaks or other issues that may disrupt the dewatering process.

Hydraulic rubber hoses are high-pressure hoses used in hydraulic systems to transmit fluid power. These hoses are essential components in hydraulic machinery, equipment, and systems across various industries, including construction, agriculture, manufacturing, and transportation. Here are some key features and considerations related to hydraulic rubber hoses:

1. **Materials:** Hydraulic hoses are typically made of rubber or synthetic rubber compounds. These materials provide flexibility, durability, and resistance to abrasion and oil. The choice of rubber material may vary depending on the application and the specific hydraulic fluid used.

2. **Reinforcement:** To withstand high-pressure conditions, hydraulic hoses are reinforced with layers of high-strength materials, such as steel wire, textile, or synthetic fibers. The reinforcement provides structural integrity and prevents hose burst or failure under pressure.

3. **Diameter and Length:** Hydraulic hoses come in various diameters and lengths to accommodate different hydraulic systems and applications. The choice of size depends on factors like flow rate and system pressure.

4. **Pressure Rating:** Hydraulic hoses are designed to handle specific pressure ranges, often categorized by their "working pressure" and "burst pressure." The working pressure is the maximum continuous pressure the hose can safely handle, while the burst pressure is the pressure at which the hose may fail.

5. **Temperature Range:** Hydraulic rubber hoses should be selected based on the temperature range of the hydraulic fluid and the environment in which they will operate. Some hoses are designed to withstand extreme temperatures.

6. **Compatibility:** It's crucial to ensure that the hydraulic hose material is compatible with the hydraulic fluid being used. Different hydraulic fluids, such as mineral oil, synthetic oil, or water-based fluids, may require specific hose materials.

7. **Fittings and Connectors:** Hydraulic hoses have fittings or connectors at each end that allow them to connect to hydraulic components like pumps, cylinders, and valves. These fittings should match the hose size and type and provide a secure and leak-free connection.

8. **Flexibility:** Hydraulic hoses need to be flexible to allow for movement and positioning within hydraulic systems. They should not kink or twist during operation.

9. **Abrasion Resistance:** In applications where hoses may come into contact with abrasive materials, hydraulic hoses may be designed with additional protective layers for abrasion resistance.

10. **Standards:** Hydraulic hoses often conform to specific industry standards and certifications, such as SAE (Society of Automotive Engineers) standards or ISO (International Organization for Standardization) standards, to ensure consistency and quality.

Proper selection, installation, and maintenance of hydraulic rubber hoses are critical for the safe and efficient operation of hydraulic systems. Hoses should be inspected regularly for wear, damage, or leaks and replaced as needed to prevent hydraulic system failures and maintain equipment reliability.

An oil suction and discharge rubber hose is a specialized type of rubber hose designed for the safe and efficient transfer of various petroleum-based products, including oils, fuels, and petroleum derivatives. These hoses are commonly used in industrial applications, such as oil refineries, chemical plants, and transportation, to move liquids from one location to another. Here are some key features and considerations related to oil suction and discharge rubber hoses:

**Key Features:**

1. **Material:** Oil suction and discharge hoses are typically made from high-quality synthetic rubber compounds that are resistant to petroleum-based products. These materials offer flexibility, durability, and resistance to abrasion, chemicals, and weathering.

2. **Reinforcement:** To withstand the suction and pressure forces involved in transferring oils and fuels, these hoses are reinforced with multiple layers of high-strength materials, such as textile fabric, steel wire, or synthetic fibers. The reinforcement provides structural integrity and prevents hose collapse or bursting.

3. **Design:** These hoses are designed to handle both suction (drawing in liquids) and discharge (pumping out liquids) operations. They may have a corrugated or smooth inner lining, depending on the application.

4. **Diameter and Length:** Oil suction and discharge hoses come in various diameters and lengths to accommodate different flow rates and reach required locations. The selection depends on the specific application and the volume of liquid to be transferred.

5. **Pressure Rating:** These hoses are rated for specific working pressures, which determine their safe operating limits. The pressure rating depends on the hose's size and construction.

6. **Temperature Range:** Oil suction and discharge hoses should be selected based on the temperature range of the liquids being transferred and the environmental conditions of the application.

7. **Fittings and Connectors:** They typically have fittings or couplings at each end to connect to pumps, tanks, or other equipment. Properly chosen and installed fittings are essential for a secure and leak-free connection.

**Applications:**

Oil suction and discharge rubber hoses are used in a wide range of industrial applications, including:

1. **Oil and Fuel Transfer:** They are commonly used to transfer crude oil, gasoline, diesel fuel, and other petroleum-based products between storage tanks, tankers, and processing facilities.

2. **Chemical and Petrochemical Industries:** These hoses are used in chemical plants and refineries to handle various chemicals and petrochemicals.

3. **Maritime and Offshore Operations:** They are employed in marine vessels for transferring fuel and oil between ship and shore, as well as for offshore drilling operations.

4. **Tank Trucks and Railcars:** Oil suction and discharge hoses are used to load and unload tank trucks and railcars carrying liquid petroleum products.

5. **Construction and Mining:** They find applications in construction equipment and mining operations for handling diesel fuel and hydraulic oils.

Proper handling, maintenance, and inspection of oil suction and discharge rubber hoses are essential to ensure their integrity and safe operation. Hoses should be inspected regularly for signs of wear, damage, or deterioration and replaced as needed to prevent leaks and maintain safety. Compliance with industry standards and regulations is also crucial when selecting and using these hoses in industrial applications.

A slurry rubber hose, also known as a slurry hose or sludge hose, is a specialized type of rubber hose designed for the transportation of abrasive and corrosive materials, particularly in industries such as mining, dredging, construction, and wastewater management. These hoses are built to handle the harsh conditions associated with slurries, which often contain solids, abrasive particles, and corrosive chemicals. Here are some key features and considerations related to slurry rubber hoses:

**Key Features:**

1. **Material:** Slurry rubber hoses are typically constructed using high-quality synthetic rubber compounds, such as natural rubber, neoprene, or other specialized rubber materials. The choice of material depends on the specific application and the types of materials being transported.

2. **Reinforcement:** To withstand the abrasive nature of slurries and maintain their structural integrity, these hoses are reinforced with multiple layers of high-strength materials, such as textile fabric, steel wire, or synthetic fibers.

3. **Abrasion Resistance:** Slurry hoses are designed to resist wear and abrasion caused by the movement of abrasive particles within the slurry.

4. **Corrosion Resistance:** They are resistant to the corrosive effects of chemicals commonly found in slurries, making them suitable for handling various corrosive materials.

5. **Flexibility:** Despite their robust construction, slurry rubber hoses maintain flexibility, allowing them to bend and adapt to the contours of the terrain or equipment.

6. **Size and Length:** Slurry hoses come in various sizes and lengths to accommodate different flow rates, pressure requirements, and equipment configurations.

7. **Pressure Rating:** These hoses are rated for specific working pressures, which depend on the hose size, construction, and intended application.

**Applications:**

Slurry rubber hoses are used in a variety of industries and applications, including:

1. **Mining:** They are commonly used in mining operations to transport abrasive materials, such as ore, coal, and tailings.

2. **Dredging:** Slurry hoses are essential in dredging applications for the removal of sediment, sand, and debris from water bodies.

3. **Construction:** In construction projects, slurry hoses are used for the transportation of concrete slurry, grout, and other construction materials.

4. **Wastewater Management:** Slurry hoses play a critical role in wastewater treatment plants for handling sewage sludge and other waste materials.

5. **Industrial Processes:** They find applications in various industrial processes, such as handling chemicals, slurries, and abrasive materials in manufacturing and chemical industries.

6. **Mineral Processing:** Slurry hoses are used in mineral processing facilities for transporting mineral concentrates and processing by-products.

7. **Oil and Gas:** In the oil and gas industry, slurry hoses may be used in drilling operations to transport drilling mud and cuttings.

Proper selection and maintenance of slurry rubber hoses are crucial for ensuring their longevity and safe operation. These hoses should be inspected regularly for signs of wear, damage, or deterioration and replaced as needed to prevent leaks and maintain safety. Additionally, adherence to industry standards and safety guidelines is essential when using slurry hoses in industrial applications.

An air rubber hose with flange is a type of flexible rubber hose used in various industrial applications to transport compressed air or other gases. The flanges at the ends of the hose provide a means of connecting the hose to other equipment, pipes, or fittings securely. These hoses are designed to withstand the pressure and conditions associated with compressed air systems while ensuring a leak-free connection. Here are some key features and considerations related to air rubber hoses with flanges:

**Key Features:**

1. **Material:** Air rubber hoses with flanges are typically made from high-quality rubber or synthetic rubber compounds that are suitable for conveying compressed air and other gases. The choice of rubber material depends on factors such as the application, temperature range, and chemical compatibility.

2. **Reinforcement:** To handle the pressure and structural stresses of compressed air systems, these hoses are reinforced with layers of high-strength materials, such as textile fabric, steel wire, or synthetic fibers.

3. **Flange Ends:** The hose is equipped with flanged connectors at each end. These flanges are often made of metal, such as carbon steel or stainless steel, and are designed to match industry-standard flange dimensions.

4. **Flange Types:** Different types of flanges, including slip-on flanges, weld-neck flanges, and others, may be used depending on the specific application and connection requirements.

5. **Size and Length:** Air rubber hoses with flanges come in various sizes and lengths to accommodate different flow rates and installation needs.

6. **Pressure Rating:** The hoses are rated for specific working pressures, which depend on the hose size, construction, and intended application.

**Applications:**

Air rubber hoses with flanges find applications in a wide range of industries and settings, including:

1. **Compressed Air Systems:** They are commonly used to connect compressors to air receivers, pneumatic tools, and other components in compressed air systems.

2. **Industrial Manufacturing:** These hoses are used in various industrial processes, such as powering pneumatic machinery and equipment in manufacturing facilities.

3. **Construction:** In construction sites, air rubber hoses with flanges are used to supply compressed air for pneumatic tools, including jackhammers, nail guns, and paint sprayers.

4. **Mining:** Compressed air hoses are used in mining operations for various applications, including powering drilling equipment and ventilating underground spaces.

5. **Shipbuilding:** They are employed in shipyards for supplying compressed air to various shipbuilding and maintenance processes.

6. **Automotive:** In automotive workshops and manufacturing plants, these hoses are used to power pneumatic tools and equipment.

7. **Aerospace:** Compressed air hoses play a role in aerospace manufacturing and maintenance for powering pneumatic systems and equipment.

Proper selection, installation, and maintenance of air rubber hoses with flanges are essential for ensuring their longevity and safe operation in specific applications. Selection should take into account factors such as working pressure, temperature range, and compatibility with the compressed air or gas being conveyed. Regular inspections and replacement of hoses that show signs of wear, damage, or deterioration are necessary to maintain system integrity and prevent leaks during compressed air transfer. Additionally, adherence to industry standards and safety guidelines is crucial when handling compressed air hoses.

Mining rubber hoses are specialized hoses designed for use in mining operations, particularly in the extraction, processing, and transportation of minerals and materials. These hoses are built to withstand the harsh conditions and demanding applications encountered in the mining industry, including exposure to abrasive materials, high-pressure fluid transfer, and extreme temperatures. They play a critical role in various mining processes, ensuring the efficient and safe transfer of materials, including ore, slurry, and chemicals. Here are some key features and uses of mining rubber hoses: **Key Features:** 1. **Material:** Mining rubber hoses are typically made from high-quality synthetic rubber compounds or natural rubber. These materials provide flexibility, durability, and resistance to abrasion, corrosion, and harsh chemicals. 2. **Reinforcement:** To handle the high pressures and structural stresses involved in mining operations, these hoses are reinforced with multiple layers of high-strength materials, such as textile fabric, steel wire, or synthetic fibers. 3. **Inner Lining:** The inner lining of the hose is designed to be smooth to facilitate the efficient flow of materials while minimizing friction and abrasion. 4. **Outer Cover:** The outer cover of mining hoses is robust and designed to protect the hose from external factors, including abrasion, weathering, and environmental conditions. 5. **Size and Diameter:** Mining hoses come in various sizes and diameters to accommodate different flow rates, pressure requirements, and mining applications. 6. **Couplings:** They are equipped with couplings or connectors at both ends, often made of durable materials like aluminum or steel. These couplings allow for secure connections to mining equipment and piping systems. **Types of Mining Rubber Hoses:** Different types of mining rubber hoses are available to meet specific mining industry needs. Some common types include: 1. **Slurry Hoses:** Slurry hoses are designed for transporting abrasive materials, such as ore, sand, and slurry. They are often used in mineral processing plants and for tailings disposal. 2. **Dredge Hoses:** Dredge hoses are used in mining and dredging operations to transport materials from underwater locations to the surface. 3. **Chemical Hoses:** These hoses are resistant to a wide range of chemicals and are used for transferring chemicals and acids within mining facilities. 4. **Water Suction and Discharge Hoses:** Water hoses are employed for various water-related tasks in mining, such as dewatering pits and transporting water to processing facilities. 5. **Air and Gas Hoses:** Air and gas hoses are used for pneumatic tools, ventilation, and other air and gas applications in mining operations. **Applications:** Mining rubber hoses are used in various mining applications, including: 1. **Material Transport:** They transport mined materials, including ores, minerals, coal, and aggregates, from the extraction point to processing facilities or transport vehicles. 2. **Dewatering:** Hoses are used for dewatering operations in underground mines and open-pit mines to remove excess water and maintain safe working conditions. 3. **Slurry Handling:** Slurry hoses transport abrasive and corrosive slurries from mining processes to disposal or treatment sites. 4. **Tailings Management:** Hoses are employed for the safe and efficient disposal of tailings, including the transportation of tailings from processing facilities to tailings ponds. 5. **Chemical Handling:** In chemical processing and refining, mining hoses handle the transfer of various chemicals used in the extraction and refining processes. Proper selection, installation, and maintenance of mining rubber hoses are essential to ensure their longevity and safe operation in the mining industry. They should be chosen based on factors such as material compatibility, pressure rating, temperature range, and applicat

PVC Braided Pipe, also known as PVC Braided Hose, is a type of flexible tubing made from polyvinyl chloride (PVC) material. It is reinforced with a braided layer, typically made of synthetic fibers like polyester or nylon. PVC braided pipes are commonly used in various applications due to their flexibility, durability, and resistance to a wide range of chemicals. Here are some key features and common uses of PVC braided pipes:

**Features:**

1. **Flexibility**: PVC braided pipes are highly flexible, making them easy to handle and install in various applications.

2. **Strength**: The braided reinforcement adds strength and stability to the pipe, preventing kinking or collapsing under pressure.

3. **Durability**: They are known for their durability and resistance to abrasion, impact, and weather conditions.

4. **Chemical Resistance**: PVC is inherently resistant to many chemicals, and this property is retained in PVC braided pipes, making them suitable for transporting a variety of fluids.

5. **Temperature Range**: PVC braided pipes can handle a broad temperature range, which makes them suitable for both hot and cold water applications.

6. **Corrosion Resistance**: PVC is non-corrosive, making it an excellent choice for water and fluid transport where corrosion is a concern.

**Common Uses:**

1. **Water Supply**: PVC braided pipes are often used for domestic and commercial water supply lines, including connecting faucets, showers, and washing machines.

2. **Irrigation**: They are suitable for agricultural irrigation systems due to their durability and resistance to chemicals.

3. **Air Compressors**: PVC braided hoses are used to connect air compressors and tools, providing a flexible and durable air supply.

4. **Chemical Transport**: They are used in chemical industries for transporting various chemicals, acids, and bases.

5. **Pneumatic Systems**: PVC braided pipes are employed in pneumatic systems for the transfer of compressed air.

6. **Car Wash Systems**: Car wash facilities often use PVC braided hoses for water and detergent supply.

7. **Hydraulic Systems**: In some low-pressure hydraulic systems, PVC braided hoses can be used.

8. **Vacuum Systems**: They can be used in vacuum systems for suction and discharge purposes.

9. **Food and Beverage Industry**: Food-grade PVC braided hoses are used for conveying food and beverages.

It's important to note that PVC braided pipes come in various sizes and specifications to suit different applications, so selecting the right type of PVC braided hose for a specific purpose is crucial to ensure safety and efficiency. Additionally, local regulations and standards should be followed when installing PVC braided pipes for potable water or other critical applications.

A porous rubber hose is a type of hose made from rubber material that has small pores or holes throughout its structure. These pores allow liquids or gases to flow through the hose while also permitting the passage of air or other substances through the hose wall. Porous rubber hoses are used in various industrial, commercial, and residential applications for specific purposes. Here are a few common uses and characteristics of porous rubber hoses:

1. Drip Irrigation: Porous rubber hoses are often used in drip irrigation systems for watering plants. Water is released slowly and evenly through the pores in the hose, providing an efficient and controlled method of irrigation.

2. Air Diffusion: They can also be used for air diffusion in aquariums and fish tanks. The small pores in the hose release air bubbles into the water, helping to oxygenate the water and maintain a healthy aquatic environment.

3. Aeration: In wastewater treatment facilities and aquaculture, porous rubber hoses are used to aerate liquids. The hoses release air bubbles into the liquid, promoting the breakdown of organic matter and improving water quality.

4. Filtration: Some porous rubber hoses are designed for filtration purposes. They allow fluids to pass through while trapping solid particles or contaminants.

5. Soaker Hoses: Soaker hoses are a type of porous rubber hose used for garden irrigation. They allow water to seep out gradually along their length, providing a gentle and efficient way to water plants.

6. Chemical and Fluid Transfer: In industrial applications, porous rubber hoses can be used for transferring chemicals or fluids that require controlled dispensing or mixing.

7. Temperature Control: They can also be employed in systems where temperature control is essential, allowing for the passage of heated or cooled fluids through the hose while preventing heat loss or gain.

8. Moisture Barriers: In some construction applications, porous rubber hoses are used as moisture barriers. They can be embedded in concrete structures to help control moisture levels.

Porous rubber hoses come in various sizes, materials, and configurations to suit different applications. The size and porosity of the pores can be tailored to meet specific requirements. These hoses are typically durable and flexible, making them suitable for a range of applications where controlled fluid or gas flow is necessary.

The chemical composition of flexible rubber hoses can vary depending on the specific type of rubber used in their construction. Rubber hoses are typically made from synthetic rubber or a combination of synthetic and natural rubber. The most common types of synthetic rubber used in flexible hoses are:

1. **Nitrile Rubber (NBR):** Nitrile rubber is often used in hoses for oil and fuel applications. It has excellent resistance to oil, fuel, and other petroleum-based fluids.

2. **EPDM (Ethylene Propylene Diene Monomer):** EPDM rubber is known for its resistance to weathering, ozone, and UV exposure. It is commonly used in hoses for water and steam applications.

3. **Neoprene:** Neoprene is a type of synthetic rubber known for its resistance to oil, chemicals, and abrasion. It is often used in hoses for applications where resistance to oil and chemicals is important.

4. **SBR (Styrene Butadiene Rubber):** SBR is a versatile synthetic rubber that is commonly used in hoses for general-purpose applications. It offers good abrasion resistance.

5. **Natural Rubber:** While less common in flexible hoses due to its susceptibility to certain chemicals and weathering, natural rubber may be used in some applications.

In addition to the rubber material, flexible hoses may also contain reinforcement layers to enhance their strength and durability. Common reinforcement materials include:

1. **Textile Fabrics:** Cotton, polyester, or aramid fibers may be used to reinforce hoses for lower-pressure applications.

2. **Wire or Steel Braids:** High-pressure hoses may have layers of wire or steel braids to provide added strength and resistance to bursting.

It's important to note that the specific chemical composition and construction of a flexible rubber hose will depend on its intended use and the requirements of the application. Hoses designed for use with specific chemicals, temperatures, or pressures will be formulated accordingly to ensure optimal performance and safety. Always refer to the manufacturer's specifications and recommendations for the particular hose you are using.

XLPE (Cross-linked polyethylene) chemical rubber hoses are designed for the safe transfer of a wide range of aggressive chemicals, acids, solvents, and corrosive substances in industrial applications. These hoses possess several features that make them suitable for handling such hazardous materials efficiently and safely. Here are the key features of XLPE chemical rubber hoses:

1. **Chemical Resistance:** XLPE hoses are highly resistant to a broad spectrum of aggressive chemicals, including acids, alkalis, solvents, and various corrosive substances. This chemical resistance prevents degradation or breakdown of the hose material, ensuring safe material transfer without contamination.

2. **Cross-linked Polyethylene Construction:** The cross-linked polyethylene material used in these hoses offers enhanced strength, durability, and chemical resistance compared to standard polyethylene hoses, making them suitable for handling a wide range of aggressive fluids.

3. **Flexibility:** Despite their robust construction, XLPE chemical hoses are flexible, allowing easy handling, bending, and maneuverability during material transfer operations. This flexibility facilitates their use in various industrial settings and applications.

4. **Smooth Inner Lining:** These hoses typically feature a smooth, non-stick, and non-reactive inner lining that minimizes friction, allowing smooth and efficient flow of chemicals while reducing the risk of clogging or contamination.

5. **Reinforcement Layers:** Many XLPE chemical hoses are reinforced with multiple layers, such as high-strength synthetic textile cords or wire helixes, providing added strength and durability to withstand high pressures and handling.

6. **Weather and Temperature Resistance:** They exhibit resistance to weathering effects, UV rays, and extreme temperatures, ensuring their performance and integrity in diverse environmental conditions.

7. **Static Dissipation:** Some XLPE chemical hoses are designed with static dissipating materials or features to prevent the buildup of static electricity, reducing the risk of sparking and ensuring safety when handling flammable or combustible chemicals.

8. **Compliance with Safety Standards:** These hoses often comply with industry-specific safety standards and regulations, ensuring they meet quality, performance, and safety requirements for handling hazardous chemicals.

9. **Versatility:** XLPE chemical rubber hoses are suitable for use across various industries, including chemical processing plants, refineries, pharmaceuticals, petrochemicals, mining, and other industrial applications involving aggressive fluids.

In summary, XLPE chemical rubber hoses offer superior chemical resistance, flexibility, durability, and safety features necessary for handling aggressive chemicals and hazardous fluids in industrial settings. These hoses are engineered to maintain the integrity of the materials being transferred while ensuring safety and compliance with industry standards.

Silicone rubber hoses, often referred to as silicone hoses, are flexible tubing or pipes made from silicone rubber material. Silicone rubber is a synthetic elastomer known for its excellent temperature resistance, flexibility, and resistance to a wide range of chemicals and fluids. Silicone hoses are commonly used in various industries and applications where these properties are advantageous. Here are some key features and uses of silicone rubber hoses:

**Key Features:**

1. **Material:** Silicone rubber hoses are made from high-quality silicone rubber compounds. Silicone rubber offers exceptional temperature resistance, with the ability to withstand both high and low temperatures, making it suitable for extreme environments.

2. **Flexibility:** Silicone hoses are highly flexible and maintain their flexibility even at low temperatures. This flexibility allows for easy installation and routing in complex systems.

3. **Chemical Resistance:** Silicone rubber is generally resistant to a wide range of chemicals, including acids, bases, and many solvents. This chemical resistance makes silicone hoses suitable for various applications in different industries.

4. **Non-Toxic and FDA-Approved:** Silicone rubber is non-toxic, odorless, and tasteless, making it suitable for use in food and beverage applications. Many silicone hoses are FDA-approved for food-grade applications.

5. **Electrical Insulation:** Silicone rubber has excellent electrical insulation properties, making it suitable for applications where electrical isolation is required.

6. **UV and Weather Resistance:** Silicone hoses are resistant to UV radiation and weathering, making them suitable for outdoor and exposed applications.

7. **Transparency:** Some silicone hoses are transparent or translucent, allowing for visual inspection of the fluid flow.

8. **Smooth Inner Surface:** Silicone hoses often have a smooth inner surface, which reduces flow resistance and minimizes the risk of particulate buildup.

**Uses:**

Silicone rubber hoses find applications in various industries and settings, including:

1. **Automotive:** They are used for coolant and radiator hoses, turbocharger hoses, intake and exhaust systems, and vacuum lines in vehicles.

2. **Medical and Pharmaceutical:** Silicone hoses are used in medical equipment, pharmaceutical processing, and healthcare applications due to their non-toxic and biocompatible properties.

3. **Food and Beverage:** Silicone hoses are commonly used in the food and beverage industry for transferring liquids, syrups, and other consumable products.

4. **Industrial and Chemical Processing:** They are used in industrial processes that involve the transfer of chemicals, acids, and corrosive fluids.

5. **Aerospace:** Silicone hoses are used in aircraft and spacecraft systems due to their temperature resistance and durability.

6. **Laboratory and Scientific:** Silicone hoses are used in laboratories and scientific research settings for various fluid-handling tasks.

7. **Electronics and Electrical:** They find applications in electrical and electronic equipment as insulating and cooling components.

8. **Marine:** Silicone hoses are used in marine applications for cooling systems, engine ventilation, and other fluid transfer tasks.

Proper selection and installation of silicone hoses are essential for ensuring their long-term performance in specific applications. When selecting silicone hoses, it's important to consider factors such as temperature requirements, chemical compatibility, and pressure ratings to meet the needs of the intended application. Regular inspection and maintenance are also recommended to ensure the hoses remain in good condition and perform reliably over time.

A dredge delivery rubber hose is a specialized type of rubber hose designed for use in dredging operations. Dredging is the process of excavating and removing sediment, silt, sand, and other materials from bodies of water, such as rivers, lakes, harbors, and coastal areas. Dredge delivery hoses are a crucial component of the equipment used in these operations. Here are some key features and considerations related to dredge delivery rubber hoses:

1. Material: Dredge delivery hoses are typically made from high-quality and wear-resistant rubber compounds. The choice of rubber material is critical to ensure durability and resistance to abrasion and chemical exposure from the materials being dredged.

2. Reinforcement: These hoses are reinforced with multiple layers of fabric or synthetic materials to provide strength and prevent collapse under suction or pressure. The reinforcement also helps maintain the hose's structural integrity.

3. Diameter and Length: Dredge delivery hoses come in various diameters and lengths to accommodate different dredging equipment and requirements. The selection depends on the specific dredging project and the volume of material to be transported.

4. Flange End Connections: Dredge delivery hoses are often equipped with flange end connections to attach to the dredge pump and the discharge or delivery pipes. The flanges provide a secure and leak-proof connection.

5. Wear Resistance: Given the abrasive nature of the materials being dredged, these hoses are designed to resist wear and tear over extended periods of use.

6. Pressure Rating: Dredge delivery hoses must have a suitable pressure rating to handle the high pressures generated by the dredge pump while maintaining structural integrity.

7. Flexibility: These hoses need to be flexible to allow easy positioning and movement during dredging operations. Flexibility also helps prevent kinking or twisting.

8. Buoyancy: Some dredge delivery hoses may have buoyancy characteristics to help keep them afloat and prevent them from sinking into the dredged material.

9. Temperature and Chemical Resistance: Depending on the specific application, these hoses may need to withstand extreme temperatures and exposure to chemicals present in the water or sediment.

Dredge delivery rubber hoses play a crucial role in the efficient and effective removal of sediments and materials from water bodies, which is essential for maintaining navigable waterways, improving water quality, and preventing flooding. Proper selection, installation, and maintenance of these hoses are essential for the success of dredging operations and for minimizing downtime due to hose failure.

Dear Sir/Madam,

I hope this letter finds you well. I am writing to introduce myself and Sandhya Enterprises, a leading manufacturer specializing in PVC Water Stopper for the construction industry.

At Sandhya Enterprises, we pride ourselves on delivering high-quality construction products tailored to meet the diverse needs of our clients. Cement Feeding Rubber Hose in countries like Malaysia, Kenya, Ghana, Sri Lanka, and all over India, we have established ourselves as a trusted name in the industry, consistently exceeding customer expectations.

What sets us apart is our unwavering commitment to innovation and customer satisfaction. We invest heavily in research and development, ensuring that our products remain at the forefront of technological advancements in the construction industry. We understand that every project is unique, and we work closely with our clients to provide customized solutions that address their specific requirements.

In addition to our cutting-edge manufacturing capabilities, we take great pride in our team of skilled professionals who are passionate about delivering excellence. Our dedicated team works tirelessly to ensure timely delivery, impeccable quality control, and exceptional customer service. We strive to build long-lasting partnerships with our clients based on trust, reliability, and mutual success.

I invite you to explore our comprehensive product portfolio and discover how Sandhya Enterprises can add value to your upcoming construction projects. I would be delighted to arrange a meeting at your convenience to discuss your specific needs and explore potential collaborations.

We look forward to the opportunity of working with you and contributing to the success of your future endeavours.

It seems like you're asking about a "Concrete End Hose." In the context of construction and concrete pumping equipment, a concrete end hose is a specialized rubber hose that is attached to the end of a concrete placing boom or concrete pump. These hoses are used in concrete placement operations to deliver concrete from the pump to the desired location, such as a construction site, where it is needed for pouring and shaping.

Key features and considerations for concrete end hoses include:

1. Material: Concrete end hoses are typically made of high-quality rubber or other durable materials that can withstand the abrasive nature of concrete and the high pressure generated by concrete pumps.

2. Reinforcement: They often have multiple layers of reinforcement, such as steel wires, to provide strength and durability.

3. Length and Diameter: Concrete end hoses come in various lengths and diameters to suit different pumping requirements and the distance between the pump and the placement area.

4. Fittings: These hoses are equipped with couplings or fittings at the ends that can connect to the concrete pump and the nozzle or placement device.

5. Abrasion Resistance: Given that concrete can be abrasive, these hoses are designed to resist wear and tear over time.

6. Pressure Rating: Concrete pumps generate high pressures to move the concrete, so the hoses must have a suitable pressure rating to handle the job safely.

7. Flexibility: They need to be flexible enough to maneuver and direct the flow of concrete during placement.

Concrete end hoses are an essential component of concrete pumping systems, and their proper selection and maintenance are crucial for the safe and efficient placement of concrete in construction projects. Users should adhere to manufacturer recommendations and safety guidelines to ensure the integrity and longevity of these hoses.

A water suction and discharge rubber hose is a type of flexible hose designed for the suction and discharge of water and other fluids in various industrial, agricultural, and construction applications. These hoses are constructed from high-quality rubber or synthetic rubber compounds to withstand the rigors of fluid handling, and they are reinforced with layers of fabric, wire, or both to handle the pressure and vacuum requirements of the intended application. Here are some key features and uses of water suction and discharge rubber hoses:

**Key Features:**

1. **Material:** Water suction and discharge hoses are typically made from natural rubber, synthetic rubber (such as EPDM or SBR), or a combination of rubber compounds that are compatible with the fluids being transported.

2. **Reinforcement:** To provide strength and durability, these hoses are reinforced with one or more layers of textile fabric, wire helix, or synthetic fibers. The choice of reinforcement depends on the specific application and working pressure requirements.

3. **Inner Lining:** The inner lining of the hose is usually smooth to facilitate the smooth flow of fluids and reduce friction losses.

4. **Outer Cover:** The outer cover is designed to protect the hose from abrasion, weathering, and environmental factors.

5. **Fittings and Connectors:** Water suction and discharge hoses are often equipped with a variety of fittings, couplings, or connectors at both ends to facilitate easy connections to pumps, valves, and other equipment.

6. **Size and Length:** These hoses come in various sizes and lengths to accommodate different flow rates and installation requirements.

7. **Temperature Range:** The hoses are engineered to handle a wide range of temperatures, making them suitable for both hot and cold water applications.

**Uses:**

Water suction and discharge rubber hoses find applications in a variety of industries and settings, including:

1. **Agriculture:** These hoses are used for irrigation, dewatering, and water transfer in agricultural operations, including farm equipment and crop irrigation systems.

2. **Construction:** They are employed in construction sites for dewatering excavations, transferring water, and controlling sediment.

3. **Mining:** Water suction and discharge hoses are used in mining operations for dewatering mines, transferring water, and handling slurry.

4. **Municipal Services:** They are used by municipal services for water supply and distribution, wastewater treatment, and emergency response situations.

5. **Industrial Processes:** These hoses are used in various industrial processes for fluid handling, including manufacturing, food processing, and chemical processing.

6. **Marine:** In marine applications, they are used for bilge pumping, ballast transfer, and other water-related tasks on ships and offshore platforms.

7. **Environmental Services:** Water suction and discharge hoses are used by environmental services for cleanup and removal of water, chemicals, and hazardous materials.

8. **Firefighting:** In firefighting operations, suction hoses are used to draw water from natural sources like lakes or ponds, while discharge hoses are used to deliver water to firefighting equipment.

Proper selection, installation, and maintenance of water suction and discharge rubber hoses are crucial for their effective performance. Hoses should be chosen based on factors such as size, working pressure, temperature range, and compatibility with the fluids being transported. Regular inspections and replacement of hoses that show signs of wear, damage, or deterioration are essential to maintain system integrity and prevent leaks or disruptions during fluid transfer operations.

A flexible rubber hose with a flange is a type of rubber hose that features flanged ends or connectors. These flanges are designed to facilitate secure and leak-proof connections between the hose and other equipment or piping components, such as pumps, valves, tanks, or other hoses. Flexible rubber hoses with flanges are commonly used in various industrial applications where the transfer of fluids, gases, or materials requires a reliable and sealed connection.

Here are some key features and considerations related to flexible rubber hoses with flanges:

**Key Features:**

1. **Material:** The hose itself is typically made from high-quality rubber or synthetic rubber compounds that offer flexibility, durability, and resistance to abrasion, chemicals, and weathering. The choice of rubber material may depend on the specific application and the fluid or material being transferred.

2. **Reinforcement:** These hoses are often reinforced with layers of high-strength materials, such as textile fabric, steel wire, or synthetic fibers. The reinforcement provides structural integrity and prevents hose collapse or bursting under pressure.

3. **Flange Ends:** Flexible rubber hoses with flanges have flanged connectors at each end. These flanges are usually made of metal, such as carbon steel or stainless steel, and are designed to match industry-standard flange dimensions.

4. **Flange Types:** There are different types of flanges, including slip-on flanges, weld-neck flanges, and others, each with its specific use and connection method. The choice of flange type depends on the application.

5. **Size and Pressure Rating:** These hoses come in various sizes and pressure ratings to accommodate different flow rates, fluid pressures, and connection requirements.

6. **Flexibility:** Flexible rubber hoses are designed to be flexible and adaptable, allowing for movement and positioning within the system. This flexibility helps prevent kinking or twisting during operation.

**Applications:**

Flexible rubber hoses with flanges find applications in a wide range of industries and settings, including:

1. **Chemical Processing:** They are used in chemical plants to transfer various chemicals, acids, and corrosive fluids between different parts of the processing system.

2. **Petroleum and Oil Industries:** These hoses are employed in the transportation of crude oil, refined petroleum products, and other hydrocarbons in refineries, tank farms, and distribution facilities.

3. **Water and Wastewater Treatment:** They can be used in water treatment plants and wastewater facilities to transfer water, sludge, and chemicals.

4. **Maritime and Offshore:** Flexible rubber hoses with flanges are used in ship and offshore platform systems for the transfer of various liquids, including seawater, oil, and fuels.

5. **Industrial Manufacturing:** They find applications in various industrial processes, including food and beverage manufacturing, pharmaceuticals, and power generation.

6. **Construction and Mining:** These hoses are used for dewatering, slurry transfer, and other fluid-handling tasks in construction sites and mining operations.

Proper selection, installation, and maintenance of flexible rubber hoses with flanges are essential for ensuring their integrity and safe operation. Inspection and replacement of hoses that show signs of wear, damage, or deterioration are crucial for preventing leaks or disruptions in fluid transfer processes. Additionally, adherence to industry standards and safety guidelines is essential when using these hoses in industrial applications.

IS 7654 is an Indian Standard specification for "Rubber Hose for Chemicals." This standard is published by the Bureau of Indian Standards (BIS), which is responsible for the development and maintenance of national standards in India.

The IS 7654 standard provides guidelines and requirements for rubber hoses that are specifically designed for conveying various chemicals. These hoses are typically used in industrial and chemical applications where the safe and reliable transfer of chemicals is essential. The standard covers aspects such as the construction, materials, dimensions, performance requirements, and testing procedures for chemical rubber hoses.

If you need detailed information about the specific requirements and specifications outlined in IS 7654, I recommend contacting the Bureau of Indian Standards (BIS) or referring to the official documentation provided by BIS for this standard. Standards like IS 7654 are important to ensure the safety and quality of products used in various industries.

IS: 7654 is an Indian Standard specification for Chemical Rubber Hose. This standard is published by the Bureau of Indian Standards (BIS), which is a national standards body in India responsible for the development and maintenance of various standards across different industries.

The IS: 7654 standard specifies the requirements for rubber hoses used for conveying chemicals. These hoses are designed to handle various types of chemicals and are typically used in industries where the safe transfer of chemicals is essential, such as in chemical manufacturing, pharmaceuticals, and other related industries.

The standard provides specifications for various aspects of chemical rubber hoses, including:

1. Construction: It outlines the construction requirements of the hose, including the type of rubber used, reinforcement layers, and the overall design.

2. Dimensions: The standard specifies the dimensions of the hose, including its inner diameter, outer diameter, and length.

3. Performance Requirements: IS: 7654 outlines performance requirements such as the ability of the hose to withstand a certain level of pressure, temperature, and chemical resistance.

4. Testing Methods: It provides testing methods and procedures to evaluate the performance and quality of chemical rubber hoses.

5. Marking and Packaging: The standard also includes requirements for marking and packaging of these hoses to ensure proper identification and handling.

It's important to note that standards like IS: 7654 are used to ensure the safety and reliability of products in various industries. When selecting and using chemical rubber hoses, it is advisable to follow the relevant standards and guidelines to ensure that they meet the required specifications and can safely handle the intended chemicals. Additionally, compliance with such standards may be a legal or regulatory requirement in certain industries and regions.

An oil suction rubber hose is a type of flexible hose designed for the safe and efficient transfer of various oil-based liquids, such as petroleum, diesel, and lubricating oils. These hoses are commonly used in industrial applications, including oil refineries, chemical plants, construction sites, and transportation of oil products. Here are some key features and information about oil suction rubber hoses:

1. **Material:** Oil suction rubber hoses are typically constructed using high-quality synthetic rubber compounds that are resistant to the corrosive and abrasive properties of oil and oil-based products. These hoses may also have a reinforcement layer made of fabric, steel wire, or other materials for added strength and durability.

2. **Structure:** They are designed with a flexible inner tube that comes into contact with the oil and a durable outer cover that protects the hose from external factors like abrasion, weather, and chemicals.

3. **Suction Capability:** The primary function of these hoses is to create a vacuum, allowing them to effectively suck and transport oil or other liquids. They are designed to handle both suction and discharge tasks, making them versatile for various applications.

4. **Size and Diameter:** Oil suction rubber hoses come in different sizes and diameters to suit the specific needs of the application. The choice of size depends on factors such as the flow rate, pressure, and the type of oil being transferred.

5. **Temperature and Pressure Resistance:** These hoses are engineered to withstand a wide range of temperatures and pressures commonly encountered in industrial and oil transfer processes.

6. **Flexibility:** They are highly flexible to facilitate easy handling, installation, and routing around obstacles.

7. **End Fittings:** Oil suction rubber hoses can have various end fittings, such as couplings or flanges, to connect them to the equipment, storage tanks, or pipelines involved in the oil transfer process.

8. **Safety Considerations:** It's essential to follow safety guidelines and standards when using oil suction rubber hoses to prevent leaks, spills, and accidents during the transfer of oil and other hazardous materials.

9. **Maintenance:** Regular inspection and maintenance are necessary to ensure the integrity and performance of oil suction hoses. This includes checking for signs of wear, damage, or deterioration, as well as cleaning and storage practices.

Oil suction rubber hoses are crucial components in many industries where the safe and efficient transfer of oil-based liquids is required. Choosing the right type and size of hose for a specific application is essential to ensure the smooth and reliable operation of the equipment and processes involved. Manufacturers and suppliers often provide detailed specifications and guidelines to assist in selecting the appropriate hose for a given task.

sandhya enterprises manufactrer and supplier of bulker cement unlaoding rubber hose.

size: 4" id both end ms flange

5" id with both end ms flange.

working pressure 10kg/cm2

and working pressure 15kg/cm2

A bulker unloading rubber hose, also known as a bulk material handling hose or bulk discharge hose, is a specialized hose designed for the unloading or transfer of bulk materials such as powders, grains, pellets, or granules from a bulk carrier or silo to a storage facility or processing equipment. It is commonly used in industries such as agriculture, mining, chemical processing, and construction.

The key features and characteristics of a bulker unloading rubber hose include:

1. Material compatibility: Bulker unloading rubber hoses are constructed with a lining made of abrasion-resistant rubber or synthetic materials. This lining is specifically designed to withstand the abrasive nature of bulk materials and prevent wear and damage to the hose during unloading or transfer.

2. Reinforcement: The inner lining is reinforced with high-strength textile or steel wire braids or spirals to provide structural integrity and prevent the hose from bursting under pressure. The reinforcement enhances the hose's ability to handle the demanding conditions of bulk material transportation.

3. Flexibility: Bulker unloading rubber hoses are designed to be flexible, allowing for easy handling and installation. This flexibility enables the hose to accommodate movement during the unloading process and reach different points in the material handling system.

4. Pressure resistance: The hose is engineered to withstand the specific working pressures involved in bulk material transfer. It is designed to maintain its integrity and prevent leaks or bursts during operation.

5. Size and fittings: Bulker unloading rubber hoses are available in various diameters and lengths to suit different application requirements. They can be fitted with standard couplings or connections for easy attachment to bulk carriers, silos, or other material handling equipment.

6. Chemical resistance: Depending on the specific application, bulker unloading rubber hoses may be designed to have chemical resistance properties to withstand the corrosive nature of certain materials or the presence of chemicals used in the process.

Regular inspection and maintenance of the bulker unloading rubber hose are necessary to identify signs of wear, damage, or deterioration. Any worn or damaged hoses should be replaced promptly to prevent leaks or disruptions in the bulk material handling process.

Consulting with reputable suppliers or manufacturers of bulker unloading rubber hoses is recommended to ensure the selection of the appropriate hose that meets the specific requirements of bulk material transfer and complies with industry standards and regulations.

Application of Cement Hose:Cement Feeding Rubber Hoseis used for spraying cement grout at irrigation projects, buildings, dams, sites, dams, bridges and roads in the hilly terrains.

Construction:

Lining:It is a uniform, seamless and extra thick tube of natural, synthetic and blend rubber compound. It offers excellent abrasion resistance which is free from air blisters, porosity and other defects.

Reinforcement:Woven textiles or braided high strength natural/ synthetic yarns that are impregnated by piles of rubber

Cover:It is a suitable rubber compound having a cloth marked finish making it weather and abrasion resistant.

Electrical Bonding:To provide electrical continuity throughout the length of the hose, a stand of copper wire is embedded in the reinforcement plies.

As per IS: IS: 13071-1991 Specification

Construction:

Lining: Smooth lining of suitable rubber.

Compounds: highly resistant to petroleum products.

Reinforcement: Plies of woven textile coated with rubber on both sides with a suitable rubber compound and helical GI wire embedded between the fabric plies.

Cover: Smooth or corrugated high grade rubber compound for excellent resistant to weather, abrasion and petroleum products.