GST : 36GNLPS1299P1ZS
4.5/5
Our Products
Sandhya Enterprises manufacturer and Supplier of Slurry and Mud Rubber Hose.\r\nRubber Hose for Cement Grouting\r\nMEETS IS : 5137\r\nW.P. 10kgf/cm2\r\nMIN. B.P. 40 kgf/cm2\r\n25.0\r\n31.0\r\n38.0\r\n50.0\r\n63.0\r\n75.0\r\nTube : Highly abrasion resistant soft natural rubber\r\ncompound.\r\nReinforcement : Woven/Braided or spirally More..
sandhya enterprises manufactuer and supplier of slurry and mud rubber suction hose.
rnand mud rubber hose
rnsandhya enterprises manufacturer and supplier of slurry and mud rubber hose. Rubber hose for cement grouting meets is : 5137 w.p. 10kgf/cm2 min. B.p. 40 kgf/cm2 25.0 31.0 38.0 50.0 63.0 75.0 tube : highly abrasion resistant soft natural rubber compound. Reinforcement : woven/braided or spirally wound textile of high strength synthetic fibres. Electrical bonding : low resistant electrical bonding wire in-corporated between the reinforcement plies to pro vide electrical continuity along the whole length of the hose. Cover : cloth marked finish cover, resistant to weather and abrasion. Used for cement grouting at irrigations projects, buildings sites, bridges etc. Service temp. Range : -400 f to + 1580 f. Size: 3\\\" id to 12\\\" id 3\\\" id x 5mtr (lg) with soft end 3\\\" id x 5mtr (lg) with both side ms flange as per asa 150# 4\\\" id x 5mtr (lg) with soft end 4\\\" id x 5mtr (lg) with both side ms flange as per asa 150# 5\\\" id x 5mtr (lg) with soft end 5\\\" id x 5mtr (lg) with both side ms flange as per asa 150# 6\\\" id x 5mtr (lg) with soft end 6\\\" id x 5mtr (lg) with both side ms flange as per asa 150# 8\\\" id x 5mtr (lg) with soft end 8\\\" id x 5mtr (lg) with both side ms flange as per asa 150# 10\\\" id x 5mtr (lg) with soft end 10\\\" id x 5mtr (lg) with both side ms flange as per asa 150# 12\\\" id x 5mtr (lg) with soft end 12\\\" id x 5mtr (lg) with both side ms flange as per asa 150# 14\\\" id x 4mtr (lg) with soft end 14\\\" id x 4mtr (lg) with both side ms flange as per asa 150# 16\\\" id x 4mtr (lg) with soft end 16\\\" id x 4mtr (lg) with both side ms flange as per asa 150#
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Here you go a complete and professional set of **packaging details for slurry rubber hoses**, suitable for use in product catalogs, export documents, or client specs.
---
### **Packaging Details Slurry Rubber Hose**
**Attribute** **Details**
----------------------------------------------------------------------------------------------------------
**Packaging Type** Coiled and plastic-wrapped, optionally palletized
**Unit per Package** 1 hose per coil or bundle
**Packaging Material** Stretch film / Woven sack / PE wrap / Wooden pallet (as per requirement)
**Sealing Method** Strapped with nylon/tape bands
**Labeling** Product label with size, batch number, barcode, and handling instructions
**Standard Dimensions** Depends on hose size e.g., 4" 10 m 70 70 30 cm (coiled)
**Net Weight** Varies e.g., 2560 kg per hose
**Gross Weight** Net weight + 24 kg (packaging)
**Pallet Size (if used)** Standard: 100 100 cm or 120 100 cm
**Quantity per Pallet** 36 hoses, depending on diameter/length
**Stacking Info** Max 2 pallets high, non-stackable if oversized
**Storage Instructions** Store in a dry, shaded area; avoid direct sun and high temperatures
**Shipping Marks** As per client/export standard
**Port of Dispatch** [e.g. Mundra / Nhava Sheva / Chennai Port, India]
---
### Sample JSON Format:
```json
"packagingType": "Coiled and plastic-wrapped",
"unitPerPackage": 1,
"packagingMaterial": "PE wrap + nylon strap",
"labeling": "Size, batch number, barcode",
"netWeight": "2560 kg (depending on size)",
"grossWeight": "Net + 3 kg",
"dimensions": "Varies by hose size",
"palletized": true,
"palletSize": "120 x 100 cm",
"quantityPerPallet": 4,
"stackingLimit": "2 pallets max",
"storageInstructions": "Store in cool, dry area away from sunlight",
"portOfDispatch": "Nhava Sheva, India"
```
---
Would you like a **PDF-ready packaging sheet**, or a version formatted for Excel? I can also help you design a **visual layout** of the packed product if you're preparing for shipping or marketing.
Delivery Time : 7 to 15days
Sandhya Enterprises Manufacturer and Supplier of Slurry and Mud Rubber Hose.
.
and Mud Rubber Hose
Sandhya Enterprises manufacturer and Supplier of Slurry and Mud Rubber Hose.Rubber Hose for Cement GroutingMEETS IS : 5137W.P. 10kgf/cm2MIN. B.P. 40 kgf/cm225.031.038.050.063.075.0Tube : Highly abrasion resistant soft natural rubbercompound.Reinforcement : Woven/Braided or spirally woundtextile of high strength synthetic fibres.Electrical bonding : low resistant electricalbonding wire in-corporated between thereinforcement plies to pro vide electrical continuity alongthe whole length of the hose.Cover : Cloth marked finish cover, resistant to weatherand abrasion.Used for cement Grouting at irrigationsprojects, buildings sites, bridges etc.Service Temp. Range : -400 F to + 1580 F. size: 3" ID to 12" ID3" ID x 5Mtr (LG) with Soft End3" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#4" ID x 5Mtr (LG) with Soft End4" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#5" ID x 5Mtr (LG) with Soft End5" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#6" ID x 5Mtr (LG) with Soft End6" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#8" ID x 5Mtr (LG) with Soft End8" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#10" ID x 5Mtr (LG) with Soft End10" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#12" ID x 5Mtr (LG) with Soft End12" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#14" ID x 4Mtr (LG) with Soft End14" ID x 4Mtr (LG) with Both Side MS Flange as per ASA 150#16" ID x 4Mtr (LG) with Soft End16" ID x 4Mtr (LG) with Both Side MS Flange as per ASA 150#
Additional Information:
Payment Terms : T/T
Packaging Details : Packing with hdpe cove
Delivery Time : 7 to 15days
Sandhya Enterprises Manufacturer and Supplier of Cement Grounding Rubber Hose.Rubber Hose for Cement Grouting MEETS IS : 5137 W.P. 10kgfcm2 MIN. B.P. 40 kgfcm2 25.0 31.0 38.0 50.0 63.0 75.0 100.0 125.0 150.0 200.0mm 250.0mm Tube : Highly abrasion resistant soft natural rubber compound. Reinforcement : WovenBraided or spirally wound textile of high strength synthetic fibres. Electrical bonding : low resistant electrical bonding wire in-corporated between the reinforcement plies to pro vide electrical continuity along the whole length of the hose. Cover : Cloth marked finish cover, resistant to weather and abrasion. A slurry rubber hose, also known as a slurry handling hose or slurry discharge hose, is a specialized hose designed for the transportation of abrasive and viscous slurries in industries such as mining, dredging, and mineral processing. Slurries are mixtures of solid particles suspended in a liquid, typically water. The key features and characteristics of a slurry rubber hose include: 1. Material compatibility: Slurry rubber hoses are constructed with a lining made of abrasion-resistant rubber or synthetic materials. The lining is specifically designed to withstand the abrasive nature of the slurry and prevent wear and damage to the hose during transportation. 2. Reinforcement: The inner lining is reinforced with high-strength textile or steel wire braids to provide structural integrity and prevent the hose from bursting under pressure. The reinforcement enhances the hose's ability to handle the demanding conditions of slurry transportation. 3. Flexibility: Slurry rubber hoses are designed to be flexible, allowing for easy handling and installation. This flexibility enables the hose to navigate through tight spaces, bend around obstacles, and accommodate movement during the slurry transfer process. 4. Pressure resistance: Slurry rubber hoses are engineered to withstand the specific working pressures involved in slurry transportation. They are designed to maintain their integrity and prevent leaks or bursts during operation. 5. Size and fittings: Slurry rubber hoses are available in various diameters and lengths to suit different application requirements. They can be fitted with standard couplings or connections for easy attachment to slurry pumps, dredging equipment, or other machinery. 6. Chemical resistance: Slurry rubber hoses may be designed to have chemical resistance properties to withstand the corrosive nature of certain slurry materials or the presence of chemicals used in the process. Regular inspection and maintenance of the slurry rubber hose are necessary to identify signs of wear, damage, or deterioration. Any worn or damaged hoses should be replaced promptly to prevent leaks or disruptions in the slurry transportation process. It is important to consult with reputable suppliers or manufacturers of slurry rubber hoses to ensure the selection of the appropriate hose that meets the specific requirements of slurry handling and complies with industry standards and regulations. The packing details of a slurry rubber hose can vary depending on the manufacturer, supplier, and specific product. However, here are some general packing details that you may commonly find: 1. Quantity: The packaging should indicate the number of slurry rubber hoses included in a single pack. It can range from one hose to multiple hoses, depending on the packaging configuration and the supplier's specifications. 2. Size and Length: The packaging may specify the size and length of the slurry rubber hose. This information helps determine if the hose is suitable for the intended application. The size typically corresponds to the inner diameter of the hose, while the length indicates the overall hose length. 3. Material: The packaging may mention the specific rubber material used for the hose construction. Slurry rubber hoses are typically made from natural rubber or synthetic rubber compounds that offer excellent a
Additional Information:
Payment Terms : L/C
Packaging Details : The packing details of a slurry rubber hose can vary depending on the manufacturer, supplier, and specific product. However, here are some general packing details that you may commonly find:
1. Quantity: The packaging should indicate the number of slurry rubber hoses included in a single pack. It can range from one hose to multiple hoses, depending on the packaging configuration and the supplier's specifications.
2. Size and Length: The packaging may specify the size and length of the slurry rubber hose. This information helps determine if the hose is suitable for the intended application. The size typically corresponds to the inner diameter of the hose, while the length indicates the overall hose length.
3. Material: The packaging may mention the specific rubber material used for the hose construction. Slurry rubber hoses are typically made from natural rubber or synthetic rubber compounds that offer excellent abrasion resistance, flexibility, and resistance to chemicals and abrasive materials present in the slurry.
4. Reinforcement: Slurry rubber hoses often feature reinforcement layers for added strength and durability. The packaging may indicate the type and number of reinforcement layers, such as textile, wire, or fabric. The reinforcement layers help the hose withstand the high-pressure conditions and abrasive nature of slurry transportation.
5. Pressure Rating: The packaging may indicate the pressure rating of the slurry rubber hose, providing information about the maximum pressure it can withstand during operation. This information ensures that the hose is suitable for the specific slurry transportation system.
6. Temperature Range: The packaging may specify the temperature range within which the slurry rubber hose can effectively perform. This information ensures that the hose can handle the temperature variations encountered during slurry transportation.
7. Color: Slurry rubber hoses are commonly available in black or other dark colors, which help conceal any soiling or staining that may occur during use.
8. Packaging Material: The packaging itself may be mentioned, indicating the type of material used, such as cardboard boxes or plastic wrapping. The packaging should provide sufficient protection to prevent damage during transportation and storage.
9. Additional Components: Depending on the specific product, the packaging may include additional components such as hose fittings, clamps, or other accessories required for installation or connection to the slurry transportation system.
It's important to note that the specific details and packaging may vary between manufacturers and suppliers. Therefore, it is always recommended to refer to the packaging or contact the manufacturer or supplier directly for accurate and up-to-date information regarding the packing details of a particular slurry rubber hose.
Sandhya Enterprises manufacturer and Supplier of Slurry Rubber Suction Hose ID 3" to 12" Length -15Mtr (max) With Flange Fitting Working Pressure 10-25Kgs/cm2 A slurry rubber hose, also known as a slurry handling hose or slurry discharge hose, is a specialized hose designed for the transportation of abrasive and viscous slurry materials in various industries such as mining, dredging, and construction. Slurry is a mixture of solid particles suspended in a liquid, typically water. A slurry rubber hose is a specialized hose designed for the transportation of slurry, which is a mixture of solid particles and liquid. Slurry rubber hoses are specifically engineered to handle abrasive materials and harsh operating conditions. While the specific packing details may vary depending on the manufacturer and supplier, here are some general considerations: 1. Quantity: The packaging should indicate the number of slurry rubber hoses included in a single pack. It can range from one hose to multiple hoses, depending on the packaging configuration and supplier's specifications. 2. Size and Length: The packaging may specify the size and length of the slurry rubber hose. The size typically corresponds to the inner diameter, while the length indicates the overall hose length. 3. Material: The packaging may mention the specific rubber material used for the hose construction. Slurry rubber hoses are typically made from natural rubber or synthetic rubber compounds that offer excellent abrasion resistance, flexibility, and resistance to the chemicals present in the slurry. 4. Reinforcement: Slurry rubber hoses often feature reinforcement layers for added strength and durability. The packaging may indicate the type and number of reinforcement layers, such as textile, wire, or fabric, to withstand the high-pressure and abrasive nature of the slurry. 5. Pressure Rating: The packaging may indicate the pressure rating of the slurry rubber hose, providing information about the maximum pressure it can withstand during operation. 6. Temperature Range: The packaging may specify the temperature range within which the slurry rubber hose can effectively perform. This information ensures that the hose can handle the temperature variations encountered during slurry transportation. 7. Color: Slurry rubber hoses are commonly available in black or other dark colors, which help conceal any soiling or staining that may occur during use. 8. Packaging Material: The packaging itself may be mentioned, indicating the type of material used, such as cardboard boxes or plastic wrapping. The packaging should provide sufficient protection to prevent damage during transportation and storage. 9. Additional Components: Depending on the specific product, the packaging may include additional components such as hose fittings, clamps, or other accessories required for installation or connection to the slurry transportation system. It's important to note that the specific details and packaging may vary between manufacturers and suppliers. Therefore, it is always recommended to refer to the packaging or contact the manufacturer or supplier directly for accurate and up-to-date information regarding the packing details of a particular slurry rubber hose. The key features and characteristics of a slurry rubber hose include: 1. Material compatibility: Slurry rubber hoses are constructed with a lining made of abrasion-resistant rubber or synthetic materials. This lining is specifically designed to withstand the abrasive nature of the slurry and prevent wear and damage to the hose during transportation. 2. Reinforcement: The inner lining is reinforced with high-strength textile or steel wire braids to provide structural integrity and prevent the hose from bursting under pressure. The reinforcement enhances the hose's ability to handle the demanding conditions of slurry transportation. 3. Flexibility: Slurry rubber hoses are designed to be flexible, allowing for easy
Additional Information:
Payment Terms : T/T
Delivery Time : 10 to 15 days
sandhya enterprises manufacturer and supplier of rubber hose size 1" id to 12" id length 15mtr (max), working pressure 10 to 25bar sandhya enterprises manufacturer and supplier of slurry and mud rubber hose. Rubber hose for cement grouting meets is : 5137 w.p. 10kgf/cm2 min. B.p. 40 kgf/cm2 25.0 31.0 38.0 50.0 63.0 75.0 tube : highly abrasion resistant soft natural rubber compound. Reinforcement : woven/braided or spirally wound textile of high strength synthetic fibres. Electrical bonding : low resistant electrical bonding wire in-corporated between the reinforcement plies to pro vide electrical continuity along the whole length of the hose. Cover : cloth marked finish cover, resistant to weather and abrasion. Used for cement grouting at irrigations projects, buildings sites, bridges etc. Service temp. Range : -400 f to + 1580 f. Size: 3" id to 12" id 3" id x 5mtr (lg) with soft end 3" id x 5mtr (lg) with both side ms flange as per asa 150# 4" id x 5mtr (lg) with soft end 4" id x 5mtr (lg) with both side ms flange as per asa 150# 5" id x 5mtr (lg) with soft end 5" id x 5mtr (lg) with both side ms flange as per asa 150# 6" id x 5mtr (lg) with soft end 6" id x 5mtr (lg) with both side ms flange as per asa 150# 8" id x 5mtr (lg) with soft end 8" id x 5mtr (lg) with both side ms flange as per asa 150# 10" id x 5mtr (lg) with soft end 10" id x 5mtr (lg) with both side ms flange as per asa 150# 12" id x 5mtr (lg) with soft end 12" id x 5mtr (lg) with both side ms flange as per asa 150# 14" id x 4mtr (lg) with soft end 14" id x 4mtr (lg) with both side ms flange as per asa 150# 16" id x 4mtr (lg) with soft end 16" id x 4mtr (lg) with both side ms flange as per asa 150# A cement feeding rubber hose, also known as a cement discharge hose or cement delivery hose, is a specialized hose used for the transfer of cement or concrete in construction and industrial applications. It is designed to withstand the abrasive nature of cement and concrete mixtures while providing a flexible and reliable conduit for their transportation. Cement feeding rubber hoses are typically constructed with a durable inner lining made of synthetic rubber or natural rubber compounds. This lining is designed to resist the abrasion and degradation caused by the movement of cement and concrete materials. It is reinforced with multiple layers of high-strength synthetic fibers or steel wire braids to provide structural integrity and resistance to bursting under pressure. The outer cover of the hose is often made of a synthetic rubber compound that provides protection against external factors such as weathering, UV radiation, and physical damage. It may also have a fabric impression or wrapping for added reinforcement and protection. Key features and characteristics of cement feeding rubber hoses include: 1. Abrasion resistance: The inner lining of the hose is specifically formulated to withstand the abrasive action of cement and concrete mixtures, reducing wear and extending the hose's service life. 2. Flexibility: Cement feeding hoses are designed to be flexible and maneuverable, allowing for easy handling and movement during the cement delivery process. 3. Pressure resistance: The hose is constructed to withstand the working pressures involved in cement and concrete pumping, ensuring safe and reliable operation. 4. Compatibility: Cement feeding hoses are engineered to be compatible with cement and concrete mixtures, ensuring that the hose material does not react or degrade when in contact with these materials. 5. Size and fittings: Cement feeding hoses are available in various diameters and lengths to suit different applications. They can be fitted with standard couplings or connections for easy attachment to pumping equipment or other components of the cement delivery system. It is essential to follow the manufacturer's guidelines and recommendations for the proper selection, installation, use, and maintenance of cement feed
Additional Information:
Payment Terms : T/T
Packaging Details : Packing with HDPE Cover
The packing details of a cement feeding rubber hose can vary depending on the manufacturer, supplier, and specific product. However, here are some general packing details that you may commonly find:
1. Quantity: The packaging should indicate the number of cement feeding rubber hoses included in a single pack. It can range from one hose to multiple hoses, depending on the packaging configuration and the supplier's specifications.
2. Length: The packaging may specify the length of the hose, indicating the total measurement from end to end. This information helps determine if the hose length is suitable for the intended application.
3. Diameter/Size: The packaging should mention the hose diameter or size, indicating the internal or external diameter of the hose. This information helps ensure compatibility with the cement transfer equipment and connections.
4. Material: The packaging may mention the specific rubber material used for the hose, such as synthetic rubber with abrasion resistance properties or other specialized compounds. This information confirms that the product is made from the intended material.
5. Pressure Rating: The packaging may indicate the pressure rating of the cement feeding rubber hose, providing information about the maximum pressure the hose can handle safely during cement transfer.
6. Color: In some cases, the packaging may specify the color of the hose. While black is a common color for rubber hoses, other colors may be available depending on the manufacturer's specifications or customer preferences.
7. Packaging Material: The packaging itself may be mentioned, indicating the type of packaging material used, such as cardboard boxes, plastic bags, or reels. The packaging should provide sufficient protection to prevent damage during transportation and storage.
It's important to note that the specific details may vary depending on the manufacturer, the product variation, and the specific requirements of the industry or application. Therefore, it is always recommended to refer to the packaging or contact the manufacturer or supplier directly for accurate and up-to-date information regarding the packaging details of a particular cement feeding rubber hose.
Delivery Time : 7 to 15days
Ms. Sandhya Chaudhary (Sandhya Enterprises)
5-24-1223/5/1, Ambedkar Nagar, Gajularamaram, Quatubulapur, R. R. Dist, Hyderabad, Telangana - 500055, India
https://www.sandhyaflex.co.in
Share us via
