VPL Infotech & Consultants - Milling Machines

• It has coolant system with removable collector.
• The system installed in a metallic enclosure with 6 height, open able front door, acrylic front and side cover and display panel.
• It has mechanical storage system on the bottom for Computer system, Controller, UPS and for Electrical wiring.
• The system supplied with PC with Intel Pentium-IV CPU @ 2.4GHz, 512MB RAM, 52X DVD Writer, Optical Mouse, 15 TFT Monitor & Keyboard.

• The system installed in a metallic enclosure with 5 height, openable front door, acrylic front and side cover and withdisplay panel.
• It has coolant system with removable collector.
• It has mechanical storage system on the bottom for Computer system, Controller, UPS and for Electrical wiring.
• The system supplied with PC with Intel Pentium-IV CPU @ 2.4 GHz, 512MB RAM, 52X DVD Writer, Optical Mouse, 15 TFT Monitor & Keyboard.

We are a major CNC Milling Machine (VPL-CNC-15M) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• Stepping Motor
  • Step angle : 1.8 degree
  • Number of Phase : 2
  • Hold torque : 4.4 kg.cm
  • Rated current/Phase : 1.68 amps.
  • Phase resistance : 1.65 ohms
  • Voltage/Phase : 2.77 VDC
• The system installed in a metallic enclosure with 5' height, openable front door, acrylic front and side cover and with display panel. Supplied with compatible PC

We are a major CNC Milling Machine (VPL-CNC-26) Exporter & Supplier in India. Machine Features

• Rapid Travel of 30 in/min.
• Universal Standard G-Code import.
• Adjustable tapered brass gib on X-axis.
• Ground steel sliding ways with adjustable brass gib.
• Hard anodized aluminum table.
• 1/2" (12.7mm) 20 pitch Cr-Mo leadscrews with adjustable split bronze nuts on all axes.
• It has coolant system with removable collector, mechanical storage system on the bottom for Computer system, Controller and for Electrical wiring.
• The system supplied with PC with Intel Pentium-IV CPU @ 2.4 GHz, 512MB RAM, 52X DVD Writer, Optical Mouse, 15 TFT Monitor & Keyboard.
• CNC Milling Machine available With Cabinet

We are a major CNC Milling Machine CNC Milling Machine (VPL-CNC-20L) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• The speed of the spindle : 100-2250 r/min
• The max. speed of moving (X, Z) : 2000 mm/min
• The speed of feeding (X, Z) : 500 mm/min
• Max. travel - X axis : 150 mm
• Motor of X axis : 1.35 Nm
• Tool position : 4
• Angle of the tool post : 360^o
• Travel of tailstock : 50 mm
• Position accuracy : 0.015 mm
• Repeatability accuracy : 0.01 mm
• Tool post return orientation precision : 0.005 mm
• Main motor power : 600W

We are a major CNC Milling Machine (VPL-CNC-10M) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• Hole through spindle : .405" (10 mm)
• Spindle nose thread : 3/4-16 T.P.I.
• Spindle taper : #1 Morse
• Drill chuck : 1/4"
• Handwheel graduations : 0.01 mm
• Table size : 2.75" x 13.00" (70 x 330 mm)
• Hold down provision : 2 "T" Slots
• Motor : 90 Volt DC, input 220 VAC, 50 Hz
• Spindle speed range : 70-2800 RPM continuously variable by electronic speed control

We are a major CNC Milling Machine (VPL-CNC-10L) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• Travel of crosslide : 4.25" (110 mm)
• Taper of tailstock spindle : #0 Morse.
• Protractor graduations : 0^o to 45^o by 5^o
• Handwheel graduations : .0.01 mm
• Motor : 90 Volt DC, input 220V/50Hz.
• Spindle speed range : 70-2800 RPM.
• CNC stepper motor holding torque : 136 oz-in
• It has mechanical storage system on the bottom for Computer system, Controller and for Electrical wiring.
• The system supplied with PC with Intel Pentium-IV CPU @ 2.4 GHz, 512MB RAM, 52X DVD Writer, Optical Mouse, 15 TFT Monitor & Keyboard.

We are a major CNC Milling Machine (VPL-CNC-14M) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• Motor of Z axis : 1.9Nm
• Table T-slot size : 12mm
• Drilling capacity : 3mm to 16mm
• No. of T-slots on table : 3
• Position accuracy : 0.01
• Spindle taper : MT3/R8
• Speed of spindle : 60-2100 (F) / 60-1000 (R)
• Max. spindle motor torque : 3.5 Nm
• Spindle motor power : 600W
• Precise manual milling also possible
• Power requirement : 220AC 50/60Hz
• It has coolant system with removable collector.

We are a major CNC Milling Machine (VPL-CNC-90) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• Table Surface : T-slot extrusions
• Frame : Cast Iron
• Resolution : 0.015mm
• Least Count : 0.01mm
• Dictate Formate : G, M, S, X, Y, Z Codes
• Cycles : Drilling, peak drilling
• Operating Voltage : AC220/50Hz
• Software : Mach3, ArtCAM software/ARTCAM/CAXA
• Interpolation : Linear Interpolation
• Gross Weight : 205kg

We are a major CNC Milling Machine (VPL-CNC-28 SIEMENS) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• Pitch-inch : 8-56TPI
• X travel : 130mm
• Z travel : 465 mm
• X rapid speed : 3000mm/min
• Z rapid speed : 2500mm/min
• X positioning accuracy : 0.03
• Z positioning accuracy : 0.032
• X repeatability positioning accuracy : 0.012
• Z repeatability positioning accuracy : 0.013
• Motor power : 2.2KW 230V50Hz
• Packing size : 2220x820x1720mm

We are a major CNC Milling Machine (VPL-2118) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• The speed of spindle : 100-3000 r/min
• The max. speed of moving : Z, X = 2000 mm/min
• The speed of feeding : Z = 500 mm/min, X = 250 mm/min
• Max. travel : Z axis : 320 mm (13"), X axis : 90 mm (3.5")
• Motor of X-Y axis : 4 N-m
• Taper of tailstock : MT2
• Travel of tailstock : 50 mm (2")
• Position accuracy : 0.015 mm
• Repeatability position accuracy : 0.01 mm
• Tool post return orientation precision : 0.005 mm
• Main motor power : 1000W

We are a major CNC Milling Machine (VPL-M2-SIEMENS) Exporter & Supplier in India. CNC Milling Machine available With Cabinet. Specifications

• T-slot size/Distance/Number : 12mm/63mm/3
• Working table size : 700x180mm
• Travel: Z : 270mm, Y : 159mm, X : 480mm
• Rate of feed Z axis : 2000mm/min
• Rate of feed Y axis : 3000mm/min
• Rate of feed X axis : 3000mm/min
• Positioning accuracy : ±0.025/300mm
• Repeatability positioning accuracy : ±0.01mm
• Motor power : 850W/230V50Hz
• Coolant pump : 40W

We offer a huge assortment of CNC Milling Machine (VPL-CNC-2010). 8 Directional Vertical Milling. Specifications

• Throat : Adjustable
• Travel
  • X Axis : 229 mm
  • Y Axis : 178 mm
  • Z Axis : 137 mm
• Motor : 90 Volt DC with electronic speed control automatically converts any input from 100 VAC to 240VAC, 50 or 60 Hz
• Spindle speed range : 70-2800 RPM continuously variable by electronic speed control

The CNC Milling Machine (VPL-CNC-15) is a perfect CNC router for prototyping, teach, learning, hobby, and small parts. Working under mach3 and/or EMC2 sotware. Operating under Windows and Linux system. CNC Milling Machine available With Cabinet. Specifications

• Drill chuck : 1/4"
• Material : Constructed of aluminum alloy (ANODIZING)
• Stepping Motor : Hold torque : 4.4 kg.cm
• Net weight (approx.) : 12.5 Kg.

The Deluxe Model CNC Milling Machine (VPL-CNC-5410) metric comes equipped with all standard features upgraded to include a laser engraved 12" (305mm) solid aluminum base etc. Specification

• Spindle nose thread : 3/4-16 T.P.I.
• Spindle taper : #1 Morse
• Handwheel graduations : 0.01 mm
• Table size : 70 x 330 mm
• Hold down provision : 2 "T" Slots
• Spindle speed range : 70-2800 RPM