Locally Manufactured Galvanized Cable Tray, Certification : ISO 9001:200 Certfied

Cable trays are used to support and organize cables in electrical installations. Here’s a brief overview of the main types and their typical sizes:

### 1. **Ladder Cable Tray**

   - **Description**: Consists of two longitudinal side rails connected by individual rungs. Suitable for heavy-duty cables and allowing for maximum air circulation.

   - **Sizes**: Common widths range from 150 mm to 900 mm, with heights from 25 mm to 150 mm. Lengths usually range from 2.4 m to 6 m.

### 2. **Perforated Cable Tray**

   - **Description**: Solid bottom with perforated holes to allow ventilation. Used for lightweight cable installations.

   - **Sizes**: Typically available in widths from 50 mm to 900 mm and heights from 25 mm to 100 mm. Lengths are often 2.4 m to 3 m.

### 3. **Solid Bottom Cable Tray**

   - **Description**: Completely enclosed trays that provide maximum protection to cables, often used for sensitive or high-voltage cables.

   - **Sizes**: Commonly available in widths from 50 mm to 600 mm, with heights from 25 mm to 150 mm. Lengths usually range from 2.4 m to 3 m.

### 4. **Wire Mesh Cable Tray (Basket Tray)**

   - **Description**: Made from steel wires welded together to form a basket shape. Often used for data cables and light-duty installations.

   - **Sizes**: Standard widths range from 50 mm to 600 mm, with heights from 25 mm to 100 mm. Lengths usually around 3 m.

### 5. **Channel Cable Tray**

   - **Description**: A single solid or perforated bottom channel. Suitable for smaller cable runs.

   - **Sizes**: Available in widths from 50 mm to 200 mm and heights from 25 mm to 75 mm. Lengths typically around 3 m.

### 6. **Trough Cable Tray**

   - **Description**: Similar to a solid bottom tray but with ventilated sides. Offers more protection than a perforated tray.

   - **Sizes**: Common widths are 100 mm to 600 mm, heights 25 mm to 100 mm. Lengths range from 2.4 m to 3 m.

These sizes can vary slightly depending on manufacturers and specific installation requirements.