Company Information
Member Since 14 Years
Nature of Business Retailer
GST No. 27AMWPN0079L1Z9Ask for more detail from the seller
Contact Supplier
This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution. The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever. Total number of revolution at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirement of IS 5075-1969.
Features
| Specification | Unit | MTMS-FTG-8 |
|---|---|---|
| Maximum Bending Moment | KG-CM | 200 |
| Bending Moment Adjustable | -- | 25-200 |
| Range I & Ii | -- | 25-125 |
| -- | -- | 125-200 |
| Gripping Dia Of Specimen | MM | 12 |
| Testing Dia Of Specimen | MM | 8 |
| Rotating Speed | RPM | 4200 |
| Digital Counter No. Of Digits | -- | 8 |
| Power Required | HP | 0.5 |
| Main Supply | -- | 3PH, 440V, 50 HZ A.C. |
| Over All Size | MM | 1000 L.X. |
| Weight (APPROX) | KG | 120 |
| Due to constant R&D specification are subject to change without notice | ||
Connect with us
For Buyer 
For Seller 
Help 
Ichalkaranji, Kolhapur, Maharashtra 
Send Enquiry